Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety

This European Standard specifies safety requirements and testing for design and construction of, pedestrian controlled tractors with mounted rotary cultivators with the cultivator rotating axis horizontal and perpendicular to the direction of motion of the machine, motor hoes and motor hoes with drive wheel(s), all as used in agriculture, forestry, landscaping and gardening (including amenity use).
It describes methods for the elimination or reduction of risks arising from their use. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.
This European Standard does not cover the requirements to fulfil national road traffic regulations such as lights, steering and braking.
Environmental aspects have not been considered in this standard.
This European Standard applies primarily to machines which are manufactured after the date of issue of the standard.

Maschinen für die Land- und Forstwirtschaft - Einachstraktoren mit angebauter Fräse, Motorhacken, Triebradhacken - Sicherheit

Diese Europäische Norm legt sicherheitstechnische Anforderungen und Prüfungen für die Gestaltung und Konstruktion von Einachstraktoren mit angebauter Fräse fest, deren Drehachse horizontal oder vertikal zur Bewegungsrichtung der Maschine angeordnet ist, sowie von Motorhacken und Triebradhacken, die in der Land- und Forstwirtschaft sowie der Landschafts- und Gartenpflege (einschließlich Freizeitbereich) eingesetzt werden. Sie beschreibt Maßnahmen zur Vermeidung oder Verminderung der sich aus dem Gebrauch ergebenden Gefährdungen. Außerdem gibt sie Informationen über sicheres Arbeiten, die vom Hersteller zur Verfügung zu stellen sind. Diese Europäische Norm enthält keine Anforderungen zur Erfüllung nationaler Straßenverkehrsvorschriften wie beispielsweise an Beleuchtung, Lenkung und Bremsen. Umweltaspekte wurden in dieser Norm nicht in Betracht gezogen. Diese Europäische Norm gilt in erster Linie für Maschinen, die nach dem Ausgabedatum der Norm hergestellt worden sind.

Matériel agricole et forestier - Motoculteurs avec fraises portées, motobineuses et fraises à roue(s) motrice(s) - Sécurité

La présente norme européenne détermine les prescriptions de sécurité et les vérifications pour la conception et la construction des motoculteurs équipés de fraises dont l'axe de rotation est horizontal et perpendiculaire au sens d'avancement de la machine, des motobineuses et des fraises à roue(s) motrice(s), utilisés en agriculture, en foresterie, pour l'entretien des espaces verts et pour le jardinage (y compris à usage de loisir).
Elle décrit les méthodes pour éliminer ou réduire les risques inhérents à leur utilisation. En outre, elle spécifie le type d'informations que le fabricant doit donner sur les pratiques d'utilisation sûre.
La présente norme ne couvre pas les prescriptions permettant de satisfaire aux réglementations routières nationales telles que l'éclairage, le système de direction et le freinage.
Les aspects liés à l'environnement n'ont pas été pris en compte dans cette norme.
La présente norme européenne s'applique avant tout aux machines fabriquées après la date de publication de la norme.

Kmetijski in gozdarski stroji - Enoosni traktorji s priključenim prekopalnikom, motorni prekopalniki in motorni prekopalniki s pogonskim(a) kolesom(a) - Varnost

Ta evropski standard opredeljuje varnostne zahteve in preskušanje za načrtovanje in konstrukcijo enoosnih traktorjev s priključenim prekopalnikom, z vodoravno rotirajočo osjo prekopalnika in navpično glede na smer gibanja stroja, motorne prekopalnike in motorne prekopalnike s pogonskim(a) kolesom(a), vsi navedeni stroji kot se uporabljajo v kmetijstvu, gozdarstvu, krajinskem oblikovanju in vrtnarstvu (vključno z uporabo v javne namene). Opisuje metode za preprečevanje ali zmanjševanje tveganj, ki izvirajo iz njihove uporabe. Poleg tega opredeljuje vrste podatkov, ki jih mora zagotoviti proizvajalec glede varnih delovnih postopkov. Ta evropski standard ne zajema zahtev za izpolnjevanje predpisov posameznih držav v cestnem prometu, kot so luči, krmiljenje in zaviranje. Okoljski vidiki v tem standardu niso obravnavani. Ta evropski standard velja predvsem za stroje, ki so bili izdelani po datumu izdaje tega standarda.

General Information

Status
Published
Publication Date
01-Dec-2009
Withdrawal Date
30-Dec-2010
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
07-Dec-2023

Relations

Buy Standard

Standard
EN 709:1998+A4:2010
English language
44 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 709:1998+A4:2010
01-marec-2010
.PHWLMVNLLQJR]GDUVNLVWURML(QRRVQLWUDNWRUMLVSULNOMXþHQLPSUHNRSDOQLNRP
PRWRUQLSUHNRSDOQLNLLQPRWRUQLSUHNRSDOQLNLVSRJRQVNLP D NROHVRP D 9DUQRVW
Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary
cultivators, motor hoes, motor hoes with drive wheel(s) - Safety
Maschinen für die Land- und Forstwirtschaft - Einachstraktoren mit angebauter Fräse,
Motorhacken, Triebradhacken - Sicherheit
Matériel agricole et forestier - Motoculteurs avec fraises portées, motobineuses et fraises
à roue(s) motrice(s) - Sécurité
Ta slovenski standard je istoveten z: EN 709:1997+A4:2009
ICS:
65.060.10 Kmetijski traktorji in prikolice Agricultural tractors and
trailed vehicles
65.060.20 Oprema za obdelovanje tal Soil-working equipment
SIST EN 709:1998+A4:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 709:1998+A4:2010

---------------------- Page: 2 ----------------------

SIST EN 709:1998+A4:2010


EUROPEAN STANDARD
EN 709:1997+A4

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2009
ICS 65.060.10; 65.060.20 Supersedes EN 709:1997+A2:2009
English Version
Agricultural and forestry machinery - Pedestrian controlled
tractors with mounted rotary cultivators, motor hoes, motor hoes
with drive wheel(s) - Safety
Matériel agricole et forestier - Motoculteurs avec fraises Maschinen für die Land- und Forstwirtschaft -
portées, motobineuses et fraises à roue(s) motrice(s) - Einachstraktoren mit angebauter Fräse, Motorhacken,
Sécurité Triebradhacken - Sicherheit
This European Standard was approved by CEN on 4 March 1997 and includes Amendment 1 approved by CEN on 1 July 1999,
Amendment 2 approved by CEN on 29 December 2008 and Amendment 4 approved by CEN on 24 October 2009.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 709:1997+A4:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 709:1998+A4:2010
EN 709:1997+A4:2009 (E)
Contents Page
Foreword .4
Introduction .5
1 Scope .5
2 Normative references .5
3 Definitions .6
4 List of hazards .6
5 Safety requirements and/or measures .7
5.1 General .7
5.2 Starting device .7
5.3 Manual controls .8
5.4 Identification
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.