SIST ISO 3550:1995

Cigarettes -- Determination of loss of tobacco from the ends

Cigarettes -- Détermination des pertes de tabac par les extrémités

Cigarete - Določanje izgub tobaka na konceh cigaret

General Information

• Status: Withdrawn
• Publication Date: 30-Apr-1995
• Withdrawal Date: 31-Jan-1998
• ICS: 65.160 - Tobacco, tobacco products and related equipment
• Technical Committee: TIT - Tobaco and tobaco products
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Feb-1998
• Due Date: 01-Feb-1998
• Completion Date: 01-Feb-1998
• Ref Project: ISO 3550:1985 - Cigarettes — Determination of loss of tobacco from the ends

Relations

• Revised: SIST ISO 3550-2:1998 - Cigarettes -- Determination of loss of tobacco from the ends -- Part 2: Method using a rotating cubic box (sismelatophore)
• Effective Date: 12-May-2008
• Revised: ISO 3550-2:1997 - Cigarettes — Determination of loss of tobacco from the ends — Part 2: Method using a rotating cubic box (sismelatophore)
• Effective Date: 12-May-2008
• Revised: SIST ISO 3550-1:1998 - Cigarettes -- Determination of loss of tobacco from the ends -- Part 1: Method using a rotating cylindrical cage
• Effective Date: 12-May-2008
• Revised: ISO 3550-1:1997 - Cigarettes — Determination of loss of tobacco from the ends — Part 1: Method using a rotating cylindrical cage
• Effective Date: 12-May-2008
• Revised: ISO 3550:1975 - Tobacco and tobacco products — Cigarettes — Determination of loss of tobacco from the ends
• Effective Date: 12-May-2008

Standards Content (Sample)

International Standard @ 3550
INTERNATIONAL ORGANIZATION FOR STANDARDIZATlON*MEXLIYHAPOLIHAR OPTAHMJAUHR Il0 CTAHAAPTH3AUMH*ORGANISATlON INTERNATIONALE DE NORMALISATION
Cigarettes - Determination of loss of tobacco from
the ends
Cigarettes - Détermination des pertes de tabac par les extrémités
Second edition - 1985-05-15
UDC 663.974 : 620.1 Ref. No. IS0 3350-1985 (E)
Descriptors : cigarettes, tests, vibration tests, determination, losses, tobacco.
Price based on 3 pages

---------------------- Page: 1 ----------------------
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of preparing International
Standards is normally carried out through IS0 technical committees. Each member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council. They are approved in accordance with IS0 procedures requiring at
least 75 % approval by the member bodies voting.
International Standard IS0 3550 was prepared by Technical Committee ISO/TC 126,
Tobacco and tobacco products.
IS0 3550 was first published in 1975. This second edition cancels and replaces the first
edition, of which it constitutes a minor revision.
e
O International Organization for Standardization, 1985
Printed in Switzerland

---------------------- Page: 2 ----------------------
INTERNATIONAL STANDARD IS0 3550-1985 (E)
Cigarettes - Determination of loss of tobacco from
the ends
O Introduction 4 Apparatus
The loss of tobacco from the ends of cigarettes, which par-
Conditioning enclosure, regulated in accordance with
4.1
ticularly affects short strands, is an irritating phenomenon to
the requirements of IS0 3402.
which the consumer is very sensitive. Agitation of cigarettes
favours this loss; it is in the smoker’s pocket that this effect is
most noticeable, more particularly when the packet has been
4.2 Vibrating box (see the figure), consisting of
opened. From this standpoint the greater a cigarette’s
resistance to this loss the higher its quality.
a) a cubic box of polymethylmethacrylate or any other
plastics material having equivalent properties, the inside
The vibrating box apparatus (sismelatophore) designed to
edge of which measures 140 f 5 mm, held by two trihedral
determine, under reproducible conditions, the tendency of the
supports in such a way that one of the principal diagonals is
ends of cigarettes to lose their contents, is described in 4.2.
horizontal. One of the faces of the cubic box can be opened
(groove or hinge) :
1 Scope and field of application
b) one half-spindle, clamped to a timing micromotor
device, which rotates the cube at 60 f 2 min-’. The other
This International Standard specifies a method for the deter-
half-spindle supports a spring which holds the cube in posi-
loss of tobacco from the ends of cigarettes.
mination of the
tion during rotation; it allows the cube to be freed for filling
or emptying;
2 References
c) a time-switch for regulating the time of operation of the
micromotor.
IS0 2971, Tobacco and tobacco products - Cigarettes and
filters - Determination of nominal diameter.
4.3 Analytical balance.
IS0 3402, Tobacco and tobacco products - Atmospheres for
conditioning and testing.
5 Sampling
ISO6488, Tobacco - Determination of water content
(Reference method).
Sampling of cigarettes for sale to the public will form the sub-
ject of a future International Standard.
3 Principle
Subjection of a test portion of a given number of ci
...

