29.140.50 - Lighting installation systems
ICS 29.140.50 Details
Lighting installation systems
Lichtschienensysteme
Installations d'eclairage
Instalacijski sistemi za razsvetljavo
General Information
IEC TS 63117:2021(E) specifies the safety requirements of lighting systems at the system level, applicable when designing a lighting system.
A lighting system comprises a set of products. Safety requirements of the products are not covered in this document, but specified in product safety standards.
NOTE For emergency lighting systems, national or regional regulations provide relevant information that can be firstly consulted.
This document specifies safety requirements for lighting systems based on specific networks.
This document does not cover cyber-security and information security of lighting systems.
This document does not apply to lighting systems to be installed in potential explosive atmospheres which are under the scope of IEC TC 31.
For lighting systems based on an information and communication technology (ICT) network, refer to IEC 62949. For lighting systems based on a home and building electronic system and building automation and control system (HBES/BACS) network, refer to IEC 63044-3.
- Technical specification17 pagesEnglish languagesale 15% off
IEC TS 63116:2021(E) specifies general requirements for design, installation and maintenance of a lighting system.
A lighting system comprises a set of products. Requirements of the products are specified in product standards. For the general requirements of lighting systems, this document prevails.
Construction of lighting systems can vary in applications. This document is not intended to provide detailed technical specifications for the construction of lighting systems but to specify requirements in general that are necessary for lighting systems.
- Technical specification10 pagesEnglish languagesale 15% off
This document applies to plugs and receptacles for single or multiple pole connecting devices
used for aeronautical ground lighting applications.
Additional requirements and usage of connecting devices are given in different parts of
IEC 61820 series.
Connecting devices complying with this document are suitable for use in environmental class
E11 according to IEC 61820-1.
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 63067:2020 applies to plugs and receptacles for single or multiple pole connecting devices used for aeronautical ground lighting applications.
Additional requirements and usage of connecting devices are given in different parts of IEC 61820 series.
Connecting devices complying with this document are suitable for use in environmental class E11 according to IEC 61820-1.
- Standard45 pagesEnglish and French languagesale 15% off
IEC 62386-105:2020 applies to control gear and control devices. Typically, a bus unit according to IEC 62386 (all parts) contains firmware. There are circumstances where it might be necessary to change the firmware after production or shipping of the product. For example if the bus unit does not operate as intended. In such a case, a firmware update of a bus unit via the interface is beneficial. This firmware update process is primarily designed to be a bug fix process, not a feature extension process. Nevertheless the firmware update process can be used for feature extensions. But it is important that the risk of negative effects to the complete system is considered in detail.
- Standard27 pagesEnglish languagesale 10% offe-Library read for1 day
NEXT ACTION: PUBLICATION EXPECTED BY 2020-04
- Amendment13 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62386-105:2020 applies to control gear and control devices.
Typically, a bus unit according to IEC 62386 (all parts) contains firmware. There are circumstances where it might be necessary to change the firmware after production or shipping of the product. For example if the bus unit does not operate as intended. In such a case, a firmware update of a bus unit via the interface is beneficial.
This firmware update process is primarily designed to be a bug fix process, not a feature extension process. Nevertheless the firmware update process can be used for feature extensions. But it is important that the risk of negative effects to the complete system is considered in detail.
- Standard51 pagesEnglish and French languagesale 15% off
- Corrigendum7 pagesEnglish and French languagesale 10% offe-Library read for1 day
This document specifies the analogue control interface of controlgear which has the function
of controlling the output of the controlgear. The output of the controlgear is controlled
between minimum/off and maximum values by the voltage control device sinking the
controlgear current source.
This document does not specify safety requirements for the analogue interface of controlgear.
Safety requirements are given in IEC 61347 (all parts).
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
This part of IEC 61820 covers principles of design and installation requirements for AGL
systems including control, monitoring and transformation of energy, the cables and any
electrical component utilized to produce the light intended to be used as a visual aid for air
and ground navigation.
This document defines in general the fundamental principles to provide safe, reliable and
efficient operation of AGL systems independent of the particular system design. Where certain
aspects of design are specific to a particular type of system (e.g. series-circuit), these are
supplemented in the applicable part.
NOTE Local / national regulations can be different from the provisions of this document.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 63146:2019 establishes requirements for specification sheets relating to light emitting diode (LED) packages designed for the emission of white light for general lighting applications. This document does not contain compliance criteria.
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
The IEC 62386 series specifies a bus system for control by digital signals of electronic lighting
equipment. This part of IEC 62386 applies to a system with wireless or alternative wired
communication between its units, instead of a wired bus system, where the meaning of
“wireless or alternative wired communication”, or in short “telecommunication”, is any type of
communication network different from the wired system described in IEC 62386-101.
