oSIST prEN ISO 14919:2023

Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO/DIS 14919:2023)

ISO 14919:2015 specifies requirements for classification of metal and non-metal wires (solid and cored), rods, cords processed by means of thermal spraying, especially by arc and flame spraying.

Thermisches Spritzen - Drähte, Stäbe und Schnüre zum Flammspritzen und Lichtbogenspritzen - Einteilung - Technische Lieferbedingungen (ISO/DIS 14919:2023)

Projection thermique - Fils, baguettes et cordons pour projection thermique à l'arc et au pistolet dans une flamme - Classification - Conditions techniques d'approvisionnement (ISO/DIS 14919:2023)

L'ISO 14919:2015 spécifie les exigences en matière de classification des fils métalliques et non métalliques (pleins et fourrés), des baguettes, des cordons traités par projection thermique, notamment les procédés à l'arc et dans la flamme.

Vroče brizganje - Žice, palice in vrvi za plamensko in obločno brizganje - Klasifikacija - Tehnični dobavni pogoji (ISO/DIS 14919:2023)

General Information

• Status: Not Published
• Public Enquiry End Date: 09-Apr-2023
• ICS: 25.220.20 - Surface treatment
• Technical Committee: IPKZ - Protection of metals against corrosion
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 24-Jan-2023
• Due Date: 13-Jun-2023
• Ref Project: prEN ISO 14919 - Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO/DIS 14919:2023)

Relations

• Revises: SIST EN ISO 14919:2015 - Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO 14919:2015)
• Effective Date: 19-Jan-2023
• Revised: SIST EN ISO 14919:2015 - Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO 14919:2015)
• Effective Date: 18-Jan-2023
• Replaces: SIST EN ISO 14919:2015 - Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO 14919:2015)
• Effective Date: 22-Dec-2021

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 14919:2023
01-marec-2023
Nadomešča:
SIST EN ISO 14919:2015
Vroče brizganje - Žice, palice in vrvi za plamensko in obločno brizganje -
Klasifikacija - Tehnični dobavni pogoji (ISO/DIS 14919:2023)

Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification -

Technical supply conditions (ISO/DIS 14919:2023)
Thermisches Spritzen - Drähte, Stäbe und Schnüre zum Flammspritzen und

Lichtbogenspritzen - Einteilung - Technische Lieferbedingungen (ISO/DIS 14919:2023)

Projection thermique - Fils, baguettes et cordons pour projection thermique à l'arc et au

pistolet dans une flamme - Classification - Conditions techniques d'approvisionnement

(ISO/DIS 14919:2023)
Ta slovenski standard je istoveten z: prEN ISO 14919
ICS:
25.220.20 Površinska obdelava Surface treatment
oSIST prEN ISO 14919:2023 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 14919:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 14919:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 14919
ISO/TC 107 Secretariat: KATS
Voting begins on: Voting terminates on:
2023-01-17 2023-04-11
Thermal spraying — Wires, rods and cords for flame
and arc spraying — Classification — Technical supply
conditions

Projection thermique — Fils, baguettes et cordons pour projection thermique à l'arc et au pistolet dans une

flamme — Classification — Conditions techniques d'approvisionnement
ICS: 25.220.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 14919:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 14919:2023
ISO/DIS 14919:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 14919
ISO/TC 107 Secretariat: KATS
Voting begins on: Voting terminates on:
Thermal spraying — Wires, rods and cords for flame
and arc spraying — Classification — Technical supply
conditions

Projection thermique — Fils, baguettes et cordons pour projection thermique à l'arc et au pistolet dans une

flamme — Classification — Conditions techniques d'approvisionnement
ICS: 25.220.20
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

NOT BE REFERRED TO AS AN INTERNATIONAL

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.

the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below

IN ADDITION TO THEIR EVALUATION AS

or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,

TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 14919:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
© ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 4 ----------------------
oSIST prEN ISO 14919:2023
ISO/DIS 14919:2022(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction .................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ..................................................................................................................................................................................... 1

3 Classification ............................................................................................................................................................................................................ 1

3.1 Classification according to the manufacturing process and resulting structure ....................... 1

3.2 Classification according to material groups and chemical composition ............................................ 1

3.2.1 Tin and tin alloys ................................................................................................................................................................ 2

3.2.2 Zinc and zinc alloys .......................................................................................................................................................... 2

3.2.3 Aluminium and aluminium alloys....................................................................................................................... 4

3.2.4 Copper and copper alloys ........................................................................................................................................... 5

3.2.5 Iron and iron alloys .......................................................................................................................................................... 6

3.2.6 Nickel and nickel alloys ................................................................................................................................................ 8

3.2.7 Molybdenum ........................................................................................................................................... ................................ 9

3.2.8 Ceramics .................................................................................................................................................................................... 9

4 Sizes and tolerances ......................................................................................................................................................................................10

5 Properties ................................................................................................................................................................................................................11

5.1 Mechanical properties .................................................................................................................................................................. 11

5.2 Surface properties ............................................................................................................................................................................ 11

5.3 Workability: Winding of wires ..............................................................................................................................................12

6 Designation .............................................................................................................................................................................................................12

7 Technical supply conditions .................................................................................................................................................................12

7.1 Forms of delivery ...............................................................................................................................................................................12

7.2 Identification .........................................................................................................................................................................................13

7.3 Packaging and storage .................................................................................................................................................................. 14

8 Inspection documents .................................................................................................................................................................................14

iii
© ISO 2022 – All rights reserved
---------------------- Page: 5 ----------------------
oSIST prEN ISO 14919:2023
ISO/DIS 14919:2022(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www.iso.org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation on the meaning of ISO specific terms and expressions related to conformity

assessment, as well as information about ISO's adherence to the WTO principles in the Technical

Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information

ISO 14919 was prepared by the European Committee for Standardization (CEN) Technical Committee

CEN/TC 240, Thermal spraying and thermally sprayed coatings, in collaboration with ISO Technical

Committee ISO/TC 107, Metallic and other inorganic coatings, in accordance with the agreement on

technical cooperation between ISO and CEN (Vienna Agreement).

