03.120.99 - Other standards related to quality

This document specifies a method for determining the capability of a manufacturer to use the friction
stir welding (FSW) process for the production of products of the specified quality. It specifies quality
requirements, but does not assign those requirements to any specific product group.
In this document, the term “aluminium” refers to aluminium and its alloys.
This document does not apply to friction stir spot welding which is covered by the ISO 18785 series.

This European Standard specifies methods for measuring the end-to-end transit time of domestic and cross-border Single Piece Priority Mail (SPPM), collected, processed and delivered by postal service operators. It considers methods using representative end-to-end samples for all types of single piece priority mail services for addressed mail with defined transit-time service levels offered to the customer. This standard is applicable to the measurement of End-to-End priority mail services.
The ...view more

This document specifies a method using a barcoding system for tracing potential isolated defects that can be present in the following kinds of coated or uncoated steel flat products, for example:
-   electro-galvanised surface
-   galvanised surface
-   galvannealed surface
-   cold rolled surface
This method, named “quality tracking”, aims at transferring additional material information to the steel users, especially the location of some isolated defects, in a reliable way. This method enables the...view more

This part of ISO/IEC 80079 specifies particular requirements and information for establishing and maintaining a quality system to manufacture Ex equipment productsincluding protective systems in accordance with the Ex certificate. While it does not preclude the use of other quality systems that are compatible with the objectives of ISO 9001:2008 2015 and which provide equivalent results, the minimum requirements shall be in accordance with this standard.

This standard specifies requirements for the durability testing of coatings most commonly used for space applications, i.e.:
-   Thin film optical coatings
-   Thermo-optical and thermal control coatings (the majority are paints, metallic deposits and coatings for stray light reduction)
-   Metallic coatings for other applications (RF, electrical, corrosion protection)
This standard covers testing for both ground and in-orbit phases of a space mission, mainly for satellite applications.
This sta...view more

EN-IEC 62941 is applicable to organizations manufacturing photovoltaic (PV) modulescertified to IEC 61215 series and IEC 62108 for design qualification and type approval andIEC 61730 for safety qualification and type approval. The design qualification and typeapproval of PV modules depend on appropriate methods for product and process design, aswell as appropriate control of materials and processes used to manufacture the product. Thisdocument lays out best practices for product design, manufact...view more

This Standard defines the requirements for the control of nonconformances.
This Standard applies to all deliverable products and supplies, at all levels, which fail to conform to project requirements.
This Standard is applicable throughout the whole project lifecycle as defined in ECSS-M-ST-10.
This standard may be tailored for the specific characteristics and constrains of a space project in conformance with ECSS-S-ST-00.

This Standard defines the quality assurance (QA) requirements for the establishment and implementation of a Quality Assurance
programme for products of space projects. Discipline related qualification activities are complemented in standards specific to those
disciplines (e.g. ECSS-E-ST-32-01 for fracture control).
For software quality assurance, the software product assurance standard, ECSS-Q-ST-80 is applicable.
This Standard is applicable to all space projects.
This standard may be tailo...view more

This European Standard provides recommendations and guidance on the quality assurance and quality control of earthworks construction forming part of general civil engineering and building works. It provides guidance on the techniques to be used to give clients, contractors and designers confidence that the earthworks have been constructed in accordance with their requirements.

This Technical Report defines statistics, terms and quality criteria for Web archiving. It considers the
needs and practices across a wide range of organisations such as libraries, archives, museums, research
centres and heritage foundations. The examples mentioned are taken from the library sector, because
libraries, especially national libraries, have taken up the new task of Web archiving in the context of
legal deposit. This should in no way be taken to undermine the important contributi...view more

IEC 61078:2016 this International Standard describes: - the requirements to apply when reliability block diagrams (RBDs) are used in dependability analysis; - the procedures for modelling the dependability of a system with reliability block diagrams; - how to use RBDs for qualitative and quantitative analysis; - the procedures for using the RBD model to calculate availability, failure frequency and reliability measures for different types of systems with constant (or time dependent) probabilitie...view more

This Standard specifies quality assurance and safety assurance requirements for space test centres, applicable to the test process, test personnel (both, of the customer and the space test centre), test facilities, test environment and any operations related to the test specimen under responsibility of the space test centre as requested by the customer.
This standard may be tailored for the specific characteristic and constraints of a space project in conformance with ECSS-S-ST-00.

IEC 61078:2016 this International Standard describes:
- the requirements to apply when reliability block diagrams (RBDs) are used in dependability analysis;
- the procedures for modelling the dependability of a system with reliability block diagrams;
- how to use RBDs for qualitative and quantitative analysis;
- the procedures for using the RBD model to calculate availability, failure frequency and reliability measures for different types of systems with constant (or time dependent) probabil...view more

This Technical Specification sets out guidance for the implementation of service excellence in order to create outstanding customer experiences, exceed customer expectations, and achieve customer delight. It does not focus on the provision of basic customer service which organizations should already have in place.
This document applies to all organizations delivering services such as commercial organizations, public services and not-for-profit organizations.

In the current competitive world, Quality of Service (QoS) is becoming, jointly with cost, a key indicator in selling and
buying telecommunications services. At the same time, technology and liberalization trends are raising new types of
concerns unknown with the Plain Old Telephony Services (POTS) using switched connections provided by a single
monopoly supplier.
Nowadays, there are several standards describing QoS measurements but the questions of which indicators are to be
monitored and ...view more

This Technical Specification sets out guidance for the implementation of service excellence in order to create outstanding customer experiences, exceed customer expectations and achieve customer delight. It does not focus on providing basic customer service which organizations should already have in place.
This document applies to all organizations delivering services, such as commercial organizations, public services and not-for-profit organizations.

This Technical Report specifies methods for measuring the quality of a re-forwarding service of domestic addressed mail that is collected, processed and delivered by postal service operators. As a European Standard or technical specification it relates to the measurement of services given to household and business customers who receive mail at their homes, their post office boxes, or at their office premises and have contracted their national Postal Operator (PO) to re-forward their mail for a d...view more

This part of ISO 3834 specifies the International Standards with which it is necessary to conform to
claim conformity to the quality requirements of ISO 3834‑2, ISO 3834‑3, or ISO 3834‑4. It can only be
used in conjunction with ISO 3834‑2, ISO 3834‑3, or ISO 3834‑4.

ISO 19157 establishes the principles for describing the quality of geographic data. It defines components for describing data quality; specifies components and content structure of a register for data quality measures; describes general procedures for evaluating the quality of geographic data; establishes principles for reporting data quality. This International Standard also defines a set of data quality measures for use in evaluating and reporting data quality. It is applicable to data produce...view more