SIST EN 300 065 V2.1.2:2016
(Main)Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (NAVTEX) - Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU
Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (NAVTEX) - Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU
The present document states the minimum requirements for a Narrow-Band Direct-Printing (NBDP) maritime receiver
operating in the NAVTEX system.
The equipment's function is to receive, display and/or print automatically and continuously, meteorological and
navigational messages and Search And Rescue (SAR) messages transmitted by coast stations participating in the
NAVTEX system.
The present document also specifies technical characteristics, methods of measurement and required test results.
The present document contains requirements to demonstrate that "... Radio equipment shall be so constructed that it both
effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference" [i.4] and that
"....radio equipment supports certain features ensuring access to emergency services" [i.4].
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the Radio Equipment Directive [i.4] may apply to equipment within the scope of the
present document.
Ozkopasovna telegrafska oprema z neposrednim tiskanjem za sprejemanje meteoroloških ali navigacijskih informacij (NAVTEX) - Harmonizirani standard, ki zajema bistvene zahteve členov 3.2 in 3.3(g) direktive 2014/53/EU
V tem dokumentu so navedene minimalne zahteve za ozkopasovni neposredno pisalni (NBDP) pomorski sprejemnik, ki deluje v sistemu NAVTEX.
Funkcija opreme je samodejno ter neprekinjeno sprejemanje, prikaz in/ali tiskanje meteoroloških ter navigacijskih sporočil in sporočil za iskanje in reševanje (SAR), ki jih oddajajo obalne postaje, ki sodelujejo v sistemu NAVTEX.
Ta dokument določa tudi tehnične lastnosti, merilne metode in zahtevane rezultate preskusov.
Ta dokument vsebuje zahteve, s katerimi se dokazuje, da velja »... radijska oprema je izdelana tako, da optimalno uporablja in podpira učinkovito izrabo radijskega spektra, z namenom preprečevanja škodljivega motenja« [i.4], ter da »... radijska oprema podpira določene funkcije za dostop do storitev reševanja« [i.4].
Poleg tega dokumenta se za opremo na področju uporabe tega dokumenta lahko uporabljajo tudi drugi standardi EN, ki določajo tehnične zahteve v zvezi z bistvenimi zahtevami iz drugih delov 3. člena direktive o radijski opremi [i.4].
General Information
Buy Standard
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.DQMHNarrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (NAVTEX) - Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU47.020.70Navigacijska in krmilna opremaNavigation and control equipment33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:ETSI EN 300 065 V2.1.2 (2016-06)SIST EN 300 065 V2.1.2:2016en01-september-2016SIST EN 300 065 V2.1.2:2016SLOVENSKI
STANDARD
SIST EN 300 065 V2.1.2:2016
ETSI EN 300 065 V2.1.2 (2016-06) Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (NAVTEX); Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU
HARMONISED EUROPEAN STANDARD SIST EN 300 065 V2.1.2:2016
ETSI ETSI EN 300 065 V2.1.2 (2016-06) 2
Reference REN/ERM-TG26-530 Keywords harmonised standard, maritime, NAVTEX, radio ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2016. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 300 065 V2.1.2:2016
