Optical fibre cables -- Part 3-30: Outdoor cables - Family specification for optical telecommunication cables for lake and river crossings

Deals with optical telecommunication cables installed underwater for lake and river crossings. Does not cover methods of cable repair or repair capability, nor does it cover cables for use with lake and river crossing line amplifiers.

Lichtwellenleiterkabel -- Teil 3-30: Außenkabel - Familienspezifikation für LWL-Fernmeldekabel für die Durchquerung von Seen und Flüssen

Câbles à fibres optiques -- Partie 3-30: Câbles extérieurs - Spécification de famille pour les câbles optiques de telécommunication utilisés pour les traversées de lacs et de rivières

S'applique aux câbles optiques de télécommunication destinés à être utilisés pour les traversées des lacs et des rivières. Ne couvre ni les méthodes de réparation des câbles ni leur réparabilité, ni les câbles équipés d'amplificateurs pour utilisation pour la traversée des lacs et des rivières.

Kabli iz optičnih vlaken – 3-30. del: Zunanji kabli - Rodovna specifikacija optičnih telekomunikacijskih kablov za prečkanje jezer in rek (IEC 60794-3-30:2002)*

General Information

Status
Withdrawn
Publication Date
31-Aug-2004
Withdrawal Date
18-Nov-2008
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
18-Nov-2008
Due Date
11-Dec-2008
Completion Date
19-Nov-2008

Relations

Buy Standard

Standard
EN 60794-3-30:2004
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lichtwellenleiterkabel -- Teil 3-30: Außenkabel - Familienspezifikation für LWL-Fernmeldekabel für die Durchquerung von Seen und FlüssenCâbles à fibres optiques -- Partie 3-30: Câbles extérieurs - Spécification de famille pour les câbles optiques de telécommunication utilisés pour les traversées de lacs et de rivièresOptical fibre cables -- Part 3-30: Outdoor cables - Family specification for optical telecommunication cables for lake and river crossings33.180.10Fibres and cablesICS:Ta slovenski standard je istoveten z:EN 60794-3-30:2003SIST EN 60794-3-30:2004en01-september-2004SIST EN 60794-3-30:2004SLOVENSKI
STANDARD



SIST EN 60794-3-30:2004



EUROPEAN STANDARD
EN 60794-3-30 NORME EUROPÉENNE EUROPÄISCHE NORM
January 2003 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60794-3-30:2003 E
ICS 33.180.10 Supersedes EN 187104:2001
English version
Optical fibre cables Part 3-30: Outdoor cables -
Family specification for optical telecommunication cables
for lake and river crossings (IEC 60794-3-30:2002)
Câbles à fibres optiques Partie 3-30: Câbles extérieurs - Spécification de famille pour les câbles optiques de telécommunication utilisés pour les traversées de lacs et de rivières (CEI 60794-3-30:2002)
Lichtwellenleiterkabel Teil 3-30: Außenkabel - Familienspezifikation für LWL-Fernmeldekabel für die Durchquerung
von Seen und Flüssen (IEC 60794-3-30:2002)
This European Standard was approved by CENELEC on 2002-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
SIST EN 60794-3-30:2004



EN 60794-3-30:2003 - 2 - Foreword
The text of document 86A/820/FDIS, future edition 1 of IEC 60794-3-30, prepared by SC 86A, Fibres and cables, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60794-3-30 on 2002-12-01.
This European Standard supersedes EN 187104:2001.
This standard shall be used in conjunction with EN 60794-1-1:2002, EN 60794-1-2:1999 and EN 60794-3:2002.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop) 2003-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2005-12-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. __________
Endorsement notice
The text of the International Standard IEC 60794-3-30:2002 was approved by CENELEC as a European Standard without any modification. __________
SIST EN 60794-3-30:2004



- 3 - EN 60794-3-30:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60793-1-20 2001 Optical fibres Part 1-20: Measurement methods and test procedures - Fibre geometry EN 60793-1-20 2002
SIST EN 60794-3-30:2004



SIST EN 60794-3-30:2004



NORMEINTERNATIONALECEIIECINTERNATIONALSTANDARD60794-3-30Première éditionFirst edition2002-12Câbles à fibres optiques –Partie 3-30:Câbles extérieurs –Spécification de famille pour les câbles optiquesde télécommunication utilisés pour les traverséesde lacs et de rivièresOptical fibre cables –Part 3-30:Outdoor cables –Family specification for optical telecommunicationcables for lake and river crossingsPour prix, voir catalogue en vigueurFor price, see current catalogue IEC 2002
Droits de reproduction réservés

Copyright - all rights reservedAucune partie de cette publication ne peut être reproduite niutilisée sous quelque forme que ce soit et par aucun procédé,électronique ou mécanique, y compris la photocopie et lesmicrofilms, sans l'accord écrit de l'éditeur.No part of this publication may be reproduced or utilized in anyform or by any means, electronic or mechanical, includingphotocopying and microfilm, without permission in writing fromthe publisher.International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11
Telefax: +41 22 919 03 00
E-mail: inmail@iec.ch
Web: www.iec.chCODE PRIXPRICE CODEQCommission Electrotechnique InternationaleInternational Electrotechnical Commission
SIST EN 60794-3-30:2004



