EN ISO 28927-5:2009/A1:2015
(Amendment)Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009/Amd 1:2015)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009/Amd 1:2015)
2013-10-02 EMA: Draft for //ENQ received in ISO/CS (see notification of 2013-10-02 in dataservice).
Handgehaltene motorbetriebene Maschinen - Messverfahren zur Ermittlung der Schwingungsemission - Teil 5: Bohrmaschinen und Schlagbohrmaschinen (ISO 28927-5:2009/Amd 1:2015)
Machines à moteur portatives - Méthodes d'essai pour l'évaluation de l'émission de vibrations - Partie 5: Perceuses et perceuses à percussion (ISO 28927-5:2009/Amd 1:2015)
Ročna prenosna električna orodja - Preskusne metode za vrednotenje oddajanja vibracij - 5. del: Vrtalniki in udarni (vibracijski) vrtalniki (ISO 28927-5:2009/Amd 1:2015)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 28927-5:2010/A1:2015
01-december-2015
5RþQDSUHQRVQDHOHNWULþQDRURGMD3UHVNXVQHPHWRGH]DYUHGQRWHQMHRGGDMDQMD
YLEUDFLMGHO 9UWDOQLNLLQXGDUQL YLEUDFLMVNL YUWDOQLNL ,62 $PG
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part
5: Drills and impact drills (ISO 28927-5:2009/Amd 1:2015)
Handgehaltene motorbetriebene Maschinen - Messverfahren zur Ermittlung der
Schwingungsemission - Teil 5: Bohrmaschinen und Schalgbohrmaschinen (ISO 28927-
5:2009/Amd 1:2015)
Machines à moteur portatives - Méthodes d'essai pour l'évaluation de l'émission de
vibrations - Partie 5 : Perceuses et perceuses à percussion (ISO 28927-5:2009/Amd
1:2015)
Ta slovenski standard je istoveten z: EN ISO 28927-5:2009/A1:2015
ICS:
13.160 Vpliv vibracij in udarcev na Vibration and shock with
ljudi respect to human beings
25.140.01 5RþQDRURGMDQDVSORãQR Hand-held tools in general
SIST EN ISO 28927-5:2010/A1:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 28927-5:2010/A1:2015
---------------------- Page: 2 ----------------------
SIST EN ISO 28927-5:2010/A1:2015
EN ISO 28927-5:2009/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2015
EUROPÄISCHE NORM
ICS 13.160; 25.140.10
English Version
Hand-held portable power tools - Test methods for
evaluation of vibration emission - Part 5: Drills and impact
drills (ISO 28927-5:2009/Amd 1:2015)
Machines à moteur portatives - Méthodes d'essai pour Handgehaltene motorbetriebene Maschinen -
l'évaluation de l'émission de vibrations - Partie 5: Messverfahren zur Ermittlung der
Perceuses et perceuses à percussion (ISO 28927- Schwingungsemission - Teil 5: Bohrmaschinen und
5:2009/Amd 1:2015) Schlagbohrmaschinen (ISO 28927-5:2009/Amd
1:2015)
This amendment A1 modifies the European Standard EN ISO 28927-5:2009; it was approved by CEN on 6 June 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 28927-5:2009/A1:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 28927-5:2010/A1:2015
EN ISO 28927-5:2009/A1:2015 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 28927-5:2010/A1:2015
EN ISO 28927-5:2009/A1:2015 (E)
European foreword
This document (EN ISO 28927-5:2009/A1:2015) has been prepared by Technical Committee
ISO/TC 118 "Compressors and pneumatic tools, machines and equipment" in collaboration with
Technical Committee CEN/TC 231 “Mechanical vibration and shock” the secretariat of which is held by
DIN.
This Amendment to the European Standard EN ISO 28927-5:2009 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by March 2016, and
conflicting national standards shall be withdrawn at the latest by March 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
According to the CEN-CENELEC Internal Regulations, the national standards organizations of th
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.