iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60068-3-2:2002

(Main)

Environmental testing -- Part 3: Background information -- Section 2: Combined temperature/low air pressure tests

Environmental testing -- Part 3: Background information -- Section 2: Combined temperature/low air pressure tests

Gives background information for Test Z/AM: Combined cold/low air pressure tests (HD 323.2.40), and Test Z/BM: Combined dry heat/low air pressure tests (IEC 60068-2-41)

Umweltprüfungen -- Teil 3: Leitfaden -- Hauptabschnitt 2: Kombinierte Prüfungen Temperatur/niedriger Luftdruck

Essais d'environnement -- Partie 3: Informations de base -- Section 2: Essais combinés température/basse pression atmosphérique

Comporte les informations de base relatives à l'essai Z/AM: Essais combinés froid/basse pression atmosphérique pour spécimens dissipant et ne dissipant pas d'énergie, de la HD 323.2.40, et relatives à l'essai Z/BM: Essais combinés chaleur sèche/basse pression atmosphérique pour spécimens dissipant ou ne dissipant pas d'énergie, de la CEI 60068-2-41

Environmental testing - Part 3: Background information - Section 2: Combined temperature/low air pressure tests

General Information

Status
Withdrawn
Publication Date
30-Apr-2002
Withdrawal Date
21-Sep-2021
ICS
19.040 - Environmental testing
Technical Committee
I09 - Imaginarni 09
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
22-Sep-2021
Due Date
15-Oct-2021
Completion Date
22-Sep-2021
Ref Project
EN 60068-3-2:1999 - Environmental testing - Part 3: Background information - Section 2: Combined temperature/low air pressure tests

Relations

Replaced By
SIST EN 60068-2-39:2016 - Environmental testing - Part 2-39: Tests and Guidance: Combined temperature or temperature and humidity with low air pressure tests
Effective Date
24-Jan-2017
Replaced By
SIST EN 60068-2-39:2016 - Environmental testing - Part 2-39: Tests and Guidance: Combined temperature or temperature and humidity with low air pressure tests
Effective Date
28-Jan-2023

Buy Standard

EN 60068-3-2:2002EN 60068-3-2:2002
PreviousNext
Standard
EN 60068-3-2:2002
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Environmental testing - Part 3: Background information - Section 2: Combined temperature/low air pressure testsUmweltprüfungen -- Teil 3: Leitfaden -- Hauptabschnitt 2: Kombinierte Prüfungen Temperatur/niedriger LuftdruckEssais d'environnement -- Partie 3: Informations de base -- Section 2: Essais combinés température/basse pression atmosphériqueEnvironmental testing -- Part 3: Background information -- Section 2: Combined
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60721-2-6:2023(Main)
Classification of environmental conditions. Part 2-6: Environmental conditions appearing in nature - Earthquake vibration and shock (IEC 60721-2-6:2022)
EN IEC 60721-2-6:2023

This part of IEC 60721 deals with environmental conditions appearing in nature related to earthquake vibrations and shocks.
Its object is to define some fundamental properties and quantities for characterization of earthquakes as background material for the severities to which products are liable to be exposed during storage and use. Accelerations given are for ground surface conditions only.
Conditions related to structures are referred to but restricted to general case descriptions.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60721-3-2:2018/AC:2022(Corrigendum)
Classification of environmental conditions - Part 3-2: Classification of groups of environmental parameters and their severities - Transportation and handling (IEC 60721-3-2:2018/COR2:2022)
EN IEC 60721-3-2:2018/AC:2022-07

IEC Corrected version

  • Corrigendum
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60068-3-3:2019/AC:2021(Corrigendum)
Environmental testing - Part 3-3: Supporting documentation and guidance - Seismic test methods for equipment (IEC 60068-3-3:2019/COR1:2021)
EN IEC 60068-3-3:2019/AC:2021-10

20211015 - IEC Corrected version.

