iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST HD 384.4.42 S1:2000/A1:2000

(Amendment)

Electrical installations of buildings -- Part 4: Protection for safety -- Chapter 42: Protection against thermal effects

Electrical installations of buildings -- Part 4: Protection for safety -- Chapter 42: Protection against thermal effects

Superseded by HD 60364-4-42:2011

Elektrische Anlagen von Gebäuden -- Teil 4: Schutzmaßnahmen -- Kapitel 42: Schutz gegen thermische Einflüsse

Installations électriques des bâtiments -- Partie 4: Protection pour assurer la sécurité -- Chapitre 42: Protection contre les effets thermiques

Električne inštalacije zgradb –4. del: Zaščitni ukrepi – 42. poglavje: Zaščita pred toplotnimi učinki – Dopolnilo A1

General Information

Status
Withdrawn
Publication Date
31-Jan-2000
Withdrawal Date
13-Jan-2014
ICS
29.120.50 - Fuses and other overcurrent protection devices
91.140.50 - Electricity supply systems
Technical Committee
ELI - Electrical and communication installations
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
13-Jan-2014
Due Date
05-Feb-2014
Completion Date
14-Jan-2014
Directive
TRRTP131 - Tehnična smernica TSG-N-002:2009 - Nizkonapetostne električne inštalacije
Ref Project
HD 384.4.42 S1:1985/A1:1992 - Electrical installations of buildings - Part 4: Protection for safety - Chapter 42: Protection against thermal effects

Relations

Amends
SIST HD 384.4.42 S1:2000 - Electrical installations of buildings -- Part 4: Protection for safety -- Chapter 42: Protection against thermal effects
Effective Date
01-Feb-2000
Replaced By
SIST HD 60364-4-42:2011 - Low voltage electrical installations - Part 4-42: Protection for safety - Protection against thermal effects
Effective Date
28-Jan-2023
Amends
SIST HD 384.4.42 S1:2000 - Electrical installations of buildings -- Part 4: Protection for safety -- Chapter 42: Protection against thermal effects
Effective Date
28-Jan-2023
Amends
SIST HD 384.4.42 S1:2000 - Electrical installations of buildings -- Part 4: Protection for safety -- Chapter 42: Protection against thermal effects
Effective Date
07-Jun-2022

Buy Standard

HD 384.4.42 S1:2000/A1:2000HD 384.4.42 S1:2000/A1:2000
PreviousNext
Amendment
HD 384.4.42 S1:2000/A1:2000
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST HD 384.4.42 S1:2000/A1:2000
01-februar-2000
(OHNWULþQHLQãWDODFLMH]JUDGE±GHO=DãþLWQLXNUHSL±SRJODYMH=DãþLWDSUHG
WRSORWQLPLXþLQNL±'RSROQLOR$
Electrical installations of buildings -- Part 4: Protection for safety -- Chapter 42:
Protection against thermal effects
Elektrische Anlagen von Gebäuden -- Teil 4: Schutzmaßnahmen -- Kapitel 42: Schutz
gegen thermische Einflüsse
Installations électriques des bâtiments -- Partie 4: Protection pour assurer la sécurité --
Chapitre 42: Protection contre les effets thermiques
Ta slovenski standard je istoveten z: HD 384.4.42 S1:1985/A1:1992
ICS:
29.120.50 9DURYDONHLQGUXJD Fuses and other overc
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST HD 60364-5-53:2022/AC:2022(Corrigendum)
Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Switchgear and controlgear
HD 60364-5-53:2022/AC:2022-08

CCMC - Correction of ToC, clause numbering
TC - Correction of Figure 534.1

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 60364-5-53:2022(Main)
Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Switchgear and controlgear
HD 60364-5-53:2022

This part of HD 60364 deals with general requirements for isolation, switching, control and monitoring and with
the requirements for selection and erection of the devices provided to fulfil such functions.

  • Standardization document
    94 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 60364-4-42:2011/A11:2022(Amendment)
Low voltage electrical installations - Part 4-42: Protection for safety - Protection against thermal effects
HD 60364-4-42:2011/A11:2021

NEXT ACTION: TC action by 2021-11-01
2021-06-24 MDC: Document on hold awaiting BT approval of A-deviations
2019-10-01: upcoming CLC/TC 64 request to CLC/BT to proceed with a second formal vote.