Where the electronic lighting equipment is covered by the scope of IEC 61347 (all parts), it is
in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies.
NOTE the definition of “telecommunication” applies only to this document and differs from the IEC Electropedia
term in IEC 60050-701:1988, 701-01-05.
- Standard54 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62386-104:2019 The IEC 62386 series specifies a bus system for control by digital signals of electronic lighting equipment. This part of IEC 62386 applies to a system with wireless or alternative wired communication between its units, instead of a wired bus system, where the meaning of “wireless or alternative wired communication”, or in short “telecommunication”, is any type of communication network different from the wired system described in IEC 62386-101. Where the electronic lighting equipment is covered by the scope of IEC 61347 (all parts), it is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies.
- Standard54 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 61820-1:2019 covers principles of design and installation requirements for AGL systems including control, monitoring and transformation of energy, the cables and any electrical component utilized to produce the light intended to be used as a visual aid for air and ground navigation. This document defines in general the fundamental principles to provide safe, reliable and efficient operation of AGL systems independent of the particular system design. Where certain aspects of design are specific to a particular type of system (e.g. series-circuit), these are supplemented in the applicable part.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62386-104:2019 The IEC 62386 series specifies a bus system for control by digital signals of electronic lighting equipment. This part of IEC 62386 applies to a system with wireless or alternative wired communication between its units, instead of a wired bus system, where the meaning of “wireless or alternative wired communication”, or in short “telecommunication”, is any type of communication network different from the wired system described in IEC 62386-101.
Where the electronic lighting equipment is covered by the scope of IEC 61347 (all parts), it is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies.
- Standard104 pagesEnglish and French languagesale 15% off
2019-10-24 PeC: to revisit after SLR is published
- Amendment23 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 61820-1:2019 covers principles of design and installation requirements for AGL systems including control, monitoring and transformation of energy, the cables and any electrical component utilized to produce the light intended to be used as a visual aid for air and ground navigation. This document defines in general the fundamental principles to provide safe, reliable and efficient operation of AGL systems independent of the particular system design. Where certain aspects of design are specific to a particular type of system (e.g. series-circuit), these are supplemented in the applicable part.
- Standard33 pagesEnglish and French languagesale 15% off
This part of IEC 62386 specifies a bus system for control by digital signals of electronic
lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the
addition of DC supplies.
This document is applicable to control gear supporting centrally supplied emergency operation
as described in EN 50171.
This document does not apply to self-contained emergency lighting control gear. These types
of control gear are specified in IEC 62386-202.
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62386-220:2019 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies. This document is applicable to control gear supporting centrally supplied emergency operation as described in EN 50171. This document does not apply to self-contained emergency lighting control gear. These types of control gear are specified in IEC 62386-202.
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62386-220:2019 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies.
This document is applicable to control gear supporting centrally supplied emergency operation as described in EN 50171.
This document does not apply to self-contained emergency lighting control gear. These types of control gear are specified in IEC 62386-202.
- Standard51 pagesEnglish and French languagesale 15% off
- Amendment26 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment26 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment26 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment26 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62386-221:2018 specifies the methodology of demand response which focuses on the curtailment of electric loads during peak demand times thus avoiding the requirement to find new sources of generation capacity. By using load shedding, the lighting system responds to the demands of the energy supply.
This document is applicable to control gear supporting the demand response functionality.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
This publication also bears the number QC 480301XX0005 which is the specification number in the IEC Quality Assessment System for Electronic Components (IECQ).
- Standard46 pagesEnglish and French languagesale 15% off
IEC 62386-221:2018 specifies the methodology of demand response which focuses on the curtailment of electric loads during peak demand times thus avoiding the requirement to find new sources of generation capacity. By using load shedding, the lighting system responds to the demands of the energy supply. This document is applicable to control gear supporting the demand response functionality.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard45 pagesEnglish and French languagesale 15% off
- Amendment14 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment14 pagesEnglish languagesale 10% offe-Library read for1 day
This part of IEC 62386 specifies a bus system for control by digital signals of electronic
lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the
addition of DC supplies.
This document is only applicable to IEC 62386-102:2014 and IEC 62386-102:2014/AMD1:—
control gear that implements load referencing.
NOTE Requirements for testing individual products during production are not included.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62386-216:2018 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62386-221:2018 specifies the methodology of demand response which focuses on the curtailment of electric loads during peak demand times thus avoiding the requirement to find new sources of generation capacity. By using load shedding, the lighting system responds to the demands of the energy supply.
This document is applicable to control gear supporting the demand response functionality.
- Standard30 pagesEnglish and French languagesale 15% off
This part of IEC 62386 specifies a bus system for control by digital signals of electronic
ligthing equipment which is in line with the requirements of IEC 61347 (all parts), with the
addition of DC supplies.
