SIST ETS 300 636 E1:2003

Transmission and Multiplexing (TM); Time Division Multiple Access (TDMA) point-to-multipoint digital radio systems in the frequency range 1 to 3 GHz

Standardisation of point to multipoint digital systems suitable for use in the bands up to about 5 GHz; produce ETR containing main applic -ations and the parameters to be standardised for these systems; ETS to follow

Prenos in multipleksiranje (TM) – Časovno porazdeljeni sodostop (TDMA) – Digitalni radijski sistemi tipa točka-več točk v frekvenčnem območju 1 do 3 GHz

General Information

• Status: Published
• Publication Date: 30-Nov-2003
• Withdrawal Date: 30-Sep-2003
• ICS: 33.040.20 - Transmission systems
• ICS: 33.060.30 - Radio relay and fixed satellite communications systems
• Technical Committee: RES - Radio equipment and systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2003
• Due Date: 01-Dec-2003
• Completion Date: 01-Dec-2003
• Ref Project: ETSI ETS 300 636 ed.1 (1996-10) - Transmission and Multiplexing (TM); Time Division Multiple Access (TDMA) point-to-multipoint digital radio systems in the frequency range 1 to 3 GHz

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ETS 300 636 E1:2003
01-december-2003
3UHQRVLQPXOWLSOHNVLUDQMH70±ýDVRYQRSRUD]GHOMHQLVRGRVWRS7'0$±
'LJLWDOQLUDGLMVNLVLVWHPLWLSDWRþNDYHþWRþNYIUHNYHQþQHPREPRþMXGR*+]
Transmission and Multiplexing (TM); Time Division Multiple Access (TDMA) point-to-
multipoint digital radio systems in the frequency range 1 to 3 GHz
Ta slovenski standard je istoveten z: ETS 300 636 Edition 1
ICS:
33.040.20 Prenosni sistem Transmission systems
33.060.30 Radiorelejni in fiksni satelitski Radio relay and fixed satellite
komunikacijski sistemi communications systems
SIST ETS 300 636 E1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 636 E1:2003

---------------------- Page: 2 ----------------------

SIST ETS 300 636 E1:2003
EUROPEAN ETS 300 636
TELECOMMUNICATION October 1996
STANDARD
Source: ETSI TC-TM Reference: DE/TM-04015
ICS: 33.060.30
Key words: TDMA, multipoint, transmission, radio
Transmission and Multiplexing (TM);
Time Division Multiple Access (TDMA)
point-to-multipoint digital radio systems
in the frequency range 1 to 3 GHz
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: [e-mail]
Tel.: [phone] - Fax: [phone]
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1996. All rights reserved.

---------------------- Page: 3 ----------------------

SIST ETS 300 636 E1:2003
Page 2
ETS 300 636: October 1996
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 636 E1:2003
Page 3
ETS 300 636: October 1996
Contents
Foreword .5
Introduction.5
1 Scope .7
1.1 Applications.7
1.2 Frequencies .7
1.3 Access method .7
2 Normative references.7
3 Symbols and abbreviations .8
3.1 Symbols .8
3.2 Abbreviations .8
4 General system architecture .9
4.1 Sub-system types .9
4.2 System characteristics.10
4.2.1 System capacity .10
4.2.2 Transmission error performance.10
4.2.3 Round trip delay .10
4.2.4 Transparency .10
4.2.5 Telecommunications Management Network (TMN) interface.10
5 Radio characteristics.10
5.1 Frequency bands .10
5.2 Channel arrangement .10
5.3 Transmitter characteristics .10
5.3.1 TX power range.10
5.3.2 Spectrum mask .11
5.3.3 Transmitter spurious emissions .12
5.3.4 RF tolerance.13
5.4 Receiver characteristics.13
5.4.1 Input level range.13
5.4.2 Spurious emissions .13
5.4.3 BER performance.13
5.4.4 Interference sensitivity.13
5.4.4.1 Adjacent channel rejection .13
5.4.4.2 Co-channel rejection.14
5.4.5 Image frequency rejection.14
5.5 RF equipment port .14
5.5.1 RF interface.14
5.5.2 Return loss .14
6 Types of services/subscriber and exchange interfaces .15
7 Power supply and environmental characteristics .15
7.1 Power supply.15
7.2 Environmental conditions.15
7.2.1 Equipment within weather protected locations .15
7.2.2 Equipment for non-weather protected locations.16
7.3 Electromagnetic compatibility conditions .16
7.4 Feeder/Antenna requirements .16
History.17

