ISO 5680:1979

Equipment for working soil — Tines and shovels for cultivators — Main fixing dimensions

Specifies the main fixing dimensions for interchangeable shovels designed to fit tines which conform to a type specified in this standard. applies to the lower portion of tines for fixing of various types of shovels having a working width of up to 400 mm. The following fixing types are specified: type 1 - one hole; - type 2 - two holes; type 3 - two holes, heavy type.

Matériel de travail du sol — Dents et socs de cultivateur — Principales dimensions de fixation

Stroji za obdelavo zemlje - Prsti in lemežki (rezila) za kultivatorje - Glavne priključne mere

General Information

• Status: Published
• Publication Date: 31-Mar-1979
• ICS: 65.060.20 - Soil-working equipment
• Technical Committee: ISO/TC 23 - Tractors and machinery for agriculture and forestry
• Drafting Committee: ISO/TC 23 - Tractors and machinery for agriculture and forestry
• Current Stage: 9060 - Close of review
• Completion Date: 02-Sep-2028
• Ref Project: SIST ISO 5680:1995 - Equipment for working soil -- Tines and shovels for cultivators -- Main fixing dimensions

Overview

ISO 5680:1979 - Equipment for Working Soil - Tines and Shovels for Cultivators - Main Fixing Dimensions is an international standard published by ISO, the International Organization for Standardization. This standard establishes the main fixing dimensions for interchangeable shovels designed to fit specific tines used on soil cultivators. Its scope centers on standardizing the connection points at the lower portion of tines, which support shovels with working widths of up to 400 mm. By setting out these key dimensions, ISO 5680:1979 helps ensure interoperability and ease of maintenance for agricultural machinery across manufacturers and markets.

Key Topics

• Fixing Types:
  The standard outlines three main fixing types for attaching shovels to tines:

  • Type 1: One hole
  • Type 2: Two holes
  • Type 3: Two holes, heavy type

• Main Fixing Dimensions:
  The standard specifies critical dimensions that include:

  • Radius of curvature (tines and shovels)
  • Contact line angle
  • Distance between fixing bolt holes
  • Bolt hole diameter
  • Dimensions for square neck bolt holes
  • Countersink angle for bolt holes

• Classification and Limitations:
  While ISO 5680:1979 addresses the principal fixing dimensions, it does not limit further design or configuration changes, nor does it specify the materials or manufacturing methods for shovels and tines.

Applications

ISO 5680:1979 serves a crucial role in agriculture, particularly in the standardization of soil cultivation equipment. Its practical applications include:

• Interchangeability: Standardized fixing dimensions enable shovels from different manufacturers to fit tines that conform to ISO 5680, offering flexibility in sourcing and replacing parts.
• Simplified Maintenance: With fixed dimensions, maintenance teams can replace worn shovels without concern for compatibility, reducing equipment downtime and inventory complexity.
• International Trade: Manufacturers and distributors can trade components globally with the assurance that standardized fixing points will fit machinery complying with ISO 5680.
• Enhanced Equipment Lifespan: Ability to use a wide variety of shovels on standardized tines extends the operational life and versatility of soil cultivators.

Use of this standard is prevalent among makers and users of agricultural machinery such as cultivators, tillers, and soil working implements. Ensuring compliance with ISO 5680:1979 helps agricultural operations achieve not only efficiency and reliability, but also safety in equipment usage.

Related Standards

Organizations and professionals referencing ISO 5680:1979 may also consider the following related standards:

• ISO 5679: Equipment for working soil-Tines for cultivators-Main dimensions
• ISO 4254 Series: Agricultural machinery-Safety
• ISO/TC 23 Standards: Tractors and machinery for agriculture and forestry

These related standards focus on complementary aspects such as overall tine dimensions, machinery safety, and broader agricultural equipment specifications, providing a more comprehensive approach to agricultural equipment standardization.

---

Promoting interchangeability, compatibility, and streamlined maintenance, ISO 5680:1979 underpins global best practices in the design and operation of soil working equipment.