This third edition cancels and replaces the second edition (ISO 14919:2015), which has been technically

revised.
© ISO 2022 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 14919:2023
ISO/DIS 14919:2022(E)
Introduction

Requests for official interpretations of any aspect of this standard should be directed to the secretariat

of ISO/TC 107/WG 1 via your national standards body; a complete listing can be found at www.iso.org.

© ISO 2022 – All rights reserved
---------------------- Page: 7 ----------------------
oSIST prEN ISO 14919:2023
---------------------- Page: 8 ----------------------
oSIST prEN ISO 14919:2023
DRAFT INTERNATIONAL STANDARD ISO/DIS 14919:2022(E)
Thermal spraying — Wires, rods and cords for flame
and arc spraying — Classification — Technical supply
conditions
1 Scope

This International Standard specifies requirements for classification of metal and non-metal wires

(solid and cored), rods, cords processed by means of thermal spraying, especially by arc and flame

spraying.
2 Normative references

The following documents, in whole or in part, are normatively referenced in this document and are

indispensable for its application. For dated references, only the edition cited applies. For undated

references, the latest edition of the referenced document (including any amendments) applies.

ISO 10474:2013, Steel and steel products — Inspection documents

ISO 544:2011, Welding consumables — Technical delivery conditions for filler materials and fluxes — Type

of product, dimensions, tolerances and markings
3 Classification

3.1 Classification according to the manufacturing process and resulting structure

The thermal spray materials are classified according to the manufacturing process and the resulting

structure, as given in Table 1.
Table 1 — Classification of thermal spraying material and resulting structure
Number Term Manufacturing process Structure
1 solid wire/rod metallurgical manufacturing and forming homogeneous com-
position
2 solid wire/rod powder metallurgical manufacturing and forming homogeneous com-
position

3 cored wire filling up a metal tube and compressed by means of forming seamless metal

(tube shaped shell with powder
wire) filling

4 cored wire forming a metal sheet with powder filling, binder and com- metal shell with

(folded wire) pressed by means of drawing powder filling

5 cords simultaneous extruding of powder, binder and organic sheath plastic shell with

powder filling

6 oxide ceramic extruding and sintering respectively drying of ceramic mate- porous rod con-

rods rial sisting of bonded
ceramic particles
3.2 Classification according to material groups and chemical composition

The material groups are given in Table 2, and the chemical composition shall comply with Tables 3 to 10.

© ISO 2022 – All rights reserved
---------------------- Page: 9 ----------------------
oSIST prEN ISO 14919:2023
ISO/DIS 14919:2022(E)
Table 2 — Classification according to material groups
Code Number Term
1 tin and tin alloys
2 zinc and zinc alloys
3 aluminium and aluminium alloys
4 copper and copper alloys
5 iron and iron alloys
6 nickel and nickel alloys
7 molybdenum
8 oxide ceramics
3.2.1 Tin and tin alloys
Table 3 — Tin and tin alloys
Code Alloying elements mass frac- Other elements mass fraction Manufacturing
Symbol
number tion in % in % process
1.1 Sn99 Sn ≥ 99,95 total ≤ 0,05
Sb ≤ 0,02
Ag ≤ 0,01
Bi ≤ 0,002
Cu ≤ 0,01
Fe ≤ 0,01
Pb ≤ 0,02
Al+Cd+Zn ≤ 0,002
1.2 SnSbCu84 Sb 7 to 8 Pb ≤ 0,35
Cu 3 to 4
As ≤ 0,1
remainder Sn
Bi ≤ 0,08
Fe ≤ 0,1
Al ≤ 0,01
Zn ≤ 0,01
other:
≤ 0,2
total
3.2.2 Zinc and zinc alloys
Table 4 — Zinc and zinc alloys
Alloying elements mass frac- Other elements mass fraction Manufacturing
Code number Symbol
tion in % in % process
total ≤ 0,010
Pb ≤ 0,007
Cd ≤ 0,004
2.1 Zn99,99 Zn ≥ 99,99 Pb+Cd ≤ 0,011 1
Sn ≤ 0,001
Fe ≤ 0,005
Cu ≤ 0,002
© ISO 2022 – All rights reserved
---------------------- Page: 10 ----------------------
oSIST prEN ISO 14919:2023
ISO/DIS 14919:2022(E)
TTabablele 4 4 ((ccoonnttiinnueuedd))
Alloying elements mass frac- Other elements mass fraction Manufacturing
Code number Symbol
tion in % in % process
other:
≤ 0,12
total
total ≤ 1,0
Pb ≤ 0,05
Cd ≤ 0,005
Pb+Cd ≤ 0,06
Sn ≤ 0,001
2.2 Zn99 Zn ≥ 99 Fe ≤ 0,01 1
Cu ≤ 0,7
Mo ≤ 0,01
Ti ≤ 0,16
Mg ≤ 0,01
Al ≤ 0,01
other:
≤ 0,12
total
Zn 84 to 86 total ≤ 0,17
Al 14 to 16 Pb ≤ 0,007
Cd ≤ 0,004
Pb+Cd ≤ 0,011
2.3 ZnAl15 1
Sn ≤ 0,001
Fe ≤ 0,02
Cu ≤ 0,01
Si ≤ 0,12
97,5 to
Zn total ≤ 0,17
98,5
Al 1,5 to 2,5 Pb ≤ 0,007
Cd ≤ 0,004
...