29.140 - Lamps and related equipment

IEC 61228:2020 is available as IEC 61228:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61228:2020 describes the method of measuring, evaluating and specifying the UV irradiation characteristics of fluorescent ultraviolet lamps that are used in appliances for tanning purposes. It includes specific requirements regarding the marking of such lamps. This third edition cancels and replaces...view more

IEC PAS 63228:2020(E) This Book 12 defines LED Arrays with a rectangular shape and a circular light emitting surface. For each LED Array, this Book 12 also defines the mechanical interface between the LED Array and the corresponding Holder. The mechanical interface between the Holder and the Luminaire (e.g. outline, OCA and mounting holes) is defined in [Book-10]. This Book 1 defines the common concepts that underlie the Zhaga interface specifications. In addition, this Book 1 specifies general ...view more

IEC PAS 63324:2020(E) This Book 10 defines interfaces between LED Modules, associate components (Holders) and luminaires. Not all interface descriptions are applicable to LED Modules or Holders, but where applicable they are identical. This Book 1 defines the common concepts that underlie the Zhaga interface specifications. In addition, this Book 1 specifies general requirements for Zhaga compliant components of LED Luminaires.

IEC PAS 63329:2020(E) This Book 14 defines three socketable LED Light Engines (with integrated Electronic Control Gears) and three socketable LED Modules (without integrated Electronic Control Gears). These LED Modules and LLEs have a rectangular shape and are typically applied in general lighting applications. These products are intended to be installed and replaced by professionals and non-professionals. This Book 1 defines the common concepts that underlie the Zhaga interface specifications. ...view more

IEC 63046:2020 provides requirements and recommendations for the overall Electrical Power System. In particular, it covers interruptible and uninterruptible Electrical Power Systems including the systems supplying the I&C systems; This document is consistent and coherent with IEC 61513. Like IEC 61513, this document also highlights the need for complete and precise requirements, derived from the plant safety goals. Those requirements are prerequisites for generating the comprehensive requirement...view more

This document specifies methods of measurement of electrical power consumption in nonactive
mode(s), as applicable for electrical lighting equipment. This includes electrical lighting
equipment incorporating non-illumination components.
This document specifies neither performance requirements nor limits on power consumption.
This document applies to lighting equipment connected to a supply voltage up to 1 500 V DC
or up to 1 000 V AC.
This document is intended to be referenced by lighting ...view more

This document applies to plugs and receptacles for single or multiple pole connecting devices
used for aeronautical ground lighting applications.
Additional requirements and usage of connecting devices are given in different parts of
IEC 61820 series.
Connecting devices complying with this document are suitable for use in environmental class
E11 according to IEC 61820-1.

IEC 60598-1:2020 is available as IEC 60598-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60598-1:2020 specifies general requirements for luminaires, incorporating electric light sources for operation from supply voltages up to 1 000 V. The requirements and related tests of this document cover: classification, marking, mechanical construction, electrical construction and photobiologi...view more

IEC 62868-2-2:2020 specifies the safety requirements for integrated organic light-emitting diode (OLED) modules for use on ripple free DC supplies up to 1000 V or AC supplies up to 1 000 V RMS at 50 Hz or 60Hz.

IEC 62868-2-1:2020 specifies safety requirements for semi-integrated organic light emitting diode modules operating with an external controlgear connected to the mains voltage, and which, in addition, have a control means inside ("semi-integrated") for operation under constant voltage, constant current or constant power and have a rated voltage up to 120 V ripple free DC or 50 V AC RMS at 50 Hz or 60 Hz.

IEC 63103:2020(E) specifies methods of measurement of electrical power consumption in non-active mode(s), as applicable for electrical lighting equipment. This includes electrical lighting equipment incorporating non-illumination components.
This document specifies neither performance requirements nor limits on power consumption.
This document applies to lighting equipment connected to a supply voltage up to 1 500 V DC or up to 1 000 V AC.
This document is intended to be referenced by lightin...view more

This document specifies performance requirements for electronic controlgear for use on DC or
AC supplies up to 1 000 V (alternating current at 50 Hz or 60 Hz) and with an output
frequency which can deviate from the supply frequency, associated with LED modules
according to IEC 62031. Controlgear for LED modules specified in this document are
designed to provide constant voltage or current. Deviations from the pure voltage and current
types do not exclude the gear from this document.
NOTE 1...view more

IEC 60598-2-23:2020 specifies requirements for extra-low-voltage lighting systems for ELV light sources, intended for ordinary interior use on supply voltages not exceeding 1 000 V. The luminaires, being connected in parallel, are supplied via freely suspended continuous supporting conductors or profiles, the current in the ELV part of the system not exceeding 25 A.
This second edition cancels and replaces the first edition published in 1996 and Amendment 1:2000. This edition constitutes a tech...view more

IEC TR 61547-1:2020 is available as IEC TR 61547-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC TR 61547-1:2020 describes an objective light flickermeter, which can be applied for the following purposes:
- measuring the intrinsic performance of all lighting equipment without the application of voltage fluctuations in terms of illuminance flicker; during this measurement, the lighti...view more

IEC 63067:2020 applies to plugs and receptacles for single or multiple pole connecting devices used for aeronautical ground lighting applications.
Additional requirements and usage of connecting devices are given in different parts of IEC 61820 series.
Connecting devices complying with this document are suitable for use in environmental class E11 according to IEC 61820-1.

This document describes a method, based on measurements combined with calculations, to
determine specific characteristics of the inrush current of single and/or multiple lighting products
of the same type. Lighting products include the following:
• light sources with integrated controlgear,
• controlgear,
• luminaires.
The inrush current characteristics that are determined are
• the peak inrush current,
• the inrush current pulse duration.
This document applies to lighting products conn...view more