iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1546-4:2004

(Main)

Identification card systems - Inter-sector electronic purse - Part 4: Data objects

Identification card systems - Inter-sector electronic purse - Part 4: Data objects

This part of EN 1546 defines the Tag values required and describes the Dictionary mechanisms necessary for their utilisation in order to achieve interoperability between IEP Systems where Data Elements have different lengths and/or the ordering of Data Elements in commands and responses is different from that defined in EN 1546-3. The mechanisms are based on TLV (Tag-length-value) definitions of each Data Element.

Identifikationskartensysteme - Branchenübergreifende elektronische Geldbörse - Teil 4: Datenobjekte

In diesem Teil von EN1546 werden die Werte der erforderlichen Identifizierungskennzeichen festgelegt und die für ihre Benutzung notwendigen Verzeichnismechanismen beschrieben, um die Fähigkeit zur Zusammenarbeit zwischen IEP-Systemen zu erreichen, in denen Datenelemente unterschiedliche Längen besitzen und/oder sich die Anordnung der Datenelemente in Befehlen und Rückmeldungen von der in EN 1546-3 definierten unterscheidet. Die Mechanismen beruhen auf TLV- (Identifizierungskennzeichen-Länge-Wert-) Definitionen für jedes Datenelement.

Systemes de cartes d'identification - Porte-monnaie électronique intersectoriel - Partie 4: Objets de données

La présente partie de la norme EN 1546 définit les valeurs d'Etiquette requises et décrit les mécanismes du Dictionnaire permettant leur utilisation de sorte que l'interopérabilité se produise entre les systemes IEP lorsque les Eléments de données ont des longueurs différentes et/ou que l'ordre des Eléments de données dans les commandes et les réponses est différent de celui défini dans l'EN 15463. Les mécanismes reposent sur les définitions TLV (étiquette, longueur, valeur) de chaque élément de données.

Identification card systems - Inter-sector electronic purse - Part 4: Data objects

General Information

Status
Withdrawn
Publication Date
30-Apr-2004
Withdrawal Date
11-Feb-2016
ICS
35.240.15 - Identification cards. Chip cards. Biometrics
Technical Committee
ITC - Information technology
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
28-Jan-2016
Due Date
20-Feb-2016
Completion Date
12-Feb-2016
Ref Project
EN 1546-4:1999 - Identification card systems - Inter-sector electronic purse - Part 4: Data objects

Buy Standard

EN 1546-4:2004EN 1546-4:2004
PreviousNext
Standard
EN 1546-4:2004
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Identification card systems - Inter-sector electronic purse - Part 4: Data objectsIdentifikationskartensysteme - Branchenübergreifende elektronische Geldbörse - Teil 4: DatenobjekteSystemes de cartes d'identification - Porte-monnaie électronique intersectoriel - Partie 4: Objets de donnéesIdentification card systems - Inter-sector electronic purse - Part 4: Data objects35.240.15Identifikacijske kartice in sorodne napraveIdentification cards and related devicesICS:Ta slovenski standard je istoveten z:EN 1546-4:1999SIST EN 1546-4:2004en01-maj-2004SIST EN 1546-4:2004SLOVENSKI
STAND
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST-TS CEN/TS 17661:2022(Main)
Personal identification – European enrolment guide for biometric ID documents (EEG)
CEN/TS 17661:2021

This technical specification provides guidance on
• capturing of facial images to be used as reference images in identity or similar documents,
• capturing of fingerprint images to be used as reference images in identity or similar documents,
• data quality maintenance for biometric reference data,
• data authenticity maintenance for biometric reference data.
The TS addresses the following aspects which are specific for biometric reference data capturing:
• biometric data quality and interoperability ensurance,
• data authenticity ensurance,
• morphing and other presentation attack detection,
• accessibility and usability,
• privacy and data protection,
• optimal process design.
The following aspects are out of scope:
• IT security,
• data capturing for verification purposes, e.g., in ABC gates.
• self-taken images, although a section on this has been included

  • Technical specification
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17631:2021(Main)
Personal identification - Biometric group access control
CEN/TS 17631:2021

This technical specification provides guidance on providing access
• To areas with physical access control, e.g., entertainment facilities, train stations, shops, libraries,banks, or border control,
• For small groups of persons, e.g., families with small children or seniors, or other accompanied persons in need of support,
• By means of biometric authentication technologies, e.g., facial, fingerprint, or vein recognition,
• In the European regulatory context.
The TS addresses the following aspects which are specific for biometric and group access:
• Accessibility and usability,
• User guidance including group guidance and interaction control,
• Privacy including data set content,
• Presentation attack detection,
• Applicable biometric technologies,
• Storage of reference data,
• Biometric process integration,
• Specific needs considering biometrics for groups,
• Biometric performance and error rates, and
• Group internal linkage.
The following aspects which reflect on generic access control issues are out of scope:
• IT security,
• Application specific physical security,
• Policy definition,
• Processes not related to biometric authentication, and
• Specific performance requirements of identification (1:N) and verification (1:1) applications.

