oSIST prEN ISO 182-3:2022
(Main)Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method (ISO/FDIS 182-3:2023)
Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method (ISO/FDIS 182-3:2023)
The principle of the method is maintaining a test portion of the PVC at an agreed temperature in a nitrogen gas stream, absorbing the hydrogen chloride evolved in a given amount of demineralized water, and potentiometrically determining the amount of hydrogen chloride evolved in relation to the recorded change in conductivity of the water. The method is recommended for compounded PVC materials and products only, although it can be used for polymers in powder form under appropriate conditions.
Kunststoffe - Bestimmung der Neigung von Formmassen und Erzeugnissen auf der Basis von Vinylchlorid-Homopolymeren und -Copolymeren, bei erhöhten Temperaturen Chlorwasserstoff und andere saure Produkte abzugeben - Teil 3: Leitfähigkeitsverfahren (ISO/FDIS 182-3:2023)
1.1 Dieses Dokument legt ein Verfahren zur Bestimmung der thermischen Stabilität von Formmassen und Erzeugnissen bei erhöhter Temperatur fest, die auf der Basis von Vinylchlorid-Homopolymeren und Copolymeren (im folgenden Text abgekürzt als PVC) hergestellt sind und die eine Dehydrochlorierung (Abspaltung von Chlorwasserstoff) durchlaufen.
1.2 Dieses Dokument ist zur Charakterisierung von Formmassen und Erzeugnissen aus PVC anwendbar, insbesondere hinsichtlich der Wirksamkeit ihrer Wärmestabilisierungssysteme.
Es ist anwendbar für gefärbte PVC-Formmassen und PVC-Erzeugnisse, bei denen eine Verfärbungsprüfung unter Wärmeeinwirkung unbefriedigend sein kann.
1.3 Dieses Dokument ist anwendbar für endgefertigte Werkstoffe und Erzeugnisse aus PVC. Unter bestimmten Bedingungen, die zwischen den interessierten Parteien zu vereinbaren sind, kann es für Polymere in Pulverform angewendet werden.
Dieses Dokument gilt nicht für trockene Mischungen von PVC-Formmassen, da solche Werkstoffe möglicherweise nicht homogen genug sind.
1.4 Dieses Dokument gilt nicht für Formmassen und Erzeugnisse aus PVC, die bei erhöhten Temperaturen andere Zersetzungsprodukte als Chlorwasserstoff abgeben, welche die Leitfähigkeit von Wasser, wenn sie darin absorbiert werden, verändern können. In diesem Fall muss ein Verfahren angewendet werden, das für die Bestimmung von Chloridionen (Cl−) in der Absorptionslösung geeignet ist (siehe ISO 182 4 [2]).
1.5 Dieses Dokument kann auch für andere Kunststoffe angewendet werden, die bei Erwärmung, entsprechend den in den einschlägigen Spezifikationen festgelegten Bedingungen oder entsprechend den Vereinbarungen zwischen den interessierten Parteien, Wasserstoffchlorid oder andere Halogenwasserstoffe abgeben.
WARNUNG — Die Anwendung dieses Dokuments kann die Anwendung gefährlicher Stoffe, Arbeits-gänge und Geräte mit sich bringen. Dieses Dokument beansprucht nicht, alle mit seiner Anwendung verbundenen Sicherheitsprobleme zu behandeln. Es liegt in der Verantwortung des Anwenders dieses Dokuments, vor der Anwendung geeignete Vorkehrungen für die Sicherheit und den Schutz der Gesundheit zu treffen und zu ermitteln, welche gesetzlichen Beschränkungen gelten.
Plastiques - Détermination de la tendance des compositions et produits à base d’homopolymères et de copolymères du chlorure de vinyle à dégager du chlorure d’hydrogène et éventuellement d’autres produits acides à températures élevées - Partie 3: Méthode conductimétrique (ISO/FDIS 182-3:2023)
Le présent document spécifie une méthode pour la détermination de la stabilité thermique à températures élevées des compositions et produits à base d’homopolymères et de copolymères du chlorure de vinyle (PVC dans le texte qui suit), qui sont sujets à une déhydrochloruration (dégagement de chlorure d’hydrogène).
