33.160.40 - Video systems

IEC 61966-12-1:2020 is available as IEC 61966-12-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61966-12-1:2020 defines the colour gamut metadata scheme for video systems and similar applications. The metadata can be associated with wide-gamut video colour content or to a piece of equipment to display the content. When associated with content, the colour gamut metadata defines the...view more

This part of IEC 63005 describes test methods on evaluating performance of basic
functionalities of EVDR described in IEC 63005-1.

IEC 63005-2:2019 describes test methods on evaluating performance of basic functionalities of EVDR described in IEC 63005-1.

IEC 61897:2020 is available as IEC 61897:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61897:2020 applies to aeolian vibration dampers intended for single conductors or earth wires or conductor bundles where dampers are directly attached to each subconductor. The purchaser may adopt part(s) of this document when specifying requirements for cables different from those mentioned abov...view more

IEC 63005-2:2019 describes test methods on evaluating performance of basic functionalities of EVDR described in IEC 63005-1.

IEC TS 62871-2:2019 specifies implementation guidelines for mapping MPEG-2 video and AVC streams into MXF file format for professional tape-less camera recorders.
The guidelines are applicable to the creation of an MXF file in professional tape-less camera recorders. They are also applicable for content management software and to equipment that supports MXF files generated by professional tape-less camera recorders.

This Standard defines procedures for communication between network video clients and video transmitter devices. This new set of specifications makes it possible to build network video systems with devices and receivers from different manufacturers using common and well-defined interfaces. These interfaces cover functions such as media and imaging configuration, real-time streaming of audio and video, pan, tilt and zoom (PTZ) control as well as analytics. The management and control interfaces def...view more

This Standard specifies the web service interface for the configuration of the recording of video, audio and metadata. Additionally, associated events are defined. Clause 4 provides a definition of the storage model this document is based on. Web service usage is outside the scope of this document. Please refer to the IEC 60839-11- 31 for more information.

IEC 60076-21:2018 describes electrical, mechanical and test requirements of liquid-immersed, single- and three-phase, 50 Hz and 60 Hz, self and forced-air cooled, distribution, overhead and substation, step-voltage regulators, 1 000 kVA (single-phase units) or 3 000 kVA (three-phase units) and smaller, 34 500 volts and below (2 400 V minimum) and their associated controls. Requirements, references and definitions relevant to either IEC or IEEE contexts are given and their use is described in Cla...view more

IEC 62106-2:2018 defines the coding and definition of features for the Radio Data System (RDS).
IEC 62106-2:2018 together with IEC 62106-1, IEC 62106-3, IEC 62106-4, IEC 62106-5 and IEC 62106-6, cancels and replaces IEC 62106:2015, and constitutes a technical revision.
This edition includes the following significant technical changes with respect to IEC 62106:2015:
• Provision has been made to carry RDS on multiple data-streams (RDS2).
• Data in the additional data-streams is using a newly d...view more

IEC 62106-1:2018 defines the basic layer of the Radio Data System (RDS) intended for application to VHF/FM sound broadcasts in the range 64,0 MHz to 108,0 MHz, which can carry either stereophonic (pilot-tone system) or monophonic programmes (as stated in ITU‑R Recommendation BS.450-3 and ITU-R Recommendation BS.643-3).
IEC 62106-1:2018 together with IEC 62106-2, IEC 62106-3, IEC 62106-4, IEC 62106-5 and IEC 62106-6, cancels and replaces IEC 62106:2015, and constitutes a technical revision.
Thi...view more

Corrigendum to add supersession information: EN 62676-3 supersedes EN 50132-5-3

IEC 62106-6:2018 contains the technical specifications for Open Data Applications in the public domain. This document is maintained by the RDS Forum Office. The RDS Forum Office applies an easy procedure for registering new Open Data Applications, to ensure that they can be used without the need to change the RDS standard. The ODA feature permits defining new applications that can be decoded on a receiver. The receiver needs to the adequate software handler for the specific AID, which identifies...view more

IEC 62106-3:2018 defines the Open Data Application (ODA) feature of the Radio Data System (RDS). The ODA feature in essence allows raw data to be transmitted via a transparent data channel from a service provider to a suitably equipped receiver without there being any prior knowledge of the data content by the IEC 62106 standard. This document defines the method of packaging the data within the RDS group structure and the identification of the data (using the Application Identification, AID) suc...view more

IEC 62106-4:2018 provides a number of tables for use in the implementation of the RDS system. This document specifies the procedure for registering a new value in an existing table or the registration of a new table.
IEC 62106-4:2018 together with IEC 62106-1, IEC 62106-2, IEC 62106-3, IEC 62106-5 and IEC 62106-6, cancels and replaces IEC 62106:2015, and constitutes a technical revision.
This edition includes the following significant technical changes with respect to IEC 62106:2015:
• Provis...view more

IEC 62106-5:2018 defines receiver profiles and criteria that can be used for marking RDS receiver devices.
IEC 62106-5:2018 together with IEC 62106-1, IEC 62106-2, IEC 62106-3, IEC 62106-4 and IEC 62106-6, cancels and replaces IEC 62106:2015, and constitutes a technical revision.
This edition includes the following significant technical changes with respect to IEC 62106:2015:
• provision has been made to carry RDS on multiple data-streams (RDS2);
• a logo for RDS2 has been added,
• new are ...view more

This part of IEC 62676 defines recommendations and requirements for representation and
measuring methods of performance values to be described in materials such as instruction
manuals, brochures and specifications of video surveillance camera equipment.
This document consists of two parts. The first part is requirements for description of video
surveillance camera specification items. The second part is requirements for measurement
methods of video surveillance camera specification items.
...view more

IEC 62888-5:2018 specifies the conformance test arrangements for newly manufactured EMS (Energy management system) installed on a traction unit. This includes the integration conformance test and installation conformance test. In addition, this document also specifies the conformance test procedures for device and ancillary component replacement (e.g. due to damage in service), and periodic check to verify the EMS conformance test remains valid.

This part of IEC 63005 describes basic requirements for event video data recorders (EVDRs)
for road vehicle accidents, used for identifying and analysing causes of accidents based on
video from a front-mounted camera and other information obtained before and after such
events. In addition to video from a front-mounted camera and vehicle behaviour, these
products can record side and/or rear video data for enhanced functionalities in determining
causes of accidents and analysing collision eve...view more

IEC 63005-1:2017(E) describes basic requirements for event video data recorders (EVDRs) for road vehicle accidents, used for identifying and analysing causes of accidents based on video from a front-mounted camera and other information obtained before and after such events. In addition to video from a front-mounted camera and vehicle behaviour, these products can record side and/or rear video data for enhanced functionalities in determining causes of accidents and analysing collision events.