oSIST prEN 3687:2024

Aerospace series - Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 1 100 MPa/650 °C

This document specifies the characteristics of silver-plated Bolts normal Hexagon Head with relieved shank and long thread, in heat resisting steel FE-PA92HT (A286), tensile strength class 1 100 MPa at room temperature. The maximum test temperature of the material is 650 °C.

Luft- und Raumfahrt - Sechskantschrauben, Dünnschaft, langes Gewinde, aus hochwarmfestem Stahl FE-PA2601 (A286), versilbert - Klasse: 1 100 MPa/650 °C

No Scope available

Série aérospatiale - Vis à tête hexagonale normale, tige dégagée, filetage long, en acier résistant à chaud FE-PA2601 (A286), argentées - Classification : 1 100 MPa/650 °C

Le présent document spécifie les caractéristiques des vis argentées, à tête hexagonale normale, tige dégagée, filetage long, en acier résistant à chaud FE-PA2601 (A286), de classe de résistance à la traction de 1 100 MPa à température ambiante. La température maximale d’essai du matériau est de 650 °C.

Aeronavtika - Sorniki, normalna šestroba glava, tanko steblo, dolg navoj, iz toplotno odpornega jekla FE-PA2601 (A286), posrebreni - Klasifikacija: 1100 MPa/650 °C

General Information

• Status: Not Published
• Public Enquiry End Date: 02-Jul-2024
• ICS: 49.030.20 - Bolts, screws, studs
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 23-Apr-2024
• Due Date: 10-Sep-2024
• Ref Project: prEN 3687 - Aerospace series - Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 1 100 MPa/650 °C

Relations

• Revises: SIST EN 3687:2012 - Aerospace series - Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa/650°C
• Effective Date: 11-Oct-2023
• Revises: SIST EN 3687:2012/AC:2012 - Aerospace series - Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 1 100 MPa/650 °C
• Effective Date: 11-Oct-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 3687:2024
01-junij-2024
Aeronavtika - Sorniki, normalna šestroba glava, tanko steblo, dolg navoj, iz
toplotno odpornega jekla FE-PA2601 (A286), posrebreni - Klasifikacija: 1100
MPa/650 °C
Aerospace series - Bolts, normal hexagon head, relieved shank, long thread, in heat
resisting steel FE-PA2601 (A286), silver plated - Classification: 1 100 MPa/650 °C
Luft- und Raumfahrt - Sechskantschrauben, Dünnschaft, langes Gewinde, aus
hochwarmfestem Stahl FE-PA2601 (A286), versilbert - Klasse: 1 100 MPa/650 °C
Série aérospatiale - Vis à tête hexagonale normale, tige dégagée, filetage long, en acier
résistant à chaud FE-PA2601 (A286), argentées - Classification : 1 100 MPa/650 °C
Ta slovenski standard je istoveten z: prEN 3687
ICS:
49.030.20 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
oSIST prEN 3687:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 3687:2024

---------------------- Page: 2 ----------------------
oSIST prEN 3687:2024


DRAFT
EUROPEAN STANDARD
prEN 3687
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2024
ICS 49.030.20 Will supersede EN 3687:2010
English Version

Aerospace series - Bolts, normal hexagon head, relieved
shank, long thread, in heat resisting steel FE-PA2601
(A286), silver plated - Classification: 1 100 MPa/650 °C
Série aérospatiale - Vis à tête hexagonale normale, fût Luft- und Raumfahrt - Sechskantschrauben,
dégagé filetage long, en acier résistant à chaud FE- Dünnschaft, langes Gewinde, aus hochwarmfestem
PA2601 (A286), argentées - Classification: 1 100 Stahl FE-PA2601 (A286), versilbert - Klasse: 1 100
MPa/650 °C MPa/650 °C
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3687:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 3687:2024
prEN 3687:2024 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
4.1 Configuration – Dimensions – Tolerances . 4
4.2 Surface roughness . 4
4.3 Material . 5
4.
...