25.140.10 - Pneumatic tools

This document specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held power-driven angle and vertical grinders. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine fitted with a specified test wheel and run under no‑load conditions. The method has been established for surface grinding tasks only. Cutting and sanding generally create lower vibrations. It is intended that the results be used ...view more

This document specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held power-driven angle and vertical grinders. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine fitted with a specified test wheel and run under no‑load conditions. The method has been established for surface grinding tasks only. Cutting and sanding generally create lower vibrations. It is intended that the results be used ...view more

2018-12-13 JF:Through Decision BT 177/2018, the BT approved the revised Annex ZA. CCMC will proceed with publication.
2017-08-28: publication on hold due to missing assessment
2018-03-23 JF: Annex ZA not in line with CEN Guide 414. CCMC is examining with the TC and the NAC  which actions are required
2018-07-02 JF: TC revised Annex ZA in line with the CEN Guide 414 and EC expectations. CCMC requested the Consutlant's assessment of the revised Annex ZA with the indicative deadline of 20...view more

This standard applies to hand-held non-electric power tools driven by rotary or linear motors, powered by compressed air, hydraulic fluid or internal combustion engines and intended to be used by one operator and supported by: - the operator's hand or hands or a suspension, e. g. a balancer. - hand-held tools which are intended to be capable of being fixtured.

ISO 11148-13:2017 specifies safety requirements for hand-held non-electric power tools (hereinafter referred to as "fastener driving tools") intended for installation of a fastener (see Annex B), forming a mechanical connection or attachment with the workpiece which are for example wood and wood-based materials, plastic materials, fibre materials (loose or compacted), cementitious materials, metals and combinations of these materials. The fastener driving tools for fasteners can be powered by co...view more

ISO 5393:2017 specifies a laboratory performance test method for power assembly tools (referred throughout the document as "tool") for installing threaded fasteners. ISO 5393:2017 provides a method for the measurement of torque repeatability (scatter) - over a range of torque rates as specified in this document, - over a range of torque adjustment as defined by the manufacturer, and - over a number of operating cycles as defined by the manufacturer. ISO 5393:2017 provides a method for the measur...view more

ISO 11148-13:2017 specifies safety requirements for hand-held non-electric power tools (hereinafter referred to as "fastener driving tools") intended for installation of a fastener (see Annex B), forming a mechanical connection or attachment with the workpiece which are for example wood and wood-based materials, plastic materials, fibre materials (loose or compacted), cementitious materials, metals and combinations of these materials. The fastener driving tools for fasteners can be powered by co...view more

2013-09-20 EMA: Draft for //ENQ received in ISO/CS (see notification of 2013-09-19 in dataservice).

2013-10-02 EMA: Draft for //ENQ received in ISO/CS (see notification of 2013-10-02 in dataservice).

This part of ISO 11148 applies to hand-held non-electric power tools (hereinafter “non-rotary percussive power tools”) intended for chipping, riveting, breaking of concrete and asphalt, ramming, etc. The non-rotary percussive power tool can be powered by compressed air, hydraulic fluid or internal combustion engines and is intended for use by one operator and supported by the operator’s hand or hands, with or without a suspension, e.g. a balancer.
This part of ISO 11148 covers
- breakers;
- b...view more

This part of ISO 11148 applies to hand-held non-electric power tools (hereinafter "assembly power tools for threaded fasteners") intended for tightening or installing of threaded fasteners. The assembly power tools for threaded fasteners can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer. This part of ISO 11148 covers - air-hydraulic ...view more

This part of ISO 11148 applies to hand-held non-electric power tools (hereinafter "drills and tappers") intended for rotary drilling of holes in all kinds of material, e.g. wood, metal, concrete and plastics, or for tapping and cleaning threads in metal and plastics. The drills and tappers can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a bal...view more

This part of ISO 11148 specifies safety requirements for hand-held non-electric power tools (hereinafter "circular, oscillating and reciprocating saws") intended for sawing. The circular, oscillating and reciprocating saws can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer. This part of ISO 11148 is applicable to - circular saws; -...view more