SIST EN 3456:2012

Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Sheet and strip, hot rolled - a ≤ 6 mm

This European Standard specifies the requirements relating to: Titanium alloy TI-P64001 (Ti-6Al-4V) Annealed Sheet and strip, hot rolled a ≤ 6 mm for aerospace applications.

Luft- und Raumfahrt - Titanlegierung TI-P64001 (Ti-6Al-4V) - Geglüht - Bleche und Bänder, warmgewalzt - a ≤ 6 mm

Diese Norm legt die Anforderungen an
Titanlegierung TI P64001 (Ti 6Al 4V)
Geglüht
Bleche und Bänder, warmgewalzt
a < oder = 6 mm
für Anwendungen in der Luft  und Raumfahrt fest.

Série aérospatiale - Alliage de titane TI-P64001 (Ti-6Al-4V) - Recuit - Tôles et bandes, laminées à chaud - a ≤ 6 mm

La présente norme spécifie les exigences relatives à :
Alliage de titane TI-P64001 (Ti-6Al-4V)
Recuit
Tôles et bandes, laminées à chaud
a < ou = 6 mm
pour les applications aérospatiales.

Aeronavtika - Titanova zlitina TI-P64001 (Ti-6Al-4V) - Žarjena - Pločevina in trakovi, vroče valjani - a ≤ 6 mm

Ta evropski standard določa zahteve glede: titanove zlitine TI-P64001 (Ti-6Al-4V); žarjene pločevine in trakovi; vroče valjani a ≤ 6 mm; za uporabo v aeronavtiki.

General Information

• Status: Published
• Publication Date: 09-Sep-2012
• ICS: 49.025.30 - Titanium
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 14-Aug-2012
• Due Date: 19-Oct-2012
• Completion Date: 10-Sep-2012
• Ref Project: EN 3456:2012 - Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Sheet and strip, hot rolled — a ≤ 6 mm

Relations

• Replaces: SIST EN 3456:2010 - Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Sheet and strip, hot rolled - a ≤ 6 mm
• Effective Date: 01-Oct-2012
• Replaces: SIST EN 3456:2010 - Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Sheet and strip, hot rolled - a ≤ 6 mm
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3456:2012
01-oktober-2012
1DGRPHãþD
SIST EN 3456:2010
$HURQDYWLND7LWDQRYD]OLWLQD7,37L$O9äDUMHQD3ORþHYLQDLQWUDNRYL
YURþHYDOMDQLD”PP
$HURVSDFHVHULHV7LWDQLXPDOOR\7,37L$O9$QQHDOHG6KHHWDQGVWULS
KRWUROOHGD”PP
/XIWXQG5DXPIDKUW7LWDQOHJLHUXQJ7,37L$O9*HJOKW%OHFKHXQG
%lQGHUZDUPJHZDO]WD”PP
6pULHDpURVSDWLDOH$OOLDJHGHWLWDQH7,37L$O95HFXLW7{OHVHWEDQGHV
ODPLQpHVjFKDXGD”PP
Ta slovenski standard je istoveten z: EN 3456:2012
ICS:
49.025.30 Titan Titanium
SIST EN 3456:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 3456:2012

---------------------- Page: 2 ----------------------

SIST EN 3456:2012


EUROPEAN STANDARD
EN 3456

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2012
ICS 49.025.30 Supersedes EN 3456:2009
English Version
Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) -
Annealed - Sheet and strip, hot rolled - a ≤ 6 mm
Série aérospatiale - Alliage de titane TI-P64001 (Ti-6Al-4V) Luft- und Raumfahrt - Titanlegierung TI-P64001 (Ti-6Al-4V)
- Recuit - Tôles et bandes, laminées à chaud - a ≤ 6 mm - Geglüht - Bleche und Bänder, warmgewalzt - a ≤ 6 mm
This European Standard was approved by CEN on 23 March 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3456:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 3456:2012
EN 3456:2012 (E)
Contents Page
Foreword . 3
Introduction . 4
1 Scope . 4
2 Normative references . 4

2

---------------------- Page: 4 ----------------------

SIST EN 3456:2012
EN 3456:2012 (E)
Foreword
This document (EN 3456:2012) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2013, and conflicting national standards shall be withdrawn at
the latest by January 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 3456:2009.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czec
...