  • Technical specification
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO/IEC 4909:2021(Main)
Identification cards -- Financial transaction cards -- Magnetic stripe data content for track 3
ISO/IEC 4909:2006

ISO/IEC 4909:2006 establishes specifications for financial transaction cards using track 3 and is intended to permit interchange based on the use of magnetic stripe encoded information. It specifies the data content and physical location of read/write information on track 3 and is to be used in conjunction with the relevant parts of ISO/IEC 7811 and ISO/IEC 7812.
ISO/IEC 4909:2006 recognizes the need for formats of track 3 which can be used independently of, or in conjunction with, track 2 as defined in ISO/IEC 7813. This approach is intended to permit the greatest degree of flexibility within the financial community in facilitating international interchange.
Using track 3 in conjunction with track 2 is a mode of operation in both on-line and off-line interchange environments. This mode of operation requires that the original encoded data on track 2 be read; the data on track 3 be read; and, if update is required, all the data on track 3 be rewritten.
Independent use of track 3 is an alternative mode of operation permitting both on-line interchange and off-line interchange based on mutual agreement between interested parties. It requires reading only of the data on track 3 and, if update is required, the rewriting of all the data on track 3.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    14 pages
    English language
    sale 15% off
SIST
SIST-TS CEN/TS 17489-1:2020(Main)
Personal identification - Secure and interoperable European Breeder Documents - Part 1: Framework overview
CEN/TS 17489-1:2020

This document provides an overview of a framework on breeder documents. It introduces the document structure of FprCEN/TS 17489 (all parts) that specifies how citizens retain the control of breeder document data and how they can use them to support identity proofing and verification. Moreover, the framework provides methodologies to assess and increase the level of trust in breeder documents.
This framework specifies methods for:
-   defining physical and logical/digital representations of a secure breeder document (hardware based, paper-based, server-based),
-   securing breeder document processes,
-   linking the document to its legitimate holder.
The following types of breeder documents are in the scope of the framework:
-   birth certificates,
-   marriage and partnership certificates,
-   death certificates.
The following breeder documents management processes including first-time application, later-in-life registration of an identity, and content update (e.g. name-changing) are in the scope of this framework:
-   registration,
-   issuance,
-   renewal,
-   inspection/verification,
-   revocation.
The specification of policies is out of scope.

  • Technical specification
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1332-3:2020(Main)
Identification card systems - User Interface — Part 3: Key pads
EN 1332-3:2020

This European Standard covers the ergonomic layout and usability of keypads. The keypad may consist of numeric, command and function keys and alphanumeric characters. On the basis that keypad layout impacts performance (keying speed, and errors), this European Standard aims to:
-   enhance usability;
-   ensure ease of use through consistency;
-   increase customer confidence;
-   reduce customer error;
-   improve operating time;
-   ensure ergonomic data entry.
This European Standard specifies the arrangement, the number and location of numeric, function and command keys, including placement of alphabetic characters on numeric keys. Design requirements and recommendations are also provided.
This standard applies to all identification card systems with a numeric keypad for use by the public for stationary or non-stationary devices. This standard also covers keypads on touch sensitive devices.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 16794-2:2019(Main)
Public transport - Communication between contactless readers and fare media - Part 2: Test plan for ISO/IEC 14443
CEN/TS 16794-2:2019