ETSI ETSI EN 300 065 V2.1.2 (2016-06) 3 Contents Intellectual Property Rights . 6 Foreword . 6 Modal verbs terminology . 6 1 Scope . 7 2 References . 7 2.1 Normative references . 7 2.2 Informative references . 7 3 Definitions and abbreviations . 8 3.1 Definitions . 8 3.2 Abbreviations . 8 4 General and operational requirements . 8 4.0 General . 8 4.1 Construction . 8 4.2 Receivers . 9 4.3 Handling of messages . 9 4.4 Alarms . 10 4.5 Safety precautions . 11 5 Test conditions, power supply and ambient temperatures . 11 5.0 Environmental profile . 11 5.1 General . 11 5.1.0 Conditions . 11 5.1.1 Artificial antennas . 12 5.1.2 Normal test signal . 12 5.1.3 Test signals applied to the receiver input . 12 5.2 Test power source . 12 5.3 Normal test conditions . 12 5.3.1 Normal temperature and humidity . 12 5.3.2 Normal test power supply . 13 5.3.2.1 Mains voltage and frequency . 13 5.3.2.2 Power source from a battery. 13 5.3.2.3 Other power sources . 13 5.4 Extreme test conditions . 13 5.4.1 Extreme temperatures . 13 5.4.2 Extreme test power supply values . 13 5.4.2.1 Extreme mains voltage and frequency . 13 5.4.2.2 Power source from a battery. 13 5.4.2.3 Other power sources . 13 5.5 Procedures for tests at extreme temperatures . 13 5.6 Environmental tests . 14 5.6.0 General . 14 5.6.1 Vibration test . 14 5.6.1.1 Method of measurement . 14 5.6.1.2 Requirement . 14 5.6.2 Temperature tests . 14 5.6.2.1 Dry heat for externally mounted equipment (if declared by manufacturer) . 14 5.6.2.1.1 Method of measurement . 14 5.6.2.1.2 Requirement . 15 5.6.2.2 Damp heat cycle . 15 5.6.2.2.1 Method of measurement . 15 5.6.2.2.2 Requirement . 15 5.6.2.3 Low temperature cycle for externally mounted equipment (if declared by manufacturer) . 15 5.6.2.3.1 Method of measurement . 15 5.6.3 Corrosion test . 16 5.6.3.1 General . 16 SIST EN 300 065 V2.1.2:2016
ETSI ETSI EN 300 065 V2.1.2 (2016-06) 4 5.6.3.2 Method of measurement . 16 5.6.3.3 Requirements . 16 5.6.4 Rain test (if declared by manufacturer). 17 5.6.4.1 General . 17 5.6.4.2 Method of measurement . 17 5.6.4.3 Requirements . 17 6 Receiver and signal processor . 17 6.1 Call sensitivity . 17 6.1.1 Definition . 17 6.1.2 Method of measurement . 17 6.1.3 Limit . 18 6.2 Interference rejection and blocking immunity . 18 6.2.1 Definition . 18 6.2.2 Method of measurement . 18 6.2.3 Limit . 18 6.3 Co-channel rejection. 18 6.3.1 Definition . 18 6.3.2 Method of measurement . 18 6.3.3 Limit . 19 6.4 Intermodulation . 19 6.4.1 Definition . 19 6.4.2 Method of measurement . 19 6.4.3 Limit . 19 6.5 Spurious emissions . 19 6.5.1 Definition . 19 6.5.2 Method of measurement . 19 6.5.3 Limit . 20 6.6 Protection of input circuits . 20 6.7 Simultaneous reception . 20 6.7.1 Definition . 20 6.7.2 Method of measurement . 20 6.7.3 Limit . 20 6.8 Message processing . 20 6.8.1 B1 tests . 20 6.8.2 B2 tests . 21 6.8.3 Receiver test facility . 21 6.8.4 SAR message alarm test . 21 6.8.5 Additional alarm test . 21 6.9 Integrated printer tests . 21 6.9.1 Out of paper alarm and storage inhibition . 21 6.9.2 Automatic line and paper feed . 21 6.9.3 Corrupted characters . 22 6.9.4 Corrupted characters in the preamble . 22 6.9.5 Messages with B3,B4 = 00 . 22 6.10 Memory storage tests. 22 6.10.1 Storage, tagging and erasure . 22 6.10.2 Erasure of messages by timeout . 22 6.10.3 Storage of message identifications . 23 7 Integrated printing device . 23 7.1 General . 23 7.2 Printing . 23 8 Dedicated display device . 24 8.1 General . 24 8.2 Display characteristics . 24 9 Interfaces . 24 9.1 Printer . 24 9.2 Data . 24 10 Message memory . 25 10.1 General requirements . 25 SIST EN 300 065 V2.1.2:2016
ETSI ETSI EN 300 065 V2.1.2 (2016-06) 5 10.2 Equipment without an integrated printing device . 25 10.3 Equipment with an integrated printing device . 25 11 Testing for compliance with technical requirements . 25 11.1 Test conditions, power supply and ambient temperatures . 25 11.2 Interpretation of the measurement results . 25 Annex A (normative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 27 History . 29
SIST EN 300 065 V2.1.2:2016
ETSI ETSI EN 300 065 V2.1.2 (2016-06) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https://ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.7] to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC [i.4]. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in tables A.1 and A.2 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. Technical specifications relevant to Directive 2014/53/EU [i.4] are given in annex A.