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60068-2-38:2021(Main)
Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test (IEC 60068-2-38:2021)
EN IEC 60068-2-38:2021

This part of IEC 60068 specifies a composite test procedure, primarily intended for component
type specimens, to determine, in an accelerated manner, the resistance of specimens to the
deteriorative effects of high temperature/humidity and cold conditions.
This test standard does not apply to specimens that are energized during the complete test.
Specimens can be energized during the constant phases of the tests. Measurements on
energized specimens are typically carried out during constant phases of the test unless
specified otherwise.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60068-2-13:2021(Main)
Environmental testing - Part 2-13: Tests - Test M: Low air pressure (IEC 60068-2-13:2021)
EN IEC 60068-2-13:2021

This part of IEC 60068 specifies methods of test applicable to specimens which, during
transportation, storage or in service, can be subjected to low air pressure.
The object of the low air pressure test is to determine the ability of components, equipment or
other articles to be used, transported or stored at low air pressure.
Components, equipment or other articles to be used, transported or stored under a
simultaneous combination of high or low temperature and low air pressure, where the
combination is important for the stresses imposed on the articles or for the failure mechanisms,
are then tested in accordance with IEC 60068-2-39.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60068-2-11:2021(Main)
Environmental testing - Part 2-11: Tests - Test Ka: Salt mist (IEC 60068-2-11:2021)
EN IEC 60068-2-11:2021

This part of IEC 60068 specifies a test method for assessing the corrosion resistance of
electrotechnical products components, equipment and materials in a salt mist environment. Its
objective is to verify that the comparative quality of a metallic material, with or without
corrosion protection, is maintained when exposed to salt mist.
This test method is useful for evaluating the quality and the uniformity of coatings applied to
protect metals against corrosion. It is particularly useful for detecting discontinuities, such as
pores and other defects, in certain metallic, organic, anodic oxide and conversion coatings.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60068-3-7:2020(Main)
Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load) (IEC 60068-3-7:2020)
EN IEC 60068-3-7:2020

This part of IEC 60068 specifies a uniform and reproducible method of confirming that
temperature test chambers conform to the requirements specified in the climatic test procedures
of IEC 60068-2-1 and IEC 60068-2-2, when loaded with either heat-dissipating or non heatdissipating
specimens under conditions which take into account air circulation inside the
working space of the chamber. This document is intended primarily for users when conducting
regular chamber performance monitoring.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60721-3-0:2020(Main)
Classification of environmental conditions - Part 3-0: Classification of groups of environmental parameters and their severities - Introduction (IEC 60721-3-0:2020)
EN IEC 60721-3-0:2020

This part of IEC 60721 provides guidance on the use of all parts of IEC 60721-3. It contains
background information including information on the application and limitation of the classes
given in various parts of IEC 60721-3 which can be used in the design, limitation of conditions
and protection of equipment.
Reference to IEC 60721-3-0 is important in order to avoid misuse of the classes defined in the
other parts of IEC 60721-3.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60068-2-64:2008/A1:2020(Amendment)
Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random (digital contol) and guidance (IEC 60068-2-64:2008/A1:2019)
EN 60068-2-64:2008/A1:2019
  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60068-3-3:2019(Main)
Environmental testing - Part 3-3: Supporting documentation and guidance - Seismic test methods for equipment (IEC 60068-3-3:2019)
EN IEC 60068-3-3:2019

This document applies primarily to electro-technical equipment but its application can be extended to other equipment and to components. In addition, if some type of analysis is always performed when making a seismic qualification, for example for the choice of the representative sample to be tested or for the extension of the seismic qualification from the tested specimen to similar specimens, the verification of the performance of an equipment by analysis or by a combination of testing and analysis can be acceptable but is outside the scope of this document, which is restricted to verification based entirely upon data from dynamic testing. This document deals solely with the seismic testing of a full-size equipment which can be tested on a vibration table. The seismic testing of an equipment is intended to demonstrate its ability to perform its required function during and/or after the time it is subjected to the stresses and displacements resulting from an earthquake. The object of this document is to present a range of methods of testing which, when specified by the relevant specification, can be applied to demonstrate the performance of equipment for which seismic testing is required with the main aim of achieving qualification.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day