Le présent document s’applique à la caractérisation des compositions et produits à base de PVC, en particulier en ce qui concerne l’efficacité de leurs systèmes de stabilisation à la chaleur.
Il est applicable aux compositions et produits à base de PVC colorés, lorsqu’un essai de décoloration sous l’action de la chaleur peut être insatisfaisant.
Le présent document est applicable aux matériaux et produits composés de PVC. Il peut être applicable aux polymères sous forme de poudres dans des conditions appropriées devant faire l’objet d’un accord entre les parties intéressées.
Le présent document ne s’applique pas aux compositions de PVC sous forme de mélanges secs, ces matériaux pouvant ne pas être suffisamment homogénéisés.
Le présent document ne s’applique pas aux compositions et produits à base de PVC qui dégagent, à températures élevées, des produits de décomposition en plus du chlorure d’hydrogène pouvant avoir une incidence sur la conductivité de l’eau lorsqu’ils y sont absorbés. Dans ce cas, une méthode appropriée pour la détermination des ions chlorures (Cl−) dans la solution absorbante doit être employée (voir l’ISO 182-4[2]).
Le présent document peut aussi être appliqué à d’autres matériaux plastiques pouvant dégager du chlorure d’hydrogène ou d’autres halogénures d’hydrogène lorsqu’ils sont chauffés dans des conditions particulières prescrites dans les spécifications appropriées ou convenues entre les parties intéressées.
Polimerni materiali - Ugotavljanje tendence zmesi in proizvodov na osnovi homo- in kopolimerov vinilklorida, da pri povišanih temperaturah sproščajo klorovodik ali druge kisle produkte - 3. del: Konduktometrijska metoda (ISO/FDIS 182-3:2023)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 182-3:2022
01-september-2022
Polimerni materiali - Ugotavljanje tendence zmesi in proizvodov na osnovi homo-
in kopolimerov vinilklorida, da pri povišanih temperaturah sproščajo klorovodik ali
druge kisle produkte - 3. del: Konduktometrijska metoda (ISO/DIS 182-3:2022)
Plastics - Determination of the tendency of compounds and products based on vinyl
chloride homopolymers and copolymers to evolve hydrogen chloride and any other
acidic products at elevated temperatures - Part 3: Conductometric method (ISO/DIS 182-
3:2022)
Kunststoffe - Bestimmung der Neigung von Formmassen und Erzeugnissen auf der
Basis von Vinylchlorid-Homopolymeren und -Copolymeren, bei erhöhten Temperaturen
Chlorwasserstoff und andere saure Produkte abzugeben - Teil 3: Leitfähigkeitsverfahren
(ISO/DIS 182-3:2022)
Plastiques - Détermination de la tendance des compositions et produits à base
d’homopolymères et de copolymères du chlorure de vinyle à dégager du chlorure
d’hydrogène et éventuellement d’autres produits acides à températures élevées - Partie
3: Méthode conductimétrique (ISO/DIS 182-3:2022)
Ta slovenski standard je istoveten z: prEN ISO 182-3
ICS:
83.080.20 Plastomeri Thermoplastic materials
oSIST prEN ISO 182-3:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 182-3:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO 182-3:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 182-3
ISO/TC 61/SC 9 Secretariat: KATS
Voting begins on: Voting terminates on:
2022-06-09 2022-09-01
Plastics — Determination of the tendency of compounds
and products based on vinyl chloride homopolymers and
copolymers to evolve hydrogen chloride and any other
acidic products at elevated temperatures —
Part 3:
Conductometric method
Plastiques — Détermination de la tendance des compositions à base d'homopolymères et copolymères
du chlorure de vinyle à dégager du chlorure d'hydrogène et éventuellement d'autres produits acides à
températures élevées —
Partie 3: Méthode conductimétrique
ICS: 83.080.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 182-3:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO 182-3:2022
ISO/DIS 182-3:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2022 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 182-3:2022
ISO/DIS 182-3:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Principle .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.