SLOVENSKI STANDARD
SIST ISO 3550:1995
01-maj-1995
&LJDUHWH'RORþDQMHL]JXEWREDNDQDNRQFHKFLJDUHW
Cigarettes -- Determination of loss of tobacco from the ends
Cigarettes -- Détermination des pertes de tabac par les extrémités
Ta slovenski standard je istoveten z: ISO 3550:1985
ICS:
65.160 7REDNWREDþQLL]GHONLLQ Tobacco, tobacco products
RSUHPD and related equipment
SIST ISO 3550:1995 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 3550:1995

---------------------- Page: 2 ----------------------

SIST ISO 3550:1995
International Standard @ 3550
INTERNATIONAL ORGANIZATION FOR STANDARDIZATlON*MEXLIYHAPOLIHAR OPTAHMJAUHR Il0 CTAHAAPTH3AUMH*ORGANISATlON INTERNATIONALE DE NORMALISATION
Cigarettes - Determination of loss of tobacco from
the ends
Cigarettes - Détermination des pertes de tabac par les extrémités
Second edition - 1985-05-15
UDC 663.974 : 620.1 Ref. No. IS0 3350-1985 (E)
Descriptors : cigarettes, tests, vibration tests, determination, losses, tobacco.
Price based on 3 pages

---------------------- Page: 3 ----------------------

SIST ISO 3550:1995
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of preparing International
Standards is normally carried out through IS0 technical committees. Each member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council. They are approved in accordance with IS0 procedures requiring at
least 75 % approval by the member bodies voting.
International Standard IS0 3550 was prepared by Technical Committee ISO/TC 126,
Tobacco and tobacco products.
IS0 3550 was first published in 1975. This second edition cancels and replaces the first
edition, of which it constitutes a minor revision.
e
O International Organization for Standardization, 1985
Printed in Switzerland

---------------------- Page: 4 ----------------------

SIST ISO 3550:1995
INTERNATIONAL STANDARD IS0 3550-1985 (E)
Cigarettes - Determination of loss of tobacco from
the ends
O Introduction 4 Apparatus
The loss of tobacco from the ends of cigarettes, which par-
Conditioning enclosure, regulated in accordance with
4.1
ticularly affects short strands, is an irritating phenomenon to
the requirements of IS0 3402.
which the consumer is very sensitive. Agitation of cigarettes
favours this loss; it is in the smoker’s pocket that this effect is
most noticeable, more particularly when the packet has been
4.2 Vibrating box (see the figure), consisting of
opened. From this standpoint the greater a cigarette’s
resistance to this loss the higher its quality.
a) a cubic box of polymethylmethacrylate or any other
plastics material having equivalent properties, the inside
The vibrating box apparatus (sismelatophore) designed to
edge of which measures 140 f 5 mm, held by two trihedral
determine, under reproducible conditions, the tendency of the
supports in such a way that one of the principal diagonals is
ends of cigarettes to lose their contents, is described in 4.2.
horizontal. One of the faces of the cubic box can be opened
(groove or hinge) :
1 Scope and field of application
b) one half-spindle, clamped to a timing micromotor
device, which rotates the cube at 60 f 2 min-’. The other
This International Standard specifies a method for the deter-
half-spindle supports a spring which holds the cube in posi-
loss of tobacco from the ends of cigarettes.
mination of the
tion during rotation; it allows the cube to be freed for filling
or emptying;
2 References
c) a time-switch for regulating the time of operation of the
micromotor.
IS0 2971, Tobacco and tobacco products - Cigarettes and
filters - Determination of nominal diameter.
4.3 An
...