National transposition dates Date of latest announcement of this EN (doa): 30 September 2016 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 March 2017 Date of withdrawal of any conflicting National Standard (dow): 31 March 2018
Modal verbs terminology In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). "must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation. SIST EN 300 065 V2.1.2:2016
ETSI ETSI EN 300 065 V2.1.2 (2016-06) 7 1 Scope The present document states the minimum requirements for a Narrow-Band Direct-Printing (NBDP) maritime receiver operating in the NAVTEX system. The equipment's function is to receive, display and/or print automatically and continuously, meteorological and navigational messages and Search And Rescue (SAR) messages transmitted by coast stations participating in the NAVTEX system. The present document also specifies technical characteristics, methods of measurement and required test results. The present document contains requirements to demonstrate that ". Radio equipment shall be so constructed that it both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference" [i.4] and that ".radio equipment supports certain features ensuring access to emergency services" [i.4]. In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the Radio Equipment Directive [i.4] may apply to equipment within the scope of the present document. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. [1] Recommendation ITU-R M.625-4 (03-2012): "Direct-printing telegraph equipment employing automatic identification in the maritime mobile service". [2] Recommendation ITU-R M.540-2 (06-1990): "Operational and technical characteristics for an automated direct-printing telegraph system for promulgation of navigational and meteorological warnings and urgent information to ships". 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. [i.1] Recommendation ITU-R M.541-9: "Operational procedures for the use of digital selective-calling equipment in the maritime mobile service". [i.2] IEC 60529 (2001-02) Ed. 2.1 Bilingual Consolidated Edition: "Degrees of protection provided by enclosures (IP Code)". SIST EN 300 065 V2.1.2:2016
ETSI ETSI EN 300 065 V2.1.2 (2016-06) 8 [i.3] IEC 61162-1 (2008): "Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners". [i.4] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC. [i.5] ETSI TR 100 028 (all parts): "Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics". [i.6] ETSI TR 100 028-2: "Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics; Part 2". [i.7] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request to the European Committee for Electrotechnical Standardisation and to the European Telecommunications Standards Institute as regards radio equipment in support of Directive 2014/53/EU of the European Parliament and of the Council. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: dBA: "A" weighted dB noise level measured at a distance of 1 metre 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ACK ACKnowledgement ALR Alarm emf electro-motive force EUT Equipment Under Test INS Integrated Navigation System MSGS Messages NAVTEX NAVigational TelEX NBDP Narrow-Band Direct-Printing r.m.s. root mean square RF
...
