oSIST prEN ISO 19490:2024

Dentistry - Sinus membrane elevator (ISO/DIS 19490:2024)

ISO 19490:2017 specifies requirements and their test methods for sinus membrane elevators used during the placement of dental implants for sinus floor lifting. It also specifies the requirements for their marking and labelling.

Zahnheilkunde - Sinusmembranelevator (ISO/DIS 19490:2024)

Médecine bucco-dentaire - Élévateur de membrane sinusienne (ISO/DIS 19490:2024)

L'ISO 19490:2017 spécifie les exigences et les méthodes d'essai relatives aux élévateurs de membrane sinusienne utilisés en implantologie dentaire pour relever le plancher sinusien. Il spécifie également les exigences relatives à leur marquage et étiquetage.

Zobozdravstvo - Sinusno membransko dvigalo (ISO/DIS 19490:2024)

General Information

• Status: Not Published
• Public Enquiry End Date: 29-Sep-2024
• ICS: 11.060.25 - Dental instruments
• Technical Committee: VAZ - Healthcare
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 18-Jul-2024
• Due Date: 05-Dec-2024
• Ref Project: prEN ISO 19490 - Dentistry - Sinus membrane elevator (ISO/DIS 19490:2024)

Relations

• Replaces: SIST EN ISO 19490:2017 - Dentistry - Sinus membrane elevator (ISO 19490:2017)
• Effective Date: 19-Oct-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2024
Nadomešča:
SIST EN ISO 19490:2017
Zobozdravstvo - Sinusno membransko dvigalo (ISO/DIS 19490:2024)
Dentistry - Sinus membrane elevator (ISO/DIS 19490:2024)
Zahnheilkunde - Sinusmembranelevator (ISO/DIS 19490:2024)
Médecine bucco-dentaire - Élévateur de membrane sinusienne (ISO/DIS 19490:2024)
Ta slovenski standard je istoveten z: prEN ISO 19490
ICS:
11.060.25 Zobotehnični instrumenti Dental instruments
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
International
Standard
ISO/DIS 19490
ISO/TC 106/SC 4
Dentistry — Sinus membrane
Secretariat: DIN
elevator
Voting begins on:
Médecine bucco-dentaire — Élévateur de membrane sinusienne
2024-07-08
Voting terminates on:
ICS: 11.060.25
2024-09-30
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 19490:2024(en)
DRAFT
ISO/DIS 19490:2024(en)
International
Standard
ISO/DIS 19490
ISO/TC 106/SC 4
Dentistry — Sinus membrane
Secretariat: DIN
elevator
Voting begins on:
Médecine bucco-dentaire — Élévateur de membrane sinusienne
ICS: 11.060.25 Voting terminates on:
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: [phone]
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 19490:2024(en)
ii
ISO/DIS 19490:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 2
5 Requirements . 2
5.1 General .2
5.2 Resistance to reprocessing .2
5.3 Hardness of the working part .2
5.4 Connection of shank and handle .2
5.5 Shape of working part .2
6 Test method . 4
7 Marking, labelling and packaging . 4

iii
ISO/DIS 19490:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the In
...