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-1995
6WURML]DREGHODYR]HPOMH3UVWLLQOHPHåNLUH]LOD]DNXOWLYDWRUMH*ODYQH
SULNOMXþQHPHUH
Equipment for working soil -- Tines and shovels for cultivators -- Main fixing dimensions
Matériel de travail du sol -- Dents et socs de cultivateur -- Principales dimensions de
fixation
Ta slovenski standard je istoveten z: ISO 5680:1979
ICS:
65.060.20 Oprema za obdelovanje tal Soil-working equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

INTERNATIONAL STANDARD.
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MElKAYHAPOAHAII OPTAHZ13AUMfl l-Io CTAHAAPTM3ALW-I.ORGANISATION INTERNATIONALE DE NORMALlSATlON
Equipment for working soil - Tines and shovels for
Main fixing dimensions
cultivators -
Matkiel de travail du so/ - Den ts et socs de cultivateur - Principales dimensions de fixa tion
First edition
- 1979-04-01
w Ref. No. ISO 56804979 (EI
U DC 631.316.022
-
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation
of national Standards institutes (ISO member bodies). The work of developing
International Standards is carried out through ISO technical committees. Every
member body interested in a subject for which a technical committee has been set
up has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technicaf committees are circulated
to the member bodies for approval before their acceptance as International
Standards by the ISO Council.
International Standard ISO 5680 was developed by Technical Committes
lSO/TC 23, Trattors and maihinery for agriculture and forestry, and was circulated
to the member bodies in May 1977.
lt has been approved by the member bodies of the following countries :
Austral ia India Romania
Austria Iran South Africa, Rep. of
Belgium I taly Spain
Brazil
Korea, Dem. P. Rep. of Sweden
Canada Korea, Rep. of Switzerland
Czechoslovakia Mexico Turkey
Denmark New Zealand United Kingdom
Finland Philippines USSR
France Poland Yugoslavia
Germany, F. R.
Portugal
The member * body of the following country expressed
disapproval of the document
on technical grounds :
USA
0 International Organization for Standardkation, 1979 l
P
...

INTERNATIONAL STANDARD.
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MElKAYHAPOAHAII OPTAHZ13AUMfl l-Io CTAHAAPTM3ALW-I.ORGANISATION INTERNATIONALE DE NORMALlSATlON
Equipment for working soil - Tines and shovels for
Main fixing dimensions
cultivators -
Matkiel de travail du so/ - Den ts et socs de cultivateur - Principales dimensions de fixa tion
First edition
- 1979-04-01
w Ref. No. ISO 56804979 (EI
U DC 631.316.022
-
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation
of national Standards institutes (ISO member bodies). The work of developing
International Standards is carried out through ISO technical committees. Every
member body interested in a subject for which a technical committee has been set
up has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technicaf committees are circulated
to the member bodies for approval before their acceptance as International
Standards by the ISO Council.
International Standard ISO 5680 was developed by Technical Committes
lSO/TC 23, Trattors and maihinery for agriculture and forestry, and was circulated
to the member bodies in May 1977.
lt has been approved by the member bodies of the following countries :
Austral ia India Romania
Austria Iran South Africa, Rep. of
Belgium I taly Spain
Brazil
Korea, Dem. P. Rep. of Sweden
Canada Korea, Rep. of Switzerland
Czechoslovakia Mexico Turkey
Denmark New Zealand United Kingdom
Finland Philippines USSR
France Poland Yugoslavia
Germany, F. R.
Portugal
The member * body of the following country expressed
disapproval of the document
on technical grounds :
USA
0 International Organization for Standardkation, 1979 l
Printed in Switzerland
ISO 56804979 (E)
INTERNATIONAL STANDARD
Equipment for working soil - Tines and shovels for
Main fixing dimensions
cultivators - ’
- Type 2 - two holes;
0 INTRODUCTION
two holes, heavy type.
- Type 3 -
This International Standard deals with tines and shovels for
cultivators according to their method of attachment.
This International Standard specifies only the main fixing
dimensions, thus not in
...