ETSI EN 300 065 V2.1.2 (2016-06)
HARMONISED EUROPEAN STANDARD
Narrow-band direct-printing telegraph equipment
for receiving meteorological or navigational
information (NAVTEX);
Harmonised Standard covering the essential requirements
of articles 3.2 and 3.3(g) of the Directive 2014/53/EU
---------------------- Page: 1 ----------------------
2 ETSI EN 300 065 V2.1.2 (2016-06)
Reference
REN/ERM-TG26-530
Keywords
harmonised standard, maritime, NAVTEX, radio
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2016.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 300 065 V2.1.2 (2016-06)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions and abbreviations . 8
3.1 Definitions . 8
3.2 Abbreviations . 8
4 General and operational requirements . 8
4.0 General . 8
4.1 Construction . 8
4.2 Receivers . 9
4.3 Handling of messages . 9
4.4 Alarms . 10
4.5 Safety precautions . 11
5 Test conditions, power supply and ambient temperatures . 11
5.0 Environmental profile . 11
5.1 General . 11
5.1.0 Conditions . 11
5.1.1 Artificial antennas . 12
5.1.2 Normal test signal . 12
5.1.3 Test signals applied to the receiver input . 12
5.2 Test power source . 12
5.3 Normal test conditions . 12
5.3.1 Normal temperature and humidity . 12
5.3.2 Normal test power supply . 13
5.3.2.1 Mains voltage and frequency . 13
5.3.2.2 Power source from a battery. 13
5.3.2.3 Other power sources . 13
5.4 Extreme test conditions . 13
5.4.1 Extreme temperatures . 13
5.4.2 Extreme test power supply values . 13
5.4.2.1 Extreme mains voltage and frequency . 13
5.4.2.2 Power source from a battery. 13
5.4.2.3 Other power sources . 13
5.5 Procedures for tests at extreme temperatures . 13
5.6 Environmental tests . 14
5.6.0 General . 14
5.6.1 Vibration test . 14
5.6.1.1 Method of measurement . 14
5.6.1.2 Requirement . 14
5.6.2 Temperature tests . 14
5.6.2.1 Dry heat for externally mounted equipment (if declared by manufacturer) . 14
5.6.2.1.1 Method of measurement . 14
5.6.2.1.2 Requirement . 15
5.6.2.2 Damp heat cycle . 15
5.6.2.2.1 Method of measurement . 15
5.6.2.2.2 Requirement . 15
5.6.2.3 Low temperature cycle for externally mounted equipment (if declared by manufacturer) . 15
5.6.2.3.1 Method of measurement . 15
5.6.3 Corrosion test . 16
5.6.3.1 General . 16
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 300 065 V2.1.2 (2016-06)
5.6.3.2 Method of measurement . 16
5.6.3.3 Requirements . 16
5.6.4 Rain test (if declared by manufacturer). 17
5.6.4.1 General . 17
5.6.4.2 Method of measurement . 17
5.6.4.3 Requirements . 17
6 Receiver and signal processor . 17
6.1 Call sensitivity . 17
6.1.1 Definition . 17
6.1.2 Method of measurement . 17
6.1.3 Limit . 18
6.2 Interference rejection and blocking immunity . 18
6.2.1 Definition . 18
6.2.2 Method of measurement . 18
6.2.3 Limit . 18
6.3 Co-channel rejection. 18
6.3.1 Definition . 18
6.3.2 Method of measurement . 18
6.3.3 Limit . 19
6.4 Intermodulation . 19
6.4.1 Definition . 19
6.4.2 Method of measurement . 19
6.4.3 Limit . 19
6.5 Spurious emissions . 19
6.5.1 Definition . 19
6.5.2 Method of measurement . 19
6.5.3 Limit . 20
6.6 Protection of input circuits . 20
6.7 Simultaneous reception . 20
6.7.1 Definition . 20
6.7.2 Method of measurement . 20
6.7.3 Limit . 20
6.8 Message processing . 20
6.8.1 B1 tests . 20
6.8.2 B2 tests . 21
6.8.3 Receiver test facility . 21
6.8.4 SAR message alarm test . 21
6.8.5 Additional alarm test . 21
6.9 Integrated printer tests . 21
6.9.1 Out of paper alarm and storage inhibition . 21
6.9.2 Automatic line and paper feed . 21
6.9.3 Corrupted characters . 22
6.9.4 Corrupted characters in the preamble . 22
6.9.5 Messages with B3,B4 = 00 . 22
6.10 Memory storage tests. 22
6.10.1 Storage, tagging and erasure . 22
6.10.2 Erasure of messages by timeout . 22
6.10.3 Storage of message identifications . 23
7 Integrated printing device . 23
7.1 General . 23
7.2 Printing . 23
8 Dedicated display device . 24
8.1 General . 24
8.2 Display characteristics . 24
9 Interfaces . 24
9.1 Printer . 24
9.2 Data . 24
10 Message memory . 25
10.1 General requirements . 25
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 300 065 V2.1.2 (2016-06)
10.2 Equipment without an integrated printing device . 25
10.3 Equipment with an integrated printing device . 25
11 Testing for compliance with technical requirements . 25
11.1 Test conditions, power supply and ambient temperatures . 25
11.2 Interpretation of the measurement results . 25
Annex A (normative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 27
History . 29
ETSI
---------------------- Page: 5 ----------------------
6 ETSI EN 300 065 V2.1.2 (2016-06)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.7] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.4].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in tables A.1 and A.2 confers, within the limits of the scope of the
present document, a presumption of conformity with the corresponding essential requirements of that Directive, and
associated EFTA regulations.
