65.060.20 - Soil-working equipment

This document, intended to be used together with ISO 4254-1, specifies the safety requirements and
their verification for the design and construction of mounted, semi-mounted and trailed power-driven
soil-working machines used in agriculture. In addition, it specifies the type of information on safe
working practices (including residual risks) to be provided by the manufacturer.
This document deals with significant hazards (as listed in Annex A), hazardous situations and events
relevant to ...view more

ISO 4254-5:2018, intended to be used together with ISO 4254‑1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted and trailed power-driven soil-working machines used in agriculture. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
ISO 4254-5:2018 deals with significant hazards (as listed in Annex A), hazardous situations and events relevant to ...view more

ISO 4254-5:2018, intended to be used together with ISO 4254‑1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted and trailed power-driven soil-working machines used in agriculture. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. ISO 4254-5:2018 deals with significant hazards (as listed in Annex A), hazardous situations and events relevant to p...view more

This European Standard specifies safety requirements and testing for design and construction of, pedestrian controlled tractors with mounted rotary cultivators with the cultivator rotating axis horizontal and perpendicular to the direction of motion of the machine, motor hoes and motor hoes with drive wheel(s), all as used in agriculture, forestry, landscaping and gardening (including amenity use). It describes methods for the elimination or reduction of risks arising from their use. In addition...view more

CEN/TC 144 - Modification to one Figure in 5.7.2.1.

This European Standard specifies safety requirements and testing for design and construction of, pedestrian controlled tractors with mounted rotary cultivators with the cultivator rotating axis horizontal and perpendicular to the direction of motion of the machine, motor hoes and motor hoes with drive wheel(s), all as used in agriculture, forestry, landscaping and gardening (including amenity use). It describes methods for the elimination or reduction of risks arising from their use. In addition...view more

This European Standard specifies safety requirements and testing for design and construction of, pedestrian controlled tractors with mounted rotary cultivators with the cultivator rotating axis horizontal and perpendicular to the direction of motion of the machine, motor hoes and motor hoes with drive wheel(s), all as used in agriculture, forestry, landscaping and gardening (including amenity use).
It describes methods for the elimination or reduction of risks arising from their use. In additio...view more

Specifies the main dimensions and clearance zones for harrow and cultivator S-tines, type 0 to 3.

Specifies the main fixing dimensions for interchangeable shovels designed to fit tines which conform to a type specified in this standard. applies to the lower portion of tines for fixing of various types of shovels having a working width of up to 400 mm. The following fixing types are specified: type 1 - one hole; - type 2 - two holes; type 3 - two holes, heavy type.

Specifies interchangeability dimensions for agricultural disks of the same type and nominal size, classified as types A, B, and C. Applies to disks as working parts of ploughs, harrows, and disk-tillers. Tabulates concave disks type B, variant 1 and 2, and type C (table 1), type B, variant 3 (table 2), and tolerances for eccentricity and wobble of disk types B and C (table 3). The figures 1 to 4 illustrate profiles and sections.

Specifies the main dimensions and clearance zones for harrow and cultivator S-tines, type 0 to 3.

The aim of the test (bending in direction of travel, lateral bending, variation in working depth and in soil penetration angle, permanent deformation, fatigue) is to give reproducible results to compare the quality of S-tines. Applies to S-tines as specified in ISO 5678; the test method can also be used to test other similar products.

Specifies the dimensions for four types of blades. Applies to blades with two fixing holes. The arrangement and dimensions of the holes shall be as given in figure 1 and, according to the type blade, dimensions and tolerances shall be as given in table 1.

This second edition cancels and replaces the first edition (1981). Specifies the dimensions of hoe blades with working width up to and including 220 mm. Figure 1 illustrates the contours, dimensions and holes.

Lays down the main dimensions and specifies the modular arrangement and above-ground disposition of yokes on bearer frames designed for coupling bearer frames an traction links of soil working equipment. Applies to equipment with traction resistance up to 1 2 00 N per metre of the working width. The figure is given to indicate the dimensions of yokes, not to define their design.

Specifies the main fixing dimensions for interchangeable shovels designed to fit tines which conform to a type specified in this standard. applies to the lower portion of tines for fixing of various types of shovels having a working width of up to 400 mm. The following fixing types are specified: type 1 - one hole; - type 2 - two holes; type 3 - two holes, heavy type.

Specifies interchangeability dimensions for agricultural disks of the same type and nominal size, classified as types A, B, and C. Applies to disks as working parts of ploughs, harrows, and disk-tillers. Tabulates concave disks type B, variant 1 and 2, and type C (table 1), type B, variant 3 (table 2), and tolerances for eccentricity and wobble of disk types B and C (table 3). The figures 1 to 4 illustrate profiles and sections.

N 944 refers