NORME INTERNATIONALE
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXAYHAPOAHAII OPrAHM3ALUUI n0 CTAHAAPTM3ALWiH~ORGANISATION INTERNATIONALE DE NORMALISATION
Matériel de travail du sol
- Dents et socs de cultivateur
- Principales dimensions de fixation
Equipment for working the soi1 - Tines and shovels for cultivators - Main fixing dimensions
Première édition : 1979-04-01
Réf. no : ISO 56804979 (FI
CDU 631.316.022
Descripteurs : matériel de travail du sol, machine agricole, cultivateur, dimension.
Prix basé sur 3 pages
AVANT-PROPOS
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont
soumis aux comités membres pour approbation, avant leur acceptation comme
Normes internationales par le Conseil de I’ISO.
La Norme internationale ISO 5680 a été élaborée par le comité technique
ISOJTC 23, Tracteurs et matériels utilisés pour /‘agriculture et la sylviculture, et a
été soumise aux comités membres en mai 1977.
Les comités membres des pays suivants l’ont approuvée :
Afrique du Sud, Rép. d’ Espagne
Portugal
Allemagne, R.F. Finlande Roumanie
Australie France Royaume-Uni
Autriche Inde Suède
Belgique Iran
Suisse
Brésil Italie
Tchécoslovaquie
Mexique
Canada Turquie
Corée, Rép. dém, p. de Nouvelle-Zélande
URSS
Corée, Rép. de Philippines
Yougoslavie
Danemark Pologne
Le comité membre du pays suivant l’a désapprouvée pour des raisons techniques :
USA
0 Organisation internationale de normalisation, 1979 l
Imprimé en Suisse
lSO5680-1979(F)
NORME INTERNATIONALE
Dents et socs de cultivateur
Matériel de travail du sol -
- Principales dimensions de fixation
- Type 2 - deux trous;
0 INTRODUCTION
- Type 3 - deux trous, pour type lourd.
La présente Norme internationale traite des dents et des
socs pour les cultivateurs selon leur méthode de fixation.
Elle spécifie seulement les dimensions principales de
4 PRINCIPALES DIMENSIONS DE FIXATION
fixation, afin de ne pas li
...

NORME INTERNATIONALE
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXAYHAPOAHAII OPrAHM3ALUUI n0 CTAHAAPTM3ALWiH~ORGANISATION INTERNATIONALE DE NORMALISATION
Matériel de travail du sol
- Dents et socs de cultivateur
- Principales dimensions de fixation
Equipment for working the soi1 - Tines and shovels for cultivators - Main fixing dimensions
Première édition : 1979-04-01
Réf. no : ISO 56804979 (FI
CDU 631.316.022
Descripteurs : matériel de travail du sol, machine agricole, cultivateur, dimension.
Prix basé sur 3 pages
AVANT-PROPOS
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont
soumis aux comités membres pour approbation, avant leur acceptation comme
Normes internationales par le Conseil de I’ISO.
La Norme internationale ISO 5680 a été élaborée par le comité technique
ISOJTC 23, Tracteurs et matériels utilisés pour /‘agriculture et la sylviculture, et a
été soumise aux comités membres en mai 1977.
Les comités membres des pays suivants l’ont approuvée :
Afrique du Sud, Rép. d’ Espagne
Portugal
Allemagne, R.F. Finlande Roumanie
Australie France Royaume-Uni
Autriche Inde Suède
Belgique Iran
Suisse
Brésil Italie
Tchécoslovaquie
Mexique
Canada Turquie
Corée, Rép. dém, p. de Nouvelle-Zélande
URSS
Corée, Rép. de Philippines
Yougoslavie
Danemark Pologne
Le comité membre du pays suivant l’a désapprouvée pour des raisons techniques :
USA
0 Organisation internationale de normalisation, 1979 l
Imprimé en Suisse
lSO5680-1979(F)
NORME INTERNATIONALE
Dents et socs de cultivateur
Matériel de travail du sol -
- Principales dimensions de fixation
- Type 2 - deux trous;
0 INTRODUCTION
- Type 3 - deux trous, pour type lourd.
La présente Norme internationale traite des dents et des
socs pour les cultivateurs selon leur méthode de fixation.
Elle spécifie seulement les dimensions principales de
4 PRINCIPALES DIMENSIONS DE FIXATION
fixation, afin de ne pas li
...