SIST EN 60076-3:2014/A1:2018
(Amendment)Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
Leistungstransformatoren - Teil 3: Isolationspegel, Spannungsprüfungen und äußere Abstände in Luft
Transformateurs de puissance - Partie 3: Niveaux d'isolement, essais diélectriques et distances d'isolement dans l'air
Močnostni transformatorji - 3. del: Izolacijski nivoji, dielektrični preskusi in zunanje zračne razdalje - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60076-3:2014/A1:2018
01-oktober-2018
0RþQRVWQLWUDQVIRUPDWRUMLGHO,]RODFLMVNLQLYRMLGLHOHNWULþQLSUHVNXVLLQ
]XQDQMH]UDþQHUD]GDOMH'RSROQLOR$
Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in
air
Leistungstransformatoren - Teil 3: Isolationspegel, Spannungsprüfungen und äußere
Abstände in Luft
Transformateurs de puissance - Partie 3: Niveaux d'isolement, essais diélectriques et
distances d'isolement dans l'air
Ta slovenski standard je istoveten z: EN 60076-3:2013/A1:2018
ICS:
29.180 Transformatorji. Dušilke Transformers. Reactors
SIST EN 60076-3:2014/A1:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60076-3:2014/A1:2018
---------------------- Page: 2 ----------------------
SIST EN 60076-3:2014/A1:2018
EUROPEAN STANDARD EN 60076-3:2013/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2018
ICS 29.180
English Version
Power transformers - Part 3: Insulation levels, dielectric tests
and external clearances in air
(IEC 60076-3:2013/A1:2018)
Transformateurs de puissance - Partie 3: Niveaux Leistungstransformatoren - Teil 3: Isolationspegel,
d'isolement, essais diélectriques et distances d'isolement Spannungsprüfungen und äußere Abstände in Luft
dans l'air (IEC 60076-3:2013/A1:2018)
(IEC 60076-3:2013/A1:2018)
This amendment A1 modifies the European Standard EN 60076-3:2013; it was approved by CENELEC on 2018-04-26. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60076-3:2013/A1:2018 E
---------------------- Page: 3 ----------------------
SIST EN 60076-3:2014/A1:2018
EN 60076-3:2013/A1:2018 (E)
European foreword
The text of document 14/947/FDIS, future edition 3 of IEC 60076-3:2013/A1, prepared by IEC/TC 14
"Power transformers" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC
as EN 60076-3:2013/A1:2018.
The following dates are fixed:
(dop) 2019-01-26
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2021-04-26
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identif
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.