43.040.80 - Crash protection and restraint systems

This document establishes the positioning zones, dimensions and general and static strength requirements for lower tether anchorages. Lower tether anchorages can be used together with seat bight anchorages according to ISO 13216-1, or with other methods for anchoring child restraint systems (CRS) in road vehicles. This document is applicable to all seating positions, intended by the vehicle manufacturer, for use with rearward-facing CRSs. These seating positions can include outer and mid positio...view more

This document specifies the concept of operation, minimum functionality, system requirements, system interfaces, and test procedures for bicyclist detection and collision mitigation systems (BDCMS). It also defines the system test criteria necessary to verify that a given implementation meets the requirements of this document. Implementation choices are left to system designers, wherever possible. BDCMS are fundamentally intended to provide emergency braking (EB) of equipped vehicles in order to...view more

The purpose of this new standard is to define a list of functionalities for a standard connector / interface between the vehicle and the alcohol interlock, which can be used for communication between the vehicle and the alcohol interlock in both directions for information exchange. It specifies the interface for an aftermarket installation of alcohol interlocks

This document classifies the spatial requirements in a vehicle to enable a child restraint system (CRS) to be conveniently mounted. It also specifies the dimensions of child restraint systems, to ensure that they will fit in vehicles. A classification scheme is provided to determine dimensional compatibility between child restraint systems and the available space at specified seating positions in vehicles. The dimensional requirements refer to forward-facing child restraint systems of three size...view more

This document specifies the child seat presence and orientation detection (CPOD) resonator as part of the CPOD system. It defines the electrical and environmental requirements to be met by the resonators as a condition for CPOD compatibility.

This document specifies a child seat presence detection system that enables child seats placed on any passenger seats to be automatically detected where a child is at risk from an active airbag. The system provides the option of using additional information about the orientation of the child seat. This document specifies the minimum functional requirements in order to ensure compatibility between child seat presence and orientation detection system (CPOD) child seats and CPOD passenger seats. Co...view more

This Technical Specification establishes performance testing and assessment procedures for whole Truck Mounted Attenuator systems (TMAs) under impact, and includes:
-   Performance, acceptance and impact severity criteria;
-   Requirements for the assessment of the connection to the mobile carrier;
-   Minimum requirements for labelling.

This Technical Specification establishes test methods for whole Truck Mounted Attenuator systems (TMAs) under impact..

ISO 19237:2017 specifies the concept of operation, minimum functionality, system requirements, system interfaces, and test procedures for Pedestrian Detection and Collision Mitigation Systems (PDCMS). It specifies the behaviours that are required for PDCMS, and the system test criteria necessary to verify that a given implementation meets the requirements of this document. Implementation choices are left to system designers wherever possible. PDCMS reduce the severity of pedestrian collisions th...view more

ISO 29061-3:2017 specifies the criteria for judgement of usability of child restraint systems (CRS) when installing them with the vehicle seat belts. ISO 29061-3:2017 provides criteria for judgement of: - ease of availability of instructions; - clarity of instruction manual and labelling; and - ease of use of design related features of the CRS related to the installation in a vehicle. NOTE Booster system usability evaluation is covered by ISO 29061-5.

ISO 29061-4:2017 provides criteria for judgement of usability of child restraint systems (CRS) with regard to the securing of a child in the child seat and other daily handling aspects. ISO 29061-4:2017 provides criteria for judgement of: - ease of availability of instructions; - clarity of instruction manual and labelling; and - the ease of use of design related features of the CRS related to securing the child or child dummy in a CRS installed in vehicle. ISO 29061-4:2017 can be used in conjun...view more

ISO 29061-5:2017 provides criteria for judgement of usability of booster seat child restraint systems (CRS) when installing them and securing a child. ISO 29061-5:2017 provides criteria for judgement of: - ease of availability of instructions; - clarity of instruction manual and labelling; and - ease of use of design related features of the CRS related to the installation in a vehicle. The procedure can also be used for evaluation of vehicle integrated booster systems. NOTE Although ISOFIX is de...view more

ISO/DIS 22239-3:2017 specifies instructions for use as well as labelling requirements of child restraint systems (CRS) and vehicles equipped with the child seat presence and orientation detection system (CPOD) specified in ISO/TS 22239‑1, which enables the automatic recognition of CRS placed on a passenger seat.

This European Standard defines the content and the layout of an installation document providing necessary and useful information about the aftermarket installation of an alcohol interlock into a vehicle. It details the type of the vehicle, connection schematics, accessibility instructions and recommendations to avoid safety risks.
The contents and layout ensures that the information document be easy to use by installers in different countries and may be available in paper or electronic format.
...view more

An alcohol interlock is a system comprising a breath alcohol measuring instrument and an immobiliser which may be easily installed in motor vehicles as passenger cars, coaches, taxis, hazardous goods transporters, lorries, trams, trains, motorcycles, boats, or snow mobiles. Before the vehicle motor can be started or the vehicle can be moved, a breath sample has to be provided to the alcohol interlock, normally through a mouthpiece. Once the breath alcohol measurement has been performed, the alco...view more

EN 50436-1 specifies test methods and performance requirements for breath alcohol controlled alcohol interlocks. It covers alcohol interlocks intended to be used in programmes for drink driving offenders as well as in programmes monitored or controlled in a comparable way. This European Standard is directed at test laboratories and manufacturers of alcohol interlocks. It defines requirements and test procedures for type testing. Several parameters (such as alcohol concentration or breath volume)...view more

ISO 14513:2016 specifies a test method to simulate the head impact of an adult pedestrian to the bonnet top of passenger vehicles or light truck vehicles of up to 3,5 t (GVM), as defined in ISO 3833. The impact device to be used in this test method will be robust for a vehicle impact velocity of up to 11 m/s. The test method specified addresses the reduction of an adult pedestrian head injury risk; it does not test for injuries to other regions of the pedestrian. The evaluation of injury risk to...view more

This standard applies to the metrological tyre pressure gauges (TPG) which operate using pressure equipment (pre-setting devices used in fixed or mobile installations) to inflate the tyres of road using vehicles (cars, trucks) and which may be capable of interacting with tyre pressure management systems (TPMS) which monitor the pressure of the tyre of the vehicle, whereby the TPG may be steered by the TPMS. This standard defines requirements for the interoperability/compatibility of TPG with TPM...view more