SIST EN ISO 3630-4:2023
(Main)Dentistry - Endodontic instruments - Part 4: Auxiliary instruments (ISO 3630-4:2023)
Dentistry - Endodontic instruments - Part 4: Auxiliary instruments (ISO 3630-4:2023)
This document specifies requirements and test methods for hand-held or mechanically operated
auxiliary instruments for performing root canal procedures such as barbed broaches, paste carriers,
explorers, cotton broaches and cannulae. This document specifies requirements for size, product
designation, safety considerations, instructions and labelling.
Zahnheilkunde - Wurzelkanalinstrumente - Teil 4: Hilfsinstrumente (ISO 3630-4:2023)
Dieses Dokument legt Anforderungen und Prüfverfahren für handgehaltene oder mechanisch betriebene Hilfsinstrumente zur Durchführung von Wurzelkanalverfahren wie Exstirpationsnadeln, Wurzelfüller, Wattenadeln und Kanülen fest. Dieses Dokument legt Anforderungen an Größe, Produktbezeichnung, Sicherheitsüberlegungen sowie Gebrauchsanweisung und Kennzeichnung fest.
Médecine bucco-dentaire - Instruments d'endodontie - Partie 4: Instruments auxiliaires (ISO 3630-4:2023)
Le présent document spécifie les exigences et les méthodes d’essai relatives aux instruments auxiliaires à main ou mécaniques servant aux interventions sur les canaux radiculaires, tels que les broches barbelées, les bourre-pâtes, les sondes exploratrices, les broches porte-coton et les canules. Le présent document spécifie les exigences relatives à la taille, à la désignation du produit, aux considérations de sécurité, aux instructions ainsi qu’à l’étiquetage.
Zobozdravstvo - Endodontski instrumenti - 4. del: Pomožni instrumenti (ISO 3630-4:2023)
Ta dokument določa zahteve in preskusne metode za ročne ali mehansko upravljane pomožne instrumente za izvajanje posegov na koreninskih kanalih, kot so živčne igle, nosilci za paste, raziskovalni pripomočki, igle za vato in kanile.
Ta dokument določa zahteve za velikost, namembnost izdelka, varnostne vidike, navodila in etiketiranje.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 3630-4:2023
01-november-2023
Nadomešča:
SIST EN ISO 3630-4:2009
Zobozdravstvo - Endodontski instrumenti - 4. del: Pomožni instrumenti (ISO 3630-
4:2023)
Dentistry - Endodontic instruments - Part 4: Auxiliary instruments (ISO 3630-4:2023)
Zahnheilkunde - Wurzelkanalinstrumente - Teil 4: Hilfsinstrumente (ISO 3630-4:2023)
Médecine bucco-dentaire - Instruments d'endodontie - Partie 4: Instruments auxiliaires
(ISO 3630-4:2023)
Ta slovenski standard je istoveten z: EN ISO 3630-4:2023
ICS:
11.060.25 Zobotehnični instrumenti Dental instruments
SIST EN ISO 3630-4:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 3630-4:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 3630-4:2023
EN ISO 3630-4
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2023
EUROPÄISCHE NORM
ICS 11.060.20 Supersedes EN ISO 3630-4:2009
English Version
Dentistry - Endodontic instruments - Part 4: Auxiliary
instruments (ISO 3630-4:2023)
Médecine bucco-dentaire - Instruments d'endodontie - Zahnheilkunde - Wurzelkanalinstrumente - Teil 4:
Partie 4: Instruments auxiliaires (ISO 3630-4:2023) Hilfsinstrumente (ISO 3630-4:2023)
This European Standard was approved by CEN on 24 June 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3630-4:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 3630-4:2023
EN ISO 3630-4:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 3630-4:2023
EN ISO 3630-4:2023 (E)
European foreword
This document (EN ISO 3630-4:2023) has been prepared by Technical Committee ISO/TC 106
"Dentistry" in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2024, and conflicting national standards
shall be withdrawn at the latest by February 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3630-4:2009.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 3630-4:2023 has been approved by CEN as EN ISO 3630-4:2023 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 3630-4:2023
---------------------- Page: 6 ----------------------
SIST EN ISO 3630-4:2023
INTERNATIONAL ISO
STANDARD 3630-4
Second edition
2023-08
Dentist
...
SLOVENSKI STANDARD
oSIST prEN ISO 3630-4:2022
01-maj-2022
Zobozdravstvo - Instrumenti za zobni kanal - 4. del: Pomožni instrumenti (ISO/DIS
3630-4:2022)
Dentistry - Endodontic instruments - Part 4: Auxiliary instruments (ISO/DIS 3630-4:2022)
Zahnheilkunde – Wurzelkanalinstrumente – Teil 4: Hilfsinstrumente (ISO/DIS 3630-
4:2022)
Médecine bucco-dentaire - Instruments d'endodontie - Partie 4: Instruments auxiliaires
(ISO/DIS 3630-4:2022)
Ta slovenski standard je istoveten z: prEN ISO 3630-4
ICS:
11.060.25 Zobotehnični instrumenti Dental instruments
oSIST prEN ISO 3630-4:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 3630-4:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO 3630-4:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 3630-4
ISO/TC 106/SC 4 Secretariat: DIN
Voting begins on: Voting terminates on:
2022-03-17 2022-06-09
Dentistry — Endodontic instruments —
Part 4:
Auxiliary instruments
Médecine bucco-dentaire — Instruments d'endodontie —
Partie 4: Instruments auxiliaires
ICS: 11.060.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 3630-4:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO 3630-4:2022
ISO/DIS 3630-4:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2022 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 3630-4:2022
ISO/DIS 3630-4:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification and Symbols .2
4.1 Classification . 2
4.2 Symbols . 2
5 Requirements . 3
5.1 Material . 3
5.2 Dimensions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.