SIST EN IEC 60238:2018/A11:2022

Edison screw lampholders

2021-03-12: This A11 was created  to allow citation of EN IEC 60238:2018/A1 (PR=61856)

Lampenfassungen mit Edisongewinde

Douilles à vis Edison pour lampes

Okovi za žarnice in sijalke z Edisonovim navojem - Dopolnilo A11

General Information

• Status: Withdrawn
• Publication Date: 12-Dec-2021
• Withdrawal Date: 13-Sep-2022
• ICS: 29.140.10 - Lamp caps and holders
• Technical Committee: IESV - Lamps and related equipment
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 13-Sep-2022
• Due Date: 06-Oct-2022
• Completion Date: 14-Sep-2022
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Mandate: M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
• Ref Project: EN IEC 60238:2018/A11:2021 - Edison screw lampholders

Relations

• Amends: SIST EN IEC 60238:2018 - Edison screw lampholders (IEC 60238:2016)
• Effective Date: 07-Dec-2021
• Amends: SIST EN IEC 60238:2018/A1:2018 - Edison screw lampholders (IEC 60238:2016/A1:2017 + COR1:2018)
• Effective Date: 16-Mar-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60238:2018/A11:2022
01-februar-2022
Okovi za žarnice in sijalke z Edisonovim navojem - Dopolnilo A11
Edison screw lampholders
Lampenfassungen mit Edisongewinde
Douilles à vis Edison pour lampes
Ta slovenski standard je istoveten z: EN IEC 60238:2018/A11:2021
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
SIST EN IEC 60238:2018/A11:2022 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60238:2018/A11:2022

---------------------- Page: 2 ----------------------
SIST EN IEC 60238:2018/A11:2022

EUROPEAN STANDARD EN IEC 60238:2018/A11

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2021
ICS 29.140.10
English Version
Edison screw lampholders
Douilles à vis Edison pour lampes Lampenfassungen mit Edisongewinde
This amendment A11 modifies the European Standard ; it was approved by CENELEC on 2021-10-06. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a national
standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60238:2018/A11:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60238:2018/A11:2022
EN IEC 60238:2018/A11:2021 (E)
European foreword
This document (EN IEC 60238:2018/A11:2021) has been prepared by CLC/TC 34 “Lighting”.
The following dates are fixed:
• latest date by which this document has to be (dop) 2022-10-06
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) 2024-10-06
conflicting with this document have to be
withdrawn
This document amends EN IEC 60238:2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Free Trade Association, and supports essential
requirements of EU Directive(s) / Regulation(s).
For relationship with EU Directive(s) / Regulation(s), see informative Annex ZZ, which is an integral
part of this document.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
2

---------------------- Page: 4 ----------------------
SIST EN IEC 60238:2018/A11:2022
EN IEC 60238:2018/A11:2021 (E)
1 Modification of Annex ZA, “Normative references to international
publications with their corresponding European publications”
Replace the Annex ZA with the following Annex ZA:
“
Annex ZA
(normative)

Normative references to international publications with their
corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60061-1 (mod) 1969 Lamp caps and holders together with EN 60061-1 1993
gauges for the control of interchangeability
and safety - Part 1: Lamp caps
IEC 60061-2 (mod) 1969 Lamp caps and holders together with EN 60061-2 1993
gauges for the control of interchangeability
and safety - Part 2: Lampholders
IEC 60061-3 (mod) 1969 Lamp caps and holders together with EN 60061-3 1993
gauges for the control of interchangeability
and safety - Part 3: Gauges
 Environmental testing - Part 2-20: Tests - EN 60068-2-20 2008
Test T: Test methods for solderability and
resistance to soldering heat of devices
with leads
IEC 60068-2-32 1975 Basic environmental testing procedures - EN 60068-2-32 1993
Part 2: Tests - Test Ed: Free fall
IEC 60068-2-75 2014 Environmental testing - Part 2-75: Tests - EN 60068-2-75 2014
Test Eh: Hammer tests
IEC 60112 2003 Method for the determination of the proof EN 60112 2003
and the comparative tracking indices of
solid insulating materials
+ A1 2009 + A1 2009
IEC 60227 series Polyvinyl chloride insulated cables of rated - -
voltages up to and including 450/750 V --
Part 1: General requirements
IEC 60245 series Rubber insulated cables - Rated voltages - -
up to and including 450/750 V - Part 1:
General requirem
...