60794-3-30  IEC:2002– 3 –CONTENTSFOREWORD.51Scope.92Normative references.93Symbols and abbreviations.94Family specification for optical telecommunication cables to be used in lake- andriver-crossing application (blank detail specification and minimum requirements).134.1Cable description.134.2Optical fibres.174.2.1Single-mode dispersion unshifted (B1.1) optical fibre.174.2.2Single-mode dispersion shifted (B2) optical fibre.174.2.3Single-mode non zero dispersion shifted (B4) optical fibre.194.3Cable element.194.4Cable construction.214.5Installation and operating conditions.234.6Mechanical and environmental tests.254.6.1Tests applicable.254.6.2Details on family requirements and test conditions for optical fibrecable tests.27SIST EN 60794-3-30:2004



60794-3-30  IEC:2002– 5 –INTERNATIONAL ELECTROTECHNICAL COMMISSION___________OPTICAL FIBRE CABLES –Part 3-30: Outdoor cables –Family specification for optical telecommunicationcables for lake and river crossingsFOREWORD1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of the IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields. Tothis end and in addition to other activities, the IEC publishes International Standards. Their preparation isentrusted to technical committees; any IEC National Committee interested in the subject dealt with mayparticipate in this preparatory work. International, governmental and non-governmental organizations liaisingwith the IEC also participate in this preparation. The IEC collaborates closely with the InternationalOrganization for Standardization (ISO) in accordance with conditions determined by agreement between thetwo organizations.2)The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, aninternational consensus of opinion on the relevant subjects since each technical committee has representationfrom all interested National Committees.3)The documents produced have the form of recommendations for international use and are published in the formof standards, technical specifications, technical reports or guides and they are accepted by the NationalCommittees in that sense.4)
In order to promote international unification, IEC National Committees undertake to apply IEC InternationalStandards transparently to the maximum extent possible in their national and regional standards. Anydivergence between the IEC Standard and the corresponding national or regional standard shall be clearlyindicated in the latter.5)
The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for anyequipment declared to be in conformity with one of its standards.6)
Attention is drawn to the possibility that some of the elements of this International Standard may be the subjectof patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.International Standard IEC 60794-3-30 has been prepared by subcommittee 86A: Fibres andcables, of IEC technical committee 86: Fibre optics.This standard shall be used in conjunction with IEC 60794-1-1 and IEC 60794-1-2, andIEC 60794-3.The text of this standard is based on the following documents:FDISReport on voting86A/820/FDIS86A/832/RVDFull information on the voting for the approval of this standard can be found in the report onvoting indicated in the above table.This publication has been in accordance with ISO/IEC Directives, Part 3.SIST EN 60794-3-30:2004



60794-3-30  IEC:2002– 7 –IEC 60794 consists of the following parts, under the general title Optical fibre cables:•Part 1: Generic specification–Part 1-1: General–Part 1-2: Basic optical cable test procedures•Part 2: Indoor optical fibre cables – Sectional specification•Part 3: Outdoor optical fibre cables – Sectional specification•Part 4: Aerial optical cables for high-voltage power lines – Sectional specification 1)The committee has decided that the contents of this publication will remain unchanged untilApril 2005. At this date, the publication will be• reconfirmed;• withdrawn;• replaced by a revised edition, or• amended.________1)
Under consideration.SIST EN 60794-3-30:2004



60794-3-30  IEC:2002– 9 –OPTICAL FIBRE CABLES –Part 3-30: Outdoor cables –Family specification for optical telecommunicationcables for lake and river crossings1 ScopeThis part of IEC 60794 is a family specification that covers optical telecommunication cablesto be used as underwater cables for lake and river crossings. Requirements of the sectionalspecification IEC 60794-3 for duct, buried, aerial and lake- and river-crossing cables areapplicable to cables covered by this standard.
This standard does not cover methods of cablerepair nor repair capability, nor does it cover cables for use with lake- and river-crossing lineamplifiers.Clause 5 of this standard describes a blank detail specification for optical telecommunicationcables to be used for lake and river crossings. It incorporates some minimum requirements.Detail specifications may be prepared on the basis of this family specification.The parameters specified in this standard may be affected by measurement uncertaintyarising either from measurement errors or calibration errors due to lack of suitable standards.Acceptance criteria are interpreted with respect to this consideration (see IEC 60794-3,clause 9).The number of fibres tested is representative of the cable design and should be agreedbetween the user and the manufacturer.2 Normative referencesThe following referenced documents are indispensable for the application of this document.For dated references, only the edition cited applies. For undated references, the latest editionof the referenced document (including any amendments) applies.They complete the normative references already listed in the generic specification(IEC 60794-1-1, clause 2, and IEC 60794-1-2, clause 2) and in the sectional specification(IEC 60794-3, clause 2).IEC 60793-1-20:2001, Optical fibres – Part 1-20: Measurement methods and test procedures –Fibre geometry3 Symbols and abbreviationsFor the purposes of this standard, the following symbols and abbreviations apply.λcc cabled fibre cut-off wavelengthdno
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.