This document is only applicable to IEC 62386-102:2014 and IEC 62386-102:2014/AMD1:—
control gear associated with LED modules.
NOTE Requirements for testing individual products during production are not included.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
This part of IEC 62386 specifies a bus system for control by digital signals of electronic
lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the
addition of DC supplies.
This document is only applicable to IEC 62386-102:2014 and IEC 62386-102:2014/AMD1:—
control gear with non-replaceable light source.
NOTE Requirements for testing individual products during production are not included.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
This part of IEC 62386 specifies a bus system for control by digital signals of electronic
lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the
addition of DC supplies.
This document is only applicable to IEC 62386-102:2014 and IEC 62386-102:2014/AMD1:—
control gear that implements thermal lamp protection.
NOTE Requirements for testing individual products during production are not included.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
This part of IEC 62386 specifies a bus system for control by digital signals of electronic
lighting equipment which is in line with the requirements of IEC 61347 (all parts).
This document is applicable to IEC 62386-103:2014 and IEC 62386-103:2014/AMD1:—
control devices supporting manual configuration.
NOTE Requirements for testing individual products during production are not included.
- Standard27 pagesEnglish languagesale 10% offe-Library read for1 day
This part of IEC 62386 specifies a bus system for control by digital signals of electronic
lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the
addition of DC supplies.
This document is only applicable to IEC 62386-102:2014 and IEC 62386-102:2014/AMD1:—
control gear that implements dimming curve selection.
NOTE Requirements for testing individual products during production are not included.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
2018-09-14 PeC: Cited under the LVD in C 326/02
20180129: BT decision D139/C142 for implementation dates
- Amendment8 pagesEnglish languagesale 10% offe-Library read for1 day
This part of IEC 62386 specifies a bus system for control by digital signals of electronic
lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the
addition of DC supplies.
This document is only applicable to IEC 62386-102:2014 and IEC 62386-102:2014/AMD1:—
control gear that implements thermal gear protection.
NOTE Requirements for testing individual products during production are not included.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62386-222:2018 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62386-207:2018 specifies a bus system for control by digital signals of electronic ligthing equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: fast fade time has been redefined; short circuit and open circuit have been deleted; physical selection has been deleted; dimming curve selection has been moved to a separate part; load increase, load decrease and reference measurement have been moved to a separate part; thermal gear and lamp protection have been moved to separate parts; LED module integrated has been moved to a separate part; link to IEC 62386-102 error bits has been clarified; the following commands have been deleted: ENABLE CURRENT PROTECTOR DISABLE CURRENT PROTECTOR QUERY POSSIBLE OPERATING MODES QUERY SHORT CIRCUIT QUERY OPEN CIRCUIT QUERY CURRENT PROTECTOR ACTIVE QUERY CURRENT PROTECTOR ENABLED QUERY OPERATING MODE
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62386-333:2018(E) specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347 (all parts).
- Standard27 pagesEnglish languagesale 10% offe-Library read for1 day
Defines how to apply the principles and requirements given in IEC 61739 to monolithic integrated circuits. The standard is applicable to those manufacturers of integrated circuits (ICs) who apply for manufacturing line approval.[
]The objective is to establish consistency in the requirements used by manufacturers and auditors for techniques related to integrated circuit manufacturing.[
]Each manufacturer may use his own methods for satisfying the requirements of this standard, provided that the required level of control in the manufacturing line is reached.
- Standard22 pagesEnglish and French languagesale 15% off
IEC 62386-217:2018 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62386-224:2018 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62386-218:2018 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62386-216:2018 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies.
- Standard28 pagesEnglish and French languagesale 15% off
IEC 62386-207:2018 specifies a bus system for control by digital signals of electronic ligthing equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies.
This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
fast fade time has been redefined;
short circuit and open circuit have been deleted;
physical selection has been deleted;
dimming curve selection has been moved to a separate part;
load increase, load decrease and reference measurement have been moved to a separate part;
thermal gear and lamp protection have been moved to separate parts;
LED module integrated has been moved to a separate part;
link to IEC 62386-102 error bits has been clarified;
the following commands have been deleted:
ENABLE CURRENT PROTECTOR
DISABLE CURRENT PROTECTOR
QUERY POSSIBLE OPERATING MODES
QUERY SHORT CIRCUIT
QUERY OPEN CIRCUIT
QUERY CURRENT PROTECTOR ACTIVE
QUERY CURRENT PROTECTOR ENABLED
QUERY OPERATING MODE
- Standard41 pagesEnglish and French languagesale 15% off
IEC 62386-222:2018 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies.
- Standard29 pagesEnglish and French languagesale 15% off