This document comes as a complement to the technical requirements expressed in CEN/TS 16794-1, for ensuring contactless communication interoperability between Public Transport (PT) devices or between PT devices compliant to CEN/TS 16794-1 and NFC mobiles devices compliant to NFC Forum specifications.
This document lists all the test conditions to be performed on a PT reader or a PT object in order to ensure that all the requirements specified in CEN/TS 16794-1 are met for the PT device under test.
This document applies to PT devices only:
-   PT readers which are contactless fare management system terminals acting as a PCD contactless reader based on the ISO/IEC 14443 series;
-   PT objects which are contactless fare media acting as a PICC contactless object based on the ISO/IEC 14443 series.
This document applies solely to the contactless communication layers described in Parts 1 to 4 of the ISO/IEC 14443 series. Application-to-application exchanges executed once contactless communication has been established at RF level fall outside the scope of this document. However, a test application will be used so as to make end-to-end transactions during tests on the RF communication layer.
This document does not duplicate the contents of the ISO/IEC 14443 series or ISO/IEC DIS 10373-6 standard. It makes reference to the ISO/IEC DIS 10373-6 applicable test methods, specifies the test conditions to be used and describes the additional specific test conditions that may be run.
The list of test conditions applicable to the PT device under test will be conditioned by the Information Conformance Statement (ICS) declaration made by the device manufacturer. For each test case, the test conditions are clearly specified in order to determine the pertinence to run or not the test case in accordance with the device capabilities or in accordance with the device manufacturer’s choice.
In order to facilitate the test report issuance, a test report template is included in Annex A of this document.
Although this document aims at becoming the primary basis for certification of contactless communication protocol applicable to PT readers and PT objects, it does not describe any certification or qualification processes as such processes should be defined between local or global transit industry stakeholders.

  • Technical specification
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 16794-1:2019(Main)
Public transport - Communication between contactless readers and fare media - Part 1: Implementation requirements for ISO/IEC 14443
CEN/TS 16794-1:2019

This document constitutes the 3rd edition of CEN/TS 16794 1. It sets out the technical requirements to be met by contactless Public Transport (PT) devices in order to be able to interface together using the ISO/IEC 14443 series contactless communications protocol.
This document applies to PT devices:
-   PT readers which are contactless fare management system terminals acting as a PCD contactless reader based on the ISO/IEC 14443 series;
-   PT objects which are contactless fare media acting as a PICC contactless object based on the ISO/IEC 14443 series.
This edition addresses interoperability of consumer-market NFC mobile devices, compliant to NFC Forum specifications, with above mentioned PT devices, aligns with the 4th edition of the ISO/IEC 14443 series and maintains the possibility for PT readers to comply with the requirements from EMV Contactless Interface Specification [1] and the present document.
An interface–oriented test approach is used to evaluate the conformity of PT devices and is defined in CEN/TS 16794 2.
Application-to-application exchanges executed once contactless communication has been established at RF level fall outside the scope of this document. In line with the rules on independence between OSI protocol layers, this document works on the assumption that application-to-application exchanges are not contingent on the type of contactless communication established or the parameters used for the low-level protocol layers that serve as the platform for these application-to-application exchanges.

  • Technical specification
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17054:2019(Main)
Biometrics multilingual vocabulary based upon the English version of ISO/IEC 2382-37:2012
EN 17054:2019

This European Standard establishes a systematic description of the concepts in the field of biometrics pertaining to recognition of human beings and reconciles variant terms in use in pre-existing biometric standards against the preferred terms, thereby clarifying the use of terms in this field.
Excluded from the scope of this document are concepts (represented by terms) from information technology, pattern recognition, biology, mathematics, etc. Biometrics uses such fields of knowledge as a basis.
In principle, mode specific terms are outside the scope of this European Standard.
Words in bold are defined in this document. Words that are not in bold are to be understood in their natural language sense. The authority for natural language use of terms in this document is the Concise Oxford English Dictionary (COD), Thumb Index Edition (tenth edition, revised, 2002). Words used in their natural language sense are considered out-of-scope for further definition in this document.

  • Standard
    76 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    77 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17261:2019(Main)
Biometric authentication for critical infrastructure access control - Requirements and Evaluation
CEN/TS 17261:2018

The technical specification
i) Specifies design, performance and attack resistance requirements for biometric systems used as part of an automated access control system protecting access to Critical Infrastructure (defined in Council directive 2008 /114 / EC)
ii) Describes methodologies for evaluation of biometric access control products against these requirements

  • Technical specification
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17262:2019(Main)
Personal identification - Robustness against biometric presentation attacks - Application to European Automated Border Control
CEN/TS 17262:2018

This Technical Specification is an application profile for the International Standard ISO/IEC 30107 Biometric presentation attack detection. It provides best practice recommendations for the implementation of Automated Border Control (ABC) systems in Europe.
Presentation Attack Detection (PAD) is addressed for facial and fingerprint recognition.
The biometric reference data can be stored in electronic Machine Readable Travel Documents (eMRTD) and/or EU Visa Information System (VIS).
The TS covers the robustness of the system, privacy and data protection aspects, usability and acceptance as well as countermeasures including their evaluation from the Biometrics perspective. Enrolment, issuance and verification applications of eMRTD other than border control are not in scope.

  • Technical specification
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day