SIST EN 2591-428:2004

Aerospace series - Elements of electrical and optical connection - Test methods - Part 428: Sinusoidal vibrations with passage of current for crimped terminal lugs

This standard specifies a method for determining the ability of crimped terminal lugs to withstand sinusoidal vibrations when a current is passing through them.
It shall be used together with EN 2591-100.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 428: Vibration, sinusförmug, bei Stromfluß, für gecrimpte Kabelschuhe

Diese Norm legt ein Verfahren zum Nachweis der Widerstandsfähigkeit von gecrimpten Kabelschuhen gegenüber sinusförmigen Schwingungen fest, wenn durch sie ein Strom geführt wird.
Sie ist in Verbindung mit EN 2591-100 anzuwenden.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 428: Vibrations sinusoidales avec passage de courant pour cosses serties

Aerospace series - Elements of electrical and optical connection - Test methods - Part 428: Sinusoidal vibrations with passage of current for crimped terminal lugs

General Information

• Status: Published
• Publication Date: 30-Apr-2004
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I08 - Imaginarni 08
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-May-2004
• Due Date: 01-May-2004
• Completion Date: 01-May-2004
• Ref Project: EN 2591-428:2002 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 428: Sinusoidal vibrations with passage of current for crimped terminal lugs

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 428: Sinusoidal vibrations with passage of current for crimped terminal lugsLuft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 428: Vibration, sinusförmug, bei Stromfluß, für gecrimpte KabelschuheSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 428: Vibrations sinusoidales avec passage de courant pour cosses sertiesAerospace series - Elements of electrical and optical connection - Test methods - Part 428: Sinusoidal vibrations with passage of current for crimped terminal lugs49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2591-428:2002SIST EN 2591-428:2004en01-maj-2004SIST EN 2591-428:2004SLOVENSKI
STANDARD



SIST EN 2591-428:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-428June 2002ICS 49.060English versionAerospace series - Elements of electrical and optical connection- Test methods - Part 428: Sinusoidal vibrations with passage ofcurrent for crimped terminal lugsSérie aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 428: Vibrationssinusoïdales avec passage de courant pour cosses sertiesLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüfverfahren - Teil 428: Vibration,sinusförmug bei Stromfluß für gecrimpte KabelschuheThis European Standard was approved by CEN on 8 February 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2591-428:2002 ESIST EN 2591-428:2004



EN 2591-428:2002 (E)2ForewordThis document (EN 2591-428:2002) has been prepared by the European Association of AerospaceManufacturers (AECMA).After enquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by December 2002, and conflicting national standards shall bewithdrawn at th
...