---------------------- Page: 5 ----------------------

SIST ETS 300 636 E1:2003
Page 4
ETS 300 636: October 1996
Blank page

---------------------- Page: 6 ----------------------

SIST ETS 300 636 E1:2003
Page 5
ETS 300 636: October 1996
Foreword
This European Telecommunication Standard (ETS) has been produced by the Transmission and
Multiplexing (TM) Technical Committee of the European Telecommunications Standards Institute (ETSI).
Transposition dates
Date of adoption of this ETS: 4 October 1996
Date of latest announcement of this ETS (doa): 31 January 1997
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 31 July 1997
Date of withdrawal of any conflicting National Standard (dow): 31 July 1997
Introduction
The main field of application of Point-to-Multipoint (P-MP) systems is to provide access to both the Public
Switched Telephone Network (PSTN) and private networks (Private Digital Network (PDN)), particularly
for remote subscribers. By means of P-MP systems the network service area may be extended to cover
both distant and scattered subscriber locations.
These remote subscribers, in a similar manner to the city subscriber, are offered the full range of services
by the particular public or private network. Subscribers have access to these services by means of the
various standardized user network interfaces (2-wire loop, data, .).
P-MP applications in the metropolitan and urban environment are mainly for the provision of new data
services for business subscribers and for the extension of Integrated Services Digital Network (ISDN)
services to local subscribers.
The frequency bands below 3 GHz are particularly suitable for the extension of telecommunications
services to distant rural and suburban subscribers.
P-MP systems provide standard network interfaces and transparently connect subscribers to the
appropriate network node (local switch, .). These systems allow a service to be connected to a number
of subscribers ranging from a few users to several hundred and over a wide range of distances.
P-MP systems are generally, but not necessarily, configured as pre-assigned systems or as Demand
Assigned Multiple Access (DAMA) radio systems.
The essential features of a typical P-MP DAMA radio systems are:
- efficient use of the radio spectrum;
- concentration;
- transparency.
Radio is often the ideal way of obtaining communications at low cost and almost independent of distance
and difficult topology. Moreover, only a small number of sites are required for these installations, thus
facilitating rapid implementation and minimizing maintenance requirements of the systems.
Concentration means that N subscribers can share n channels (N being larger than n), allowing better use
to be made of the available frequency spectrum and at a lower equipment cost. The term "multi-access" is
derived from the fact that every subscriber has access to every channel (instead of a fixed assignment as
in most multiplex systems). When a call is initiated one of the available channels is allocated to it.
When the call is terminated, the channel is released for another call.

---------------------- Page: 7 ----------------------

SIST ETS 300 636 E1:2003
Page 6
ETS 300 636: October 1996
Concentration requires the use of distributed intelligent control which in turn allows many other operation
and maintenance functions to be added.
Transparency means that the exchange and the telephone communicate with each other without being
aware of the radio link.

---------------------- Page: 8 ----------------------

SIST ETS 300 636 E1:2003
Page 7
ETS 300 636: October 1996
1 Scope
1.1 Applications
The scope of this European Telecommunication Standard (ETS) covers the following Point-to-Multipoint
(P-MP) applications:
- voice;
- telex;
- low speed data (up to 64 kbit/s);
- Integrated Services Digital Network (ISDN) (basic rate access).
1.2 Frequencies
This ETS covers fixed P-MP services operating in the 1,5 GHz, 2,2 GHz, 2,4 GHz and 2,6 GHz bands and
having the frequency plans as given in CEPT Recommendation T/R 13-01 [1] for 1,5 GHz, 2,2 GHz and
2,6 GHz bands. For the 2,4 GHz band, the CCIR Recommendation F.701 [2] is applicable.
1.3 Access method
This ETS covers Time Division Multiple Access (TDMA) systems.
2 Normative references
This ETS incorporates by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this ETS only when incorporated in it by amendment or revision. For undated references, the
latest edition of the publication referred to applies.
[1] CEPT T/R 13-01: "Preferred channel arrangements for fixed services in the
range 1 to 3 GHz".
[2] CCIR Recommendation F.701 (1990): "Radio-frequency channel arrangements
for analogue and digital point-to-multipoint radio systems operating in frequency
bands in the range 1.427 to 2.690 GHz (1.5, 1.8, 2.0, 2.2, 2.4 and 2.6 GHz)".
[3] CCITT Recommendation G.821 (1990): "Error performance of an international
digital connection forming part of an integrated services digital network".
[4] ITU-T Recommendation G.773 (1990): "Protocol suites for Q-interfaces for
management of transmission systems".
[5] ETS 300 631-2: "Transmission and Multiplexing (TM); Digital Radio Relay
Systems (DRRS); Antennas in bands 1 to 3 GHz; Antennas for
point-to-multipoint radio links".
[6] ITU-T Recommendation G.712 (1993): "Transmission performance
characteristics of pulse code modulation".
[7] CCITT Recommendation R.20 (1990): "Telegraph modem for subscriber lines".
[8] CCITT Recommendation G.703 (1991): "Physical/electrical characteristics of
hierarchical digital interfaces".
[9] ETS 300 012: "Integrated Services Digital Network (ISDN); Basic user-network
interface Layer 1 specification and test principles".
[10] ETS 300 324 Parts 1 to 5 and Part 7: "Signalling Protocols and Switching (SPS);
V interfaces at the digital Local Exchange (LE) V5.1 interface for the support of
Access Network (AN)".

---------------------- Page: 9 ----------------------

SIST ETS 300 636 E1:2003
Page 8
ETS 300 636: October 1996
[11] ETS 300 347 Parts 1 and 2: "Signalling Protocols and Switching (SPS); V
interfaces at the digital Local Exchange (LE) V5.2 interface for the support of
Access Network (AN)".
[12] ETS 300 132 Parts 1 and 2: "Equipment Engineering (EE); Power supply
interface at the input to telecommunications equipment".
[13] ETS 300 019 Part 1 (sub-parts 0 to 7) and Part 2 (sub-parts 0 to 7): "Equipment
Engineering (EE); Environmental conditions and environmental tests for
telecommunications equipment".
[14] ETS 300 385: "Radio Equipment and Systems (RES); E
...