Norme internationale @ 3550
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION*MEXAYHAPOAHAR OPrAHH3AUMR flO CTAHAAPTl43AUkll4*ORGANISATlON INTERNATIONALE DE NORMALISATION
Cigarettes - Détermination des pertes de tabac par les
* extrémités
Cigarettes - Determination of loss of tobacco from the ends
Deuxième édition - 1985-05-15
- 5 CDU 663.974:620.1 Réf. no : IS0 3550-1985 (FI
8
Descripteurs : cigarette, essai, essai de vibration, détermination, perte, tabac.
Prix basé sur 3 pages

---------------------- Page: 1 ----------------------
J
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale
d'organismes nationaux de normalisation (cornités membres de I'ISO). L'élaboration
des Normes internationales est confiée aux comités techniques de I'ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
créé à cet effet. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I'ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I'ISO. Les Normes internationales sont approuvées confor-
mément aux procédures de I'lSO qui requièrent l'approbation de 75 % au moins des
comités membres votants.
La Norme internationale IS0 3550 a été élaborée par le comité technique ISO/TC 126,
Tabac et produits du tabac.
L'ISO 3550 a été pour la première fois publiée en 1975. Cette deuxième édition annule
et remplace fa première édition, dont elle constitue une révision mineure.
0 Organisation internationale de normalisation, 1985 O
Imprimé en Suisse

---------------------- Page: 2 ----------------------
N O R M E I NTE R NAT1 O NA LE IS0 3550-1985 (F)
Cigarettes - Détermination des pertes de tabac par les
extrémités
4 Appareillage
O Introduction
La perte de tabac par les extrémités des cigarettes, qui affecte
4.1 Enceinte de conditionnement, réglée selon les spécifi-
plus particulièrement les brins courts, est un phénomène
cations de VISO 3402.
gênant auquel le consommateur est très sensible. Cette perte
est favorisée par une agitation des cigarettes; c'est dans la
poche du fumeur que cette agitation est le plus sensible, plus Sismélatophore (voir la figure), comprenant
4.2
Particulièrement lorsque le paquet est entamé. À ce titre, on
dira qu'une cigarette est de qualité d'autant meilleure qu'elle
a) une boîte cubique en polyméthacrylate de méthyle ou
à la perte par les extrémités.
résiste mieux
autre matière plastique similaire de caractéristiques équiva-
lentes, dont l'arête intérieure mesure 140 k 5 mm, main-
L'appareil sismélatophore conçu pour déterminer, dans des
tenu par deux supports trièdres de telle sorte qu'une des
conditions reproductibles, la tendance des extrémités de ciga-
diagonales principales soit horizontale; l'une des faces de
rettes à se vider de leur contenu, est décrit en 4.2.
la boîte est ouvrante Iglissière ou charnière) ;
b) un demi-axe, calé sur un micromoteur, qui entraîne le
1 Objet et domaine d'application
cube en rotation à 60 f 2 min -'; l'autre demi-axe supporte
un ressort qui maintient en place le cube pendant la rota-
La présente Norme internationale spécifie une méthode de
tion; il permet de libérer le cube pour le remplir ou le vider;
détermination des pertes de tabac par les extrémités des ciga-
rettes.
une minuterie commandant le temps de marche du
c)
micromoteur.
2 Références
4.3 Balance analytique.
IS0 2971, Tabac et produits du tabac - Cigarettes et filtres -
Détermination du diamètre nominal.
IS0 3402, Tabac et produits du tabac - Atmosphère de condi-
5 Échantillonnage
tionnement et d'essai.
L'échantillonnage des cigarettes offertes à la vente au public
IS0 6488, Tabac - Détermination de la teneur en eau
fera l'objet d'une Norme internationale ultérieure.
(Méthode de référencel.
3 Principe
6 Mode opératoire
L'essai consiste à faire subir à une prise d'essai d'un nombre
6.1 Conditionnement de
...