ISS EIT.EVL - Optical radiation safety and laser equipment

This part of EN 60825 provides requirements and specific guidance for the manufacture and safe use of laser products and systems used for point-to-point or point-to-multipoint free space optical data transmission. This standard only addresses the open beam portion of the system. If portions of the equipment or system incorporate optical fibre that extends from the confinements of the enclosure(s), the manufacturing and safety requirements under EN 60825-1 apply to those portions only. This stand...view more

2019-09-26: not to be offered for LVD citation, DOW extension

This part of IEC 62471 provides requirements regarding photobiological safety of the optical
radiation emitted by image projectors. This part of IEC 62471 does not deal with other
hazards such as electrical, mechanical or fire hazards.
This part of IEC 62471 provides requirements regarding:
• optical radiation safety assessment of image projectors;
• projector risk groups;
• testing conditions and measurement conditions;
• manufacturer’s requirements including user information.
The scope...view more

EN IEC 60825-1 is applicable to safety of laser products emitting laser radiation in the wavelength range 180 nm to 1 mm. Although lasers exist which emit at wavelengths less than 180 nm (within the vacuum ultraviolet), these are not included in the scope of the standard since the laser beam normally has to be enclosed in an evacuated enclosure, and, therefore, the potential optical radiation hazards are inherently minimal. A laser product may consist of a single laser with or without a separate...view more

Amandma A2:2011 je dodatek k standardu SIST EN 60825-4:2008.
This part of IEC 60825 specifies the requirements for laser guards, permanent and temporary (for example for service), that enclose the process zone of a laser processing machine, and specifications for proprietary laser guards. This standard applies to all component parts of a guard including clear (visibly transmitting) screens and viewing windows, panels, laser curtains and walls. Requirements for beam path components, beam stops a...view more

This International Standard applies to BASIC SAFETY and ESSENTIAL PERFORMANCE of equipment incorporating one or more sources of OPTICAL RADIATION in the wavelength range 200 nm to 3 000 nm, with the exception of laser radiation, and intended to create non-visual photobiological effects in humans or animals for therapeutic, diagnostic, monitoring, cosmetic/aesthetic or veterinary applications; hereafter referred to as light source equipment (LS EQUIPMENT).
This particular standard does not apply...view more

This part 2 of IEC 60825 provides requirements and specific guidance for the safe operation and maintenance of optical fibre communication systems (OFCS). In these systems optical power may be accessible outside the confinements of transmitting equipment or at great distance from the optical source. This standard requires the assessment of hazard levels at accessible locations as a replacement for classification according to IEC 60825-1. It applies to the complete installed end-to-end OFCS, incl...view more

This project will define which classes of laser products are considered acceptable to be made available on the Common Market in Europe as consumer products