This part of EN 60825 provides requirements and specific guidance for the manufacture and safe use of laser products and systems used for point-to-point or point-to-multipoint free space optical data transmission. This standard only addresses the open beam portion of the system. If portions of the equipment or system incorporate optical fibre that extends from the confinements of the enclosure(s), the manufacturing and safety requirements under EN 60825-1 apply to those portions only. This stand...view more

    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day

2019-09-26: not to be offered for LVD citation, DOW extension

    • sale 10% off
    • Corrigendum
      1 page
      English language
    • e-Library read for
      1 day

EN IEC 60825-1 is applicable to safety of laser products emitting laser radiation in the wavelength range 180 nm to 1 mm. Although lasers exist which emit at wavelengths less than 180 nm (within the vacuum ultraviolet), these are not included in the scope of the standard since the laser beam normally has to be enclosed in an evacuated enclosure, and, therefore, the potential optical radiation hazards are inherently minimal. A laser product may consist of a single laser with or without a separate...view more

    • sale 10% off
    • Standard
      117 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      108 pages
      English language
    • e-Library read for
      1 day

Amandma A2:2011 je dodatek k standardu SIST EN 60825-4:2008.
This part of IEC 60825 specifies the requirements for laser guards, permanent and temporary (for example for service), that enclose the process zone of a laser processing machine, and specifications for proprietary laser guards. This standard applies to all component parts of a guard including clear (visibly transmitting) screens and viewing windows, panels, laser curtains and walls. Requirements for beam path components, beam stops a...
view more

    • sale 10% off
    • Amendment
      9 pages
      English language
    • e-Library read for
      1 day

This part 2 of IEC 60825 provides requirements and specific guidance for the safe operation and maintenance of optical fibre communication systems (OFCS). In these systems optical power may be accessible outside the confinements of transmitting equipment or at great distance from the optical source. This standard requires the assessment of hazard levels at accessible locations as a replacement for classification according to IEC 60825-1. It applies to the complete installed end-to-end OFCS, incl...view more

    • sale 10% off
    • Amendment
      11 pages
      English language
    • e-Library read for
      1 day

This part of IEC 60825 specifies the requirements for laser guards, permanent and temporary (for example for service), that enclose the process zone of a laser processing machine, and specifications for proprietary laser guards. This standard applies to all component parts of a guard including clear (visibly transmitting) screens and viewing windows, panels, laser curtains and walls. Requirements for beam path components, beam stops and those other parts of a protective housing of a laser produc...view more

    • sale 10% off
    • Amendment
      15 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies procedures for the measurement or estimation and the assessment of personal exposures to ultraviolet radiation emitted by the sun. This European Standard applies to solar UV-exposures when staying outdoors. This European Standard is applicable to workers and to the general population. This European Standard does not apply to UV-exposures caused by artificial sources, e.g. UV-lamps, welding arcs. This European Standard does not apply to radiation exposures which c...view more

    • sale 10% off
    • Standard
      32 pages
      English language
    • e-Library read for
      1 day

This part of IEC 60825 specifies the requirements for laser guards, permanent and temporary (for example for service), that enclose the process zone of a laser processing machine, and specifications for proprietary laser guards. This standard applies to all component parts of a guard including clear (visibly transmitting) screens and viewing windows, panels, laser curtains and walls. Requirements for beam path components, beam stops and those other parts of a protective housing of a laser produc...view more

    • sale 10% off
    • Standard
      70 pages
      English language
    • e-Library read for
      1 day

Provides requirements and specific guidance for the safe operation and maintenance of optical fibre communication systems (OFCS). In these systems optical power may be accessible outside the confinements of transmitting equipment or at great distance from the optical source. This standard requires the assessment of hazard levels at accessible locations as a replacement for classification according to IEC 60825-1. It applies to the complete installed end-to-end OFCS, including its components and ...view more

    • sale 10% off
    • Amendment
      12 pages
      English language
    • e-Library read for
      1 day

This standard specifies the terminology and the quantities that are used in UV-, VIS- and IR-exposure measurements according to parts 1, 2 and 3 of EN 14255.
NOTE   Parts 1 and 2 were published in 2005, while part 3 is under preparation.
This standard can also be applied to the terminology and quantities used in international recommendations from, e.g. ICNIRP, CIE, etc. The purpose of this standard is to unify the definitions of quantities for optical radiation measurements since inconsistencies...
view more

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies procedures for the measurement and assessment of personal exposures to visible (VIS) and infrared (IR) radiation emitted by artificial sources, where adverse effects cannot be readily excluded.
NOTE 1   Adverse effects will normally not occur in exposures caused by normal lighting or room heating.
This European Standard applies to VIS- and IR- exposures in indoor and outdoor workplaces. It does not apply to VIS- and IR-exposures in leisure time.
This European St...
view more

    • sale 10% off
    • Standard
      53 pages
      English language
    • e-Library read for
      1 day

This document specifies procedures for the measurement and assessment of personal exposures to ultraviolet (UV) radiation emitted by artificial sources, where adverse effects can not readily be excluded.
NOTE 1   Adverse effects will usually not occur in exposures caused by commonly used artificial lighting. However, exposures to very strong light sources or light sources with extended spectra may cause a health risk nevertheless.
This document applies to UV-exposures in indoor and outdoor workp...
view more

    • sale 10% off
    • Standard
      32 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      32 pages
      English language
    • e-Library read for
      1 day

This part 2 of IEC 60825 provides requirements and specific guidance for the safe operation and maintenance of optical fibre communication systems (OFCS). In these systems optical power may be accessible outside the confinements of transmitting equipment or at great distance from the optical source. This standard requires the assessment of hazard levels at accessible locations as a replacement for classification according to IEC 60825-1. It applies to the complete installed end-to-end OFCS, incl...view more

    • sale 10% off
    • Standard
      52 pages
      English language
    • e-Library read for
      1 day

This part of EN 60825 provides requirements and specific guidance for the manufacture and safe use of laser products and systems used for point-to-point or point-to-multipoint free space optical data transmission. This standard only addresses the open beam portion of the system. If portions of the equipment or system incorporate optical fibre that extends from the confinements of the enclosure(s), the manufacturing and safety requirements under EN 60825-1 apply to those portions only. This stand...view more

    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day