25.180.01 - Industrial furnaces in general

ISO 13578:2017 specifies the general safety requirements for electric arc furnaces (EAF) to melt steel not containing radioactive material. NOTE Radioactive material is considered to be detected in front of the steel plant entrance. ISO 13578:2017 deals with significant hazards, hazardous situations and events as listed in Table 1 pertinent to EAF, when used as intended and under conditions foreseen by the manufacturer, and also includes foreseeable faults and malfunctions in case of misuse. ISO...view more

ISO 13579-11:2017 specifies classifications and designations in the methodology of energy efficiency evaluation of industrial furnaces and associated processing equipment (TPE), including energy efficiency in terms of exergy as well as enthalpy. ISO 13579-11:2017does not apply to the following types of TPE: - blast furnaces, basic oxygen furnaces, coke ovens; - furnaces that generate gases to be used as fuel (including by-product gases); - special atmosphere gas generators; - industrial furnaces...view more

ISO 13577-3:2016 specifies safety requirements for generation and use of protective and reactive atmosphere gases that are part of industrial thermo-processing equipment (TPE). NOTE The general safety requirements common to TPE are provided in ISO 13577‑1 (see Introduction). ISO 13577-3:2016 deals with significant hazards, hazardous situations and events relevant to the generation and use of protective and reactive atmosphere gases created by thermochemical reactions and their use in TPE that ar...view more

ISO 13577-1:2016 the general safety requirements common to industrial furnaces and associated processing equipment (TPE). ISO 13577-1:2016 deals with the significant hazards, hazardous situations or hazardous events relevant to TPE, as listed in Annex A, when TPE is used as intended and also under conditions of misuse that are reasonably foreseeable by the manufacturer. Annex B provides a list of common industrial furnaces and associated processing equipment. This document specifies the requirem...view more

The Standard defines safety measures for ovens and dryers in which flammable substances are released by evaporation from and curing of coating materials.

This European Standard deals with all significant hazards, hazardous situations and hazardous events relevant to ovens and dryers in which flammable substances are released by evaporation from and curing of coating materials.
The specific significant risks related to the use of this machinery with foodstuff and pharmaceutical products are not dealt with in this European Standard.
This European Standard is only applicable to machines which are used as intended and under the conditions which are...view more

ISO 13574:2015 establishes the vocabulary for all industrial furnaces and associated processing equipment (TPE). It provides terms and definitions which are intended to be applied to the following documents: - ISO 13577 (all parts); - ISO 13579 (all parts).

ISO 13577-2:2014 specifies the safety requirements for combustion and fuel handling systems that are part of industrial furnaces and associated processing equipment (TPE). It deals with significant hazards, hazardous situations and events relevant to combustion and fuel handling systems, when used as intended and under the conditions foreseen by the manufacturer. ISO 13577-2:2014 covers: fuel pipework downstream of and including the manual isolating valve; combustion air supply (including oxygen...view more

ISO 13577-4:2014 specifies the requirements for protective systems used in industrial furnaces and associated processing equipment (TPE). The functional requirements to which the protective systems apply are specified in the other parts of ISO 13577.

ISO 13579-3:2013 specifies general methodology for measuring energy balance and calculating the efficiency of the process involving batch-type aluminium melting furnaces as designed by furnace manufacturers. This general methodology includes measurement methods, calculations (general calculation) and energy balance and efficiency calculation evaluation report. ISO 13579-3:2013 is not applicable to any efficiencies related to the process itself outside of batch-type aluminium melting furnaces.

ISO 13579-4:2013 specifies general methodology for measuring energy balance and calculating the efficiency of the process involving furnaces with protective or reactive atmosphere as designed by the furnace manufacturers. This general methodology includes measurement methods, calculations (general calculation), and evaluation report. part of ISO 13579-4:2013 is not applicable to any efficiencies related to the process itself outside of furnaces with protective or reactive atmosphere.

ISO 13579-1:2013 specifies a general methodology for measuring energy balance and calculating the efficiency of the process involving industrial furnaces and associated processing equipment as designed by furnace manufacturers. This general methodology includes measurement methods, calculations (general calculation) and an energy balance evaluation report. ISO 13579-1:2013 is not applicable to any efficiencies related to the process itself outside of industrial furnaces and associated processing...view more

ISO 13579-2:2013 specifies a general methodology for measuring energy balance and calculating the efficiency of the process involving reheating furnaces for steel as designed by furnace manufacturers. This general methodology includes measurement methods, calculations (general calculation) and energy balance and efficiency calculation evaluation report. ISO 13579-2:2013 is not applicable to any efficiencies related to the process itself outside of reheating furnaces for steel.

This part of EN 746 together with EN 746-1 specifies safety requirements for single and multiple burners that are part of Industrial Thermoprocessing Equipment. (In this standard referred to as IThE). This document deals with significant hazards, hazardous situations and events relevant to combustion and fuel handling systems that are part of IThE as listed in Clause 4, when used as intended and under the conditions foreseen by the manufacturer. This European Standard covers:
- fuel pipework do...view more

This part of EN 746 together with EN 746-1 specifies safety requirements for single and multiple burners that are part of Industrial Thermoprocessing Equipment. (In this standard referred to as IThE).
This document deals with significant hazards, hazardous situations and events relevant to combustion and fuel handling systems that are part of IThE as listed in Clause 4, when used as intended and under the conditions foreseen by the manufacturer.
This European Standard covers:
- fuel pipework ...view more

1.1   This part of EN 746 specifies common safety requirements for industrial thermoprocessing equipment (for example industrial furnaces and industrial heating equipment), which meets the definition for machinery given in EN ISO 12100-1:2003.
It details the anticipated significant hazards associated with industrial thermoprocessing equipment and specifies the appropriate preventative measures for reduction or elimination of these hazards.
This standard gives general principles and common requir...view more

1.1   This part of EN 746 specifies common safety requirements for industrial thermoprocessing equipment (for example industrial furnaces and industrial heating equipment), which meets the definition for machinery given in EN ISO 12100-1:2003.
It details the anticipated significant hazards associated with industrial thermoprocessing equipment and specifies the appropriate preventative measures for reduction or elimination of these hazards.
This standard gives general principles and common requir...view more

This noise test code specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration and verification of the noise emission characteristics of industrial thermoprocessing equipment as described especially in EN 746-1, EN 746-2 and EN 746-3. It also indicates the location of work stations where measurements need to be made.
Noise emission characteristics include emission sound pressure levels at work stations and the sound power l...view more

This part of EN 746 specifies safety requirements for atmosphere gas systems and their use in industrial thermo-processing equipment and associated plant, including systems for the production of atmosphere gases by reaction inside the thermo-processing equipment.
It applies to the supply of atmosphere gases, gaseous and liquid additions to, and their removal from industrial thermo-processing equipment and associated plant, confined to equipment integrated in the thermo-processing and associated...view more

This part of EN 746 specifies safety requirements for atmosphere gas systems and their use in industrial thermo-processing equipment and associated plant, including systems for the production of atmosphere gases by reaction inside the thermo-processing equipment.
It applies to the supply of atmosphere gases, gaseous and liquid additions to, and their removal from industrial thermo-processing equipment and associated plant, confined to equipment integrated in the thermo-processing and associated...view more