oSIST prEN ISO 13628-8:2011
(Main)Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely operated tools and interfaces on subsea production systems (ISO/DIS 13628-8:2010)
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely operated tools and interfaces on subsea production systems (ISO/DIS 13628-8:2010)
This standard gives requirements and recommendations for the design and operation of subsea production systems (Remotely Operated Vehicle (ROV) interfaces and Remotely Operated Tool (ROT) intervention)
Erdöl- und Erdgasindustrie - Auslegung und Betrieb von Unterwasser-Fördersystemen - Teil 8: Fernbetätigte Werkzeuge und Schnittstellen auf Unterwasser-Produktionsanlagen (ISO/DIS 13628-8:2010)
Industries du pétrole et du gaz naturel - Conception et exploitation des systèmes de production immergés - Partie 8: Dispositifs à commande à distance et interfaces avec les systèmes de production immergés (ISO/DIS 13628-8:2010)
Industrija za predelavo nafte in zemeljskega plina - Načrtovanje in delovanje podvodnih proizvodnih sistemov - 8. del: Daljinsko vodena orodja in vmesniki za uporabo v podvodnih proizvodnih sistemih (ISO/DIS 13628-8:2010)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 13628-8:2011
01-april-2011
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD1DþUWRYDQMHLQGHORYDQMH
SRGYRGQLKSURL]YRGQLKVLVWHPRYGHO 'DOMLQVNRYRGHQDRURGMDLQYPHVQLNL]D
XSRUDERYSRGYRGQLKSURL]YRGQLKVLVWHPLK ,62',6
Petroleum and natural gas industries - Design and operation of subsea production
systems - Part 8: Remotely operated tools and interfaces on subsea production systems
(ISO/DIS 13628-8:2010)
Erdöl- und Erdgasindustrie - Auslegung und Betrieb von Unterwasser-Fördersystemen -
Teil 8: Fernbetätigte Werkzeuge und Schnittstellen auf Unterwasser-Produktionsanlagen
(ISO/DIS 13628-8:2010)
Industries du pétrole et du gaz naturel - Conception et exploitation des systèmes de
production immergés - Partie 8: Dispositifs à commande à distance et interfaces avec les
systèmes de production immergés (ISO/DIS 13628-8:2010)
Ta slovenski standard je istoveten z: prEN ISO 13628-8
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
oSIST prEN ISO 13628-8:2011 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 13628-8:2011
---------------------- Page: 2 ----------------------
oSIST prEN ISO 13628-8:2011
EUROPEAN STANDARD
DRAFT
prEN ISO 13628-8
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2010
ICS 75.180.10 Will supersede EN ISO 13628-8:2006
English Version
Petroleum and natural gas industries - Design and operation of
subsea production systems - Part 8: Remotely operated tools
and interfaces on subsea production systems (ISO/DIS 13628-
8:2010)
Industries du pétrole et du gaz naturel - Conception et Erdöl- und Erdgasindustrie - Auslegung und Betrieb von
exploitation des systèmes de production immergés - Partie Unterwasser-Fördersystemen - Teil 13: Fernbetätigte
8: Dispositifs à commande à distance et interfaces avec les Werkzeuge und Schnittstellen auf Unterwasser-
systèmes de production immergés (ISO/DIS 13628-8:2010) Produktionsanlagen (ISO/DIS 13628-8:2010)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 12.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 13628-8:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN ISO 13628-8:2011
prEN ISO 13628-8:2010 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
oSIST prEN ISO 13628-8:2011
prEN ISO 13628-8:2010 (E)
Foreword
This document (prEN ISO 13628-8:2010) has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries" in collaboration
with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries” the secretariat of which is held by AFNOR.
This document is currently submitted to the parallel Enquiry.
This document will supersede EN ISO 13628-8:2006.
Endorsement notice
The text of ISO/DIS 13628-8:2010 has been approved by CEN as a prEN ISO 13628-8:2010 without any
modification.
3
---------------------- Page: 5 ----------------------
oSIST prEN ISO 13628-8:2011
---------------------- Page: 6 ----------------------
oSIST prEN ISO 13628-8:2011
DRAFT INTERNATIONAL STANDARD ISO/DIS 13628-8
ISO/TC 67/SC 4 Secretariat: ANSI
Voting begins on Voting terminates on
2010-11-11 2011-04-11
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Petroleum and natural gas industries — Design and operation
of subsea production systems —
Part 8:
Remotely operated tools and interfaces on subsea production
systems
Industries du pétrole et du gaz naturel — Conception et exploitation des systèmes de production immergés —
Partie 8: Dispositifs à commande à distance et interfaces avec les systèmes de production immergés
[Revision of first edition (ISO 13628-8:2002) and first edition of (ISO 13628-9:2000)]
ICS 75.180.10
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO), and
processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments received, will be
submitted to a parallel two-month approval vote in ISO and formal vote in CEN.
In accordance with the provisions of Council Resolution 15/1993 this document is circulated in
the English language only.
Conformément aux dispositions de la Résolution du Conseil 15/1993, ce document est distribué
en version anglaise seulement.