Technical specifications relevant to Directive 2014/53/EU [i.4] are given in annex A.
National transposition dates
Date of latest announcement of this EN (doa): 30 September 2016
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 March 2017
Date of withdrawal of any conflicting National Standard (dow): 31 March 2018
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 6 ----------------------
7 ETSI EN 300 065 V2.1.2 (2016-06)
1 Scope
The present document states the minimum requirements for a Narrow-Band Direct-Printing (NBDP) maritime receiver
operating in the NAVTEX system.
The equipment's function is to receive, display and/or print automatically and continuously, meteorological and
navigational messages and Search And Rescue (SAR) messages transmitted by coast stations participating in the
NAVTEX system.
The present document also specifies technical characteristics, methods of measurement and required test results.
The present document contains requirements to demonstrate that ". Radio equipment shall be so constructed that it both
effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference" [i.4] and that
".radio equipment supports certain features ensuring access to emergency services" [i.4].
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the Radio Equipment Directive [i.4] may apply to equipment within the scope of the
present document.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] Recommendation ITU-R M.625-4 (03-2012): "Direct-printing telegraph equipment employing
automatic identification in the maritime mobile service".
[2] Recommendation ITU-R M.540-2 (06-1990): "Operational and technical characteristics for an
automated direct-printing telegraph system for promulgation of navigational and meteorological
warnings and urgent information to ships".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Recommendation ITU-R M.541-9: "Operational procedures for the use of digital selective-calling
equipment in the maritime mobile service".
[i.2] IEC 60529 (2001-02) Ed. 2.1 Bilingual Consolidated Edition: "Degrees of protection provided by
enclosures (IP Code)".
ETSI
---------------------- Page: 7 ----------------------
8 ETSI EN 300 065 V2.1.2 (2016-06)
[i.3] IEC 61162-1 (2008): "Maritime navigation and radiocommunication equipment and systems -
Digital interfaces - Part 1: Single talker and multiple listeners".
[i.4] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.5] ETSI TR 100 028 (all parts): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Uncertainties in the measurement of mobile radio equipment characteristics".
[i.6] ETSI TR 100 028-2: "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Uncertainties in the measurement of mobile radio equipment characteristics; Part 2".
[i.7] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of
Directive 2014/53/EU of the European Parliament and of the Council.
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
dBA: "A" weighted dB noise level measured at a distance of 1 metre
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
ACK ACKnowledgement
ALR Alarm
emf electro-motive force
EUT Equipment Under Test
INS Integrated Navigation System
MSGS Messages
NAVTEX NAVigational TelEX
NBDP Narrow-Band Direct-Printing
r.m.s. root mean square
RF Radio Frequency
SAR Search And Rescue
STS Standard Test Signal
4 General and operational requirements
4.0 General
The manufacturer shall declare that compliance to the require
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.