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 60364-4-46:2017/A11:2017(Amendment)
Low-voltage electrical installations - Part 4-46: Protection for safety - Isolation and switching
HD 60364-4-46:2016/A11:2017

2021: CLC legacy converted by DCLab NISOSTS

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 60364-4-46:2017(Main)
Low-voltage electrical installations - Part 4-46: Protection for safety - Isolation and switching
HD 60364-4-46:2016

This Harmonization Document deals with
– non-automatic local and remote isolation and switching measures which prevent or remove
dangers associated with electrical installations or electrically powered equipment; and
– switching for the control of circuits or equipment.

  • Standardization document
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 60364-4-42:2011/A1:2015(Amendment)
Low voltage electrical installations - Part 4-42: Protection for safety - Protection against thermal effects
HD 60364-4-42:2011/A1:2015
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 60364-4-43:2011(Main)
Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
HD 60364-4-43:2010

This part of HD 60364 provides requirements for the protection of live conductors from the effects of overcurrents.
This standard describes how live conductors are protected by one or more devices for the automatic
disconnection of the supply in the event of overload (Clause 433) and short-circuit (Clause 434) except in cases where the overcurrent is limited in accordance with Clause 436 or where the conditions described in 433.3 (omission of devices for protection against overload) or 434.3 (omission of devices for protection against short-circuit) are met. Coordination of overload protection and short-circuit protection is also covered (Clause 435).
NOTE 1 Live conductors protected against overload in accordance with Clause 433 are considered to be protected also against faults likely to cause overcurrents of a magnitude similar to overload currents.
NOTE 2 The requirements of this standard do not take account of external influences.
NOTE 3 Protection of conductors according to this standard does not necessarily protect the equipment connected to the conductors.
NOTE 4 Flexible cables connecting equipment by plugs and socket-outlet to fixed installations are not part of the scope of this standard and for this reason are not necessarily protected against overcurrent.
NOTE 5 Disconnection does not mean isolation in this standard.

  • Standardization document
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standardization document
    27 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 60364-4-42:2011(Main)
Low voltage electrical installations - Part 4-42: Protection for safety - Protection against thermal effects
HD 60364-4-42:2011

Nizkonapetostne električne inštalacije - 4-42. del: Zaščitni ukrepi - Zaščita pred toplotnimi učinki (IEC 60364-4-42:2010, spremenjen)
Low voltage electrical installations - Part 4-42: Protection for safety - Protection against thermal effects
Osnova:   HD 60364-4-42:2011
ICS:   29.120.50, 91.140.50
This part of IEC 60364 applies to electrical installations with regard to measures for the protection of persons, livestock and property against
– thermal effects, combustion or degradation of materials, and risk of burns caused by electrical equipment,
– flames in case of a fire hazard being propagated from electrical installations to other fire compartments segregated by barriers which are in the vicinity, and
– the impairment of the safe functioning of electrical equipment including safety services.
NOTE 1 For protection against thermal effects, national statutory requirements may be applicable.
NOTE 2 Protection against overcurrent is dealt with in IEC 60364-4-43.

  • Standardization document
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standardization document
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60364-4-43:2009
Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
IEC 60364-4-43

IEC 60364-4-43:2008 provides requirements for the protection of live conductors from the effects of overcurrents. IEC 60364-4-43:2008 describes how live conductors are protected by one or more devices for the automatic disconnection of the supply in the event of overload (Clause 433) and short-circuit (Clause 434) except in cases where the overcurrent is limited in accordance with Clause 436 or where the conditions described in 433.3 (omission of devices for protection against overload) or 434.3 (omission of devices for protection against short-circuit) are met. Coordination of overload protection and short-circuit protection is also covered (Clause 435). This third edition cancels and replaces the second edition, published in 2001, and constitutes a technical revision. The main changes with respect to the previous edition are:
- Introduction of new informative Annexes B, C and D.
- Information concerning flexible cables added to Scope.
  - Requirements added for overload detection for the neutral conductor for harmonic currents.
- Requirement that devices for protection against short-circuit current be capable of making as well as breaking short-circuit current added.
- Information added to clarify protection against overload current.
- Requirements where devices for protection against overload need not be provided expanded.
- Requirements where devices for protection against short-circuit need not be provided expanded.
- Requirements for short-circuit current ratings of busbar trunking systems added.[
]The contents of the corrigendum of October 2008 have been included in this copy.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    29 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60364-4-44:2009(Main)
Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances
IEC 60364-4-44

The rules of this Part of IEC 60364 are intended to provide requirements for the safety of electrical installations in the event of voltage disturbances and electromagnetic disturbances generated for different specified reasons. The rules of this part are not intended to apply to systems for distribution of energy to the public, or power generation and transmission for such systems (see the scope of IEC 60364-1) although such disturbances may be conducted into or between electrical installations via these supply systems.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    56 pages
    French language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day