56 - Dependability

IEC 62960:2020 provides guidance on a review methodology for dependability from a technical perspective that is applicable at all stages of a system life cycle. Its application can improve the dependability of a system throughout its life cycle by triggering appropriate actions at appropriate times to address potential dependability problems.
It provides guidance for developers, manufacturers, users and third-party independent reviewers such as consulting organizations.
This document describes...view more

IEC 61163-2:2020 provides guidance on RSS techniques and procedures for electrical, electronic, and mechanical components. This document is procedural in nature and is not, and cannot be, exhaustive with respect to component technologies due to the rapid rate of developments in the component industry. This document is:
a) intended for component manufacturers as a guideline;
b) intended for component users as a guideline to negotiate with component manufacturers on RSS requirements;
c) intende...view more

IEC 61123:2019 is intended to define a procedure to verify if a reliability of an item/system complies with the stated requirements. The requirement is assumed to be specified as the percentage of success (success ratio) or the percentage of failures (failure ratio). This document can be used where a number of items are tested (number of trials performed) and classified as passed or failed. It can also be used where one or a number of items are tested repeatedly. The procedures are based on the ...view more

IEC 31010:2019 is published as a double logo standard with ISO and provides guidance on the selection and application of techniques for assessing risk in a wide range of situations. The techniques are used to assist in making decisions where there is uncertainty, to provide information about particular risks and as part of a process for managing risk. The document provides summaries of a range of techniques, with references to other documents where the techniques are described in more detail. Th...view more

IEC 62402:2019 provides requirements and guidance for obsolescence management applicable to any organization that is dependent on another organization to obtain value from the usefulness of the items that it provides. A cost-effective obsolescence management process and the activities used to implement the process are applicable throughout all phases of an item’s life cycle. This document covers the following areas:
• establishing an obsolescence management policy;
• establishing an infrastruc...view more

IEC 60812:2018 explains how failure modes and effects analysis (FMEA), including the failure modes, effects and criticality analysis (FMECA) variant, is planned, performed, documented and maintained. The purpose of failure modes and effects analysis (FMEA) is to establish how items or processes might fail to perform their function so that any required treatments could be identified. An FMEA provides a systematic method for identifying modes of failure together with their effects on the item or p...view more

IEC 62853:2018 provides guidance in relation to a set of requirements placed upon system life cycles in order for an open system to achieve open systems dependability. This document elaborates on IEC 60300-1 by providing details of the changes needed to accommodate the characteristics of open systems. It defines process views based on ISO/IEC/IEEE 15288:2015, which identifies the set of system life cycle processes. This document is applicable to life cycles of products, systems, processes or ser...view more

IEC 61709:2017 is also available as IEC 61709:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61709:2017 gives guidance on the use of failure rate data for reliability prediction of electric components used in equipment. The method presented in this document uses the concept of reference conditions which are the typical values of stresses that are observed by components in the majori...view more

IEC 60300-3-3:2017 establishes a general introduction to the concept of life cycle costing and covers all applications. Although costs incurred over the life cycle consist of many contributing elements, this document particularly highlights the costs associated with the dependability of an item. This forms part of an overall dependability management programme as described in IEC 60300-1. Guidance is provided on life cycle costing for use by managers, engineers, finance staff, and contractors; it...view more

IEC 62550:2017 describes requirements for spare parts provisioning as a part of supportability activities that affect dependability performance so that continuity of operation of products, equipment and systems for their intended application can be sustained. This document is intended for use by a wide range of suppliers, maintenance support organizations and users and can be applied to all items.

IEC 61703:2016 provides mathematical expressions for selected reliability, availability, maintainability and maintenance support measures defined in IEC 60050­192:2015. In addition, it introduces some terms not covered in IEC 60050-192:2015. They are related to aspects of the system of item classes (see hereafter). According to IEC 60050-192:2015, dependability [192-01-22] is the ability of an item to perform as and when required and an item [192-01-01] can be an individual part, component, devi...view more

IEC 61078:2016 this International Standard describes:
- the requirements to apply when reliability block diagrams (RBDs) are used in dependability analysis;
- the procedures for modelling the dependability of a system with reliability block diagrams;
- how to use RBDs for qualitative and quantitative analysis;
- the procedures for using the RBD model to calculate availability, failure frequency and reliability measures for different types of systems with constant (or time dependent) probabil...view more

IEC TR 63039:2016(E) provides guidance on probabilistic risk analysis (hereafter referred to as risk analysis) for the systems composed of electrotechnical items and is applicable (but not limited) to all electrotechnical industries where risk analyses are performed. This document deals with the following topics from the perspective of risk analysis:
- defining the essential terms and concepts;
- specifying the types of events;
- classifying the occurrences of events;
- describing the usage ...view more

IEC TS 62775:2016(E) which is a Technical Specification, shows how the IEC dependability suite of standards, systems engineering and the IFRS and IAS standards can support the requirements of asset management, as described by the ISO 5500x suite of standards. This Technical Specification therefore provides:
- a brief introduction to asset management and the requirements for an AMS,
- a description of the benefits from the use of an established and common set of AMS processes and procedures, to...view more

IEC 61882:2016 is available as IEC 61882:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61882:2016 provides a guide for HAZOP studies of systems using guide words. It gives guidance on application of the technique and on the HAZOP study procedure, including definition, preparation, examination sessions and resulting documentation and follow-up. Documentation examples, as well as a br...view more

ISO/IEC 14543-5-7:2015(E) specifies the architecture and framework for the remote access of IGRS devices and services in the home electronic system. The remote access communications protocol and application profiles are specified in other parts of this series. The relationship among these parts is specified in this standard. It is applicable to the remote access of an IGRS sub-network (called an IGRS subnet) for resource sharing and service collaboration among home and/or remote computers, consu...view more

IEC 62741:2015 gives guidance on the content and application of a dependability case and establishes general principles for the preparation of a dependability case. This standard is written in a basic project context where a customer orders a system that meets dependability requirements from a supplier and then manages the system until its retirement. The methods provided in this standard may be modified and adapted to other situations as needed. The dependability case is normally produced by th...view more

IEC 62740:2015 describes the basic principles of root cause analysis (RCA) and specifies the steps that a process for RCA should include. This standard identifies a number of attributes for RCA techniques which assist with the selection of an appropriate technique. It describes each RCA technique and its relative strengths and weaknesses. RCA is used to analyse the root causes of focus events with both positive and negative outcomes, but it is most commonly used for the analysis of failures and ...view more

IEC 60300-1:2014 establishes a framework for dependability management. It provides guidance on dependability management of products, systems, processes or services involving hardware, software and human aspects or any integrated combinations of these elements. It presents guidance on planning and implementation of dependability activities and technical processes throughout the life cycle taking into account other requirements such as those relating to safety and the environment. This standard gi...view more

IEC 62198:2013 provides principles and generic guidelines on managing risk and uncertainty in projects. In particular it describes a systematic approach to managing risk in projects based on ISO 31000, Risk management - Principles and guidelines. Guidance is provided on the principles for managing risk in projects, the framework and organizational requirements for implementing risk management and the process for conducting effective risk management. This standard is not intended for the purpose ...view more