65.060.50 - Harvesting equipment

2019-11-12 JF TC is reviewing editorially the Annex ZA and is preparing the information on significant changes to be put in the Foreword

2019-11-12 JF TC is reviewing editorially the Annex ZA and is preparing the information on significant changes to be put in the Foreword

This European Standard specifies safety requirements and their verification for design and construction of pedestrian controlled motor mowers with rotary or reciprocating cutting means used in agricultural, forestry and landscaping to cut and/or mulch grass or similar plants or scrub and woody vegetation.
For the purposes of this standard the following types of pedestrian controlled machines are considered to be motor mowers:
-   flail mowers;
-   grassland mowers;
-   scrub clearing machines;
-   ...view more

This document specifies a preferred method for determining and designating the capacity and unloading rate of combine harvester grain tanks and unloading systems.

This document, when used together with ISO 4254-1, specifies the safety requirements and their
verification for the design and construction of combine harvesters, forage harvesters, cotton harvesters
and sugar cane harvesters. It describes methods for the elimination or reduction of hazards arising
from the intended use of these machines by one person (the operator) in the course of normal operation
and service. In addition, it specifies the type of information on safe working practices to b...view more

ISO 4254-7:2017, when used together with ISO 4254‑1, specifies the safety requirements and their verification for the design and construction of combine harvesters, forage harvesters, cotton harvesters and sugar cane harvesters. It describes methods for the elimination or reduction of hazards arising from the intended use of these machines by one person (the operator) in the course of normal operation and service. In addition, it specifies the type of information on safe working practices to be ...view more

ISO 4254-7:2017, when used together with ISO 4254‑1, specifies the safety requirements and their verification for the design and construction of combine harvesters, forage harvesters, cotton harvesters and sugar cane harvesters. It describes methods for the elimination or reduction of hazards arising from the intended use of these machines by one person (the operator) in the course of normal operation and service. In addition, it specifies the type of information on safe working practices to be ...view more

This standard, to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted and trailed bale wrappers for forage bales. In addition, it specifies the type of information on safe working practices, including residual risks, to be provided by the manufacturer.

ISO 4254-14:2016 intended to be used together with ISO 4254‑1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed, and stationary bale wrapper for bales of agricultural harvesting products including wrappers which are combined or integrated with pick-up balers.
It describes methods for the elimination or reduction of hazards arising from the intended use and reasonably foreseeable misuse of these machines by one person (the...view more

This part of IS0 6689 specifies terms and definitions
relating to combines and their component parts. In
association with IS0 6689-2, which lays down
methods of measuring characteristics and
performance requirements for the terms defined, this
part of IS0 6689 identifies dimensions and other
characteristics aimed at allowing comparison of
operations of the component parts.

This part of IS0 6689 specifies the methods and requirements in assessing the dimensions and performance of a
combine and its functional components as defined in IS0 6689-l. It also allows comparison of combine
performance through comparative testing.

ISO 5718:2013 specifies requirements for blades used on rotary disk mowers and rotary drum mowers, mounted, semi-mounted, trailed, or self-propelled, as used for forage crop harvesting in agriculture only. It specifies requirements for testing and marking of such blades. A bend test and impact test for checking the brittleness and toughness of the material is also included. It does not specify dimensional requirements.

This part of ISO 4254, to be used together with ISO/FDIS 4254-1:2004, specifies safety requirements and their verification for the design and construction of rotary mowers and flail-mowers with one or several vertical axes or a horizontal axis, mounted, semi-mounted,trailed or self-propelled. In addition, this document specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.

ISO 4254-12:2012, where used with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of rotary disc mowers, rotary drum mowers, as used for forage crop harvesting in agriculture only, and flail mowers with a horizontal axis for use in agriculture only, that are mounted, semi-mounted, trailed or self-propelled. It describes methods for the elimination or reduction of hazards arising from the intended use and reasonably foreseeable misuse of these ...view more