This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This European Standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected.
This part of EN 50632 applies to hammers.

    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day

IEC 62841-4-4:2020 This document applies to hand-held and walk-behind lawn trimmers and lawn edge trimmers, used by a standing operator for cutting grass, weeds or similar soft vegetation, and grass trimmers, brush cutters and brush saws used by a standing operator for cutting grass, weeds, brush, bushes, saplings and similar vegetation.
This document does not apply to
– hand-held machines having a mass of 18 kg or greater;
– self-propelled lawn trimmers or lawn edge trimmers;
– scissors typ...
view more

    • sale 15% off
    • Standard
      237 pages
      English and French language

This part of IEC 62841 applies to hand-held hammers.
Tools covered by this document include percussion hammers and rotary hammers,
including rotary hammers with the capability to rotate only with the percussion system
disengaged (drill only mode).
This document does not apply to drills and impact drills.
NOTE 101 Drills and impact drills are covered by IEC 62841-2-1.
This document does not apply to tools that are designed exclusively for driving fasteners,
such as palm nailers.

    • sale 10% off
    • Standard
      60 pages
      English language
    • e-Library read for
      1 day

2019-07-05: to be launched to the enquiry together with pr = 70011 (SV)
2019-07-05: Represents common mods. to EN 62841-2-6 (PR=70011)

    • sale 10% off
    • Amendment
      8 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      7 pages
      English language
    • e-Library read for
      1 day

This document specifies the dimensions and technical requirements for ratcheting wrenches used in assembly or disassembly of hexagonal and double hexagonal fasteners. NOTE The wrenches covered by this document are the ones identified in ISO 1703 under reference No.1 1 01 07 0, 1 1 01 08 0, 1 1 01 09 0 and 1 1 02 19 0, 1 1 02 20 0. NOTE The wrenches according to this document are not intended for uses with impact stress of the wrench.

    • sale 15% off
    • Standard
      11 pages
      English language
    • sale 15% off
    • Standard
      11 pages
      French language
    • sale 15% off
    • Draft
      11 pages
      English language

IEC 62841-2-6:2020 Tools covered by this document include percussion hammers and rotary hammers, including rotary hammers with the capability to rotate only with the percussion system disengaged (drill only mode).
The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools.
This document does not apply to drills and impact drills.
This document does not apply to tools that are designed exclusively for driving fasteners, such as palm naile...
view more

    • sale 15% off
    • Standard
      118 pages
      English and French language

DOW=DOR+48 months is applied to all parts in EN IEC 62841 series
2018-11-02: this prA covers common mods to prEN IEC 62841-3-9 (PR=67950)

    • sale 10% off
    • Amendment
      9 pages
      English language
    • e-Library read for
      1 day

This part of IEC 62841 applies to transportable mitre saws intended to be used with a
toothed saw blade for cutting wood and analogous materials, plastics and nonferrous metals
except magnesium with a saw blade diameter not exceeding 410 mm, which hereinafter might
simply be referred to as saw or tool.
This International Standard does not apply to mitre saws intended to cut other metals, such
as magnesium, steel and iron. This document does not apply to mitre saws with an automatic
feeding...
view more

    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day

TAN - // IEC Corrigendum

    • sale 10% off
    • Corrigendum
      3 pages
      English and French language
    • e-Library read for
      1 day

IEC 62841-3-7:2020 This document applies to transportable wall saws guided by a track guiding system intended for dry cutting or to be connected to a liquid system for cutting concrete, stone or similar material by means of a diamond wheel. The rated speed of the diamond wheel does not exceed a peripheral speed of 100 m/s at rated capacity.
The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools.
This document does not apply to transpo...
view more

    • sale 15% off
    • Standard
      58 pages
      English and French language

2020-01-06 JF: the Annex ZZ which had been approved by  the BT is not the most recent one -> need to submit the correct Annex ZZ to the BT. The BT document under preparation.
2019-11-05 JF: Through the BT decision D163/C100, the BT approved the revised Annex ZZ of the standard. Standard under publlication.
NEXT ACTION: CCMC ACTION BY 2019-08-30: submission of the revised Annex ZZ for the BT approval.
Compliant assessment of the Annex ZA received.
2019-05-08 JF: HAS Consultants confir...
view more

    • sale 10% off
    • Amendment
      9 pages
      English language
    • e-Library read for
      1 day

Next steps: the formal vote of the European Amendment
2019-08-08 JF: The Annex ZZ was delivered after the Enquiry started. The need to adapt the Annex ZZ.

    • sale 10% off
    • Amendment
      6 pages
      English language
    • e-Library read for
      1 day

IEC 62841-2-3:2020: applies to hand-held grinders, disc-type polishers and disc-type sanders, including angle, straight and vertical tools, intended for use on various materials except magnesium, with a rated capacity not exceeding 230 mm. For grinders, the rated no-load speed does not exceed a peripheral speed of the accessory of 80 m/s at rated capacity.
This standard does not apply to dedicated cut-off machines.
This standard does not apply to orbital polishers and orbital sanders.
This st...
view more

    • sale 15% off
    • Standard
      140 pages
      English and French language

EN-IEC 62841-4-1 applies to chain saws for cutting wood and designed for use by one person. This standard does not cover chain saws designed for use in conjunction with a guide-plate and riving knife or in any other way such as with a support or as a stationary or transportable machine. This standard does not apply to - chain saws for tree service as defined in ISO 11681-2; or - pole-mounted pruners. The chain saws covered by this standard are designed only to be operated with the right hand on ...view more

    • sale 10% off
    • Standard
      68 pages
      English language
    • e-Library read for
      1 day

Next steps: the formal vote of the European Amendment
2019-08-08 JF: The Annex ZZ was delivered after the Enquiry started. The need to adapt the Annex ZZ.

    • sale 10% off
    • Amendment
      6 pages
      English language
    • e-Library read for
      1 day

IEC 62841-4-1:2017 applies to chain saws for cutting wood and designed for use by one person. This standard does not cover chain saws designed for use in conjunction with a guide-plate and riving knife or in any other way such as with a support or as a stationary or transportable machine. This standard does not apply to chain saws for tree service as defined in ISO 11681-2; or pole-mounted pruners. Pole-mounted pruners will be covered by a future part of IEC 62841. The chain saws covered by this...view more

    • sale 10% off
    • Standard
      68 pages
      English language
    • e-Library read for
      1 day

2020-12-01: common mod - no xml
2018-11-02: this prA covers common mods to EN 62841-3-4:2016/prA1:2018 (pr=67898)

    • sale 10% off
    • Amendment
      6 pages
      English language
    • e-Library read for
      1 day

IEC 62841-3-9:2020 is available as IEC 62841-3-9:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62841-3-9:2020 applies to transportable mitre saws intended to be used with a toothed saw blade for cutting wood and analogous materials, plastics and nonferrous metals except magnesium with a saw blade diameter not exceeding 410 mm, which hereinafter might simply be referred to as saw or too...view more

    • sale 15% off
    • Standard
      75 pages
      English and French language

This Standard specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held power-driven angle and vertical grinders. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine fitted with a specified test wheel and run under no-load conditions. The method has been established for surface grinding tasks only. Cutting and sanding generally create lower vibrations. It is intended that the results be used ...view more

    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      33 pages
      English language
    • e-Library read for
      1 day