To expedite distribution, this document is circulated as received from the committee
secretariat. ISO Central Secretariat work of editing and text composition will be undertaken at
publication stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME
STANDARDS TO WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
© International Organization for Standardization, 2010
---------------------- Page: 7 ----------------------
oSIST prEN ISO 13628-8:2011
ISO/DIS 13628-8
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user’s country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic,
photocopying, recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
ii © ISO 2010 – All rights reserved
---------------------- Page: 8 ----------------------
oSIST prEN ISO 13628-8:2011
ISO/WD 13628-8
Contents Page
Foreword .vi
Introduction.viii
1 Scope.1
2 Normative references.1
3 Terms, definitions and abbreviated terms.2
3.1 Terms and definitions .2
3.2 Abbreviated terms.4
4 Subsea intervention concepts .5
4.1 General .5
4.2 Typical ROV Configurations.6
4.3 Intervention vessels .8
4.4 Component and module intervention.8
4.5 Tie-in systems.9
4.5.1 General .9
4.5.2 Flowline tie-in systems .10
4.5.3 Umbilical tie-in systems.10
4.5.4 Flying leads connections.10
4.6 Intervention strategies.10
4.6.1 General .10
4.6.2 System considerations .11
4.6.3 Subsea intervention system development .11
4.7 System interfaces.12
5 Subsea intervention systems design recommendations.13
5.1 Surface equipment .13
5.1.1 General .13
5.1.2 Deck handling systems.14
5.1.3 Deployment equipment.14
5.1.4 Tool and equipment deployment .16
5.2 ROV tools .17
5.2.1 General .17
5.2.2 ROV mounted skids .17
5.3 Module/component replacement tools.17
5.4 Tie-in systems.18
5.4.1 General .18
5.4.2 Pull-in tool .18
5.4.3 Connection function.19
5.4.4 Connector and seal assembly.20
5.4.5 Hubs, caps and termination heads.20
5.4.6 Pull-in porches/alignment structures.22
5.5 Subsea intervention tooling control and actuation .22
5.5.1 General .22
5.5.2 Common recommendations for control systems .22
5.5.3 Self-contained control systems .22
5.5.4 Control systems controlled via ROV control system .25
5.5.5 Mechanical actuation .25
6 ROV interfaces.25
6.1 General .25
6.2 ROV access recommendations.26
6.2.1 ROV dimensions.26
© ISO 2010 – All rights reserved iii
---------------------- Page: 9 ----------------------
oSIST prEN ISO 13628-8:2011
ISO/WD 13628-8
6.2.2 Elevation of ROV interfaces.26
6.3 Stabilisation.26
6.3.1 General.26
6.3.2 Working platforms .26
6.3.3 Grasping .27
6.3.4 Docking.29
6.3.5 Suction cups or feet .34
6.4 Handles for use with manipulators.34
6.4.1 Function.34
6.4.2 Application .34
6.4.3 Design .34
6.4.4 Operation .34
6.5 Rotary (low-torque) interface.37
6.5.1 Function.37
6.5.2 Application .37
6.5.3 Design .37
6.5.4 Operation .39
6.6 Rotary docking.39
6.6.1 Function.39
6.6.2 Application .39
6.6.3 Design .39
6.6.4 Design recommendations.40
6.6.5 Operation .40
6.7 Linear (push) interfaces, Type A & Type C .42
6.7.1 Function.42
6.7.2 Application .42
6.7.3 Design .42
6.7.4 Operation .42
6.8 Linear (push) interface, Type B.44
6.8.1 Function.44
6.8.2 Application .45
6.8.3 Design .45
6.8.4 Operation .46
6.9 Hot stab hydraulic connection, Type A .46
6.9.1 Function.46
6.9.2 Application .46
6.9.3 Design .46
6.9.4 Design recommendations.46
6.9.5 Operations .47
6.9.6 Materials in design.47
6.10 Hot stab hydraulic connection, Type B .48
6.11 Hot stab hydraulic connection, Type C .50
6.12 Rotary fluid coupling.52
6.12.1 Function.52
6.12.2 Application .52
6.12.3 Design .52
6.13 Component change-out interface .53
6.13.1 Function.53
6.13.2 Application .54
6.13.3 Design .54
6.13.4 Operation .54
6.14 Lifting mandrels.59
6.15 Electrical and hydraulic jumper handling .61
6.15.1 Function.61
6.15.2 Application .61
6.15.3 Design .61
7 Materials .66
7.1 General recommendations .66
7.2 Selection criteria.67
iv © ISO 2010 – All rights reserved
---------------------- Page: 10 ----------------------
oSIST prEN ISO 13628-8:2011
ISO/WD 13628-8
8 Subsea marking.67
8.1 General .67
8.2 Colour design .68
8.3 Marking requirements.68
9 Validation and verification.73
9.1 Design validation.73
9.1.1 General .73
9.1.2 Design documentation.73
9.1.3 Access and operability .74
9.1.4 Design reviews .75
9.1.5 Factory acceptance testing (FAT).76
9.2 Design verification .77
9.2.1 General .77
9.2.2 Qualification test (QT) .77
9.2.3 System integration test (SIT).77
9.2.4 Shallow water test (SWT).78
9.2.5 Deep water test (DWT) .78
Bibliography.80
© ISO 2010 – All rights reserved v
---------------------- Page: 11 ----------------------
oSIST prEN ISO 13628-8:2011
ISO/WD 13628-8
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. E
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.