This document specifies requirements for steel strand which has been given a stress-relieving heat treatment according to the general requirements specified in ISO 6934-1. This document covers 10 grades of steel strand for use in prestressed concrete construction; each strand can contain either 2, 3, 7 or 19 individual wires. In case of any conflict between the requirements of this document and ISO 6934-1, the requirements of document prevail.

    • sale 15% off
    • Standard
      9 pages
      English language
    • sale 15% off
    • Draft
      9 pages
      English language
    • sale 15% off
    • Draft
      6 pages
      English language

This document specifies technical requirements for ribbed bars to be used as reinforcement in concrete. It is applicable to steel delivered in the form of bars, coils and de-coiled products. This document covers both weldable and non-weldable steels. It does not apply to ribbed bars produced from finished products, such as plates and railway rails. The production process is at the discretion of the manufacturer.

    • sale 15% off
    • Standard
      25 pages
      English language

This document specifies chemical and mechanical test methods and measurement methods of geometrical characteristics applicable to welded fabric and lattice girders for the reinforcement of concrete.
NOTE In some countries, the expression "welded wire reinforcement" is used in place of "welded (wire) fabric".
For those tests not specified in this document (e.g. bend test, rib/indentation geometry, mass per metre), ISO 15630-1 is applicable.
This document does not cover the sampling conditions ...
view more

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

This document specifies test methods applicable to prestressing steel (bar, wire or strand) for concrete.
This document does not cover the sampling conditions that are dealt with in the product standards.
A list of options for agreement between the parties involved is provided in Annex A.

    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day

This document specifies chemical and mechanical test methods and measurement methods of
geometrical characteristics applicable to reinforcing bars, rods and wire for concrete.
This document does not cover the sampling conditions that are dealt with in the product standards.
A list of options for agreement between the parties involved is provided in Annex A.

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day

This document specifies chemical and mechanical test methods and measurement methods of geometrical characteristics applicable to reinforcing bars, rods and wire for concrete.
This document does not cover the sampling conditions that are dealt with in the product standards.
A list of options for agreement between the parties involved is provided in Annex A.

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day

This document specifies test methods applicable to prestressing steel (bar, wire or strand) for concrete.
This document does not cover the sampling conditions that are dealt with in the product standards.
A list of options for agreement between the parties involved is provided in Annex A.

    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day

This document specifies chemical and mechanical test methods and measurement methods of geometrical characteristics applicable to welded fabric and lattice girders for the reinforcement of concrete.
NOTE In some countries, the expression "welded wire reinforcement" is used in place of "welded (wire) fabric".
For those tests not specified in this document (e.g. bend test, rib/indentation geometry, mass per metre), ISO 15630-1 is applicable.
This document does not cover the sampling conditions ...
view more

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

This document specifies test methods applicable to prestressing steel (bar, wire or strand) for concrete. This document does not cover the sampling conditions that are dealt with in the product standards. A list of options for agreement between the parties involved is provided in Annex A.

    • sale 15% off
    • Standard
      30 pages
      French language
    • sale 15% off
    • Standard
      30 pages
      French language
    • sale 15% off
    • Standard
      30 pages
      English language

This document specifies chemical and mechanical test methods and measurement methods of geometrical characteristics applicable to reinforcing bars, rods and wire for concrete. This document does not cover the sampling conditions that are dealt with in the product standards. A list of options for agreement between the parties involved is provided in Annex A.

    • sale 15% off
    • Standard
      24 pages
      English language
    • sale 15% off
    • Standard
      24 pages
      French language

This document specifies chemical and mechanical test methods and measurement methods of geometrical characteristics applicable to welded fabric and lattice girders for the reinforcement of concrete. NOTE In some countries, the expression "welded wire reinforcement" is used in place of "welded (wire) fabric". For those tests not specified in this document (e.g. bend test, rib/indentation geometry, mass per metre), ISO 15630-1 is applicable. This document does not cover the sampling conditions tha...view more

    • sale 15% off
    • Standard
      25 pages
      English language
    • sale 15% off
    • Standard
      28 pages
      French language

This European Standard specifies requirements for hot-dip galvanized reinforcing steel in the form of products according to EN 10080 and subjected to further processing e.g. bent bars, stirrups, products straightened from coils, products cut from bars, welded structures (other than welded fabric or lattice girders according to prEN 10348 1) and any other components fabricated for use in the reinforcement of concrete.
This European Standard does not apply to hot dip galvanized reinforcement for ...
view more

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements for hot-dip galvanized reinforcing steel in the form of products according to EN 10080 and subjected to further processing, e.g. bent bars, stirrups, products straightened from coils, products cut from bars, welded structures (other than welded fabric or lattice girders according to EN 10348, Part 1) and any other components fabricated for use in the reinforcement of concrete.
This document does not apply to hot dip galvanized reinforcement for pre-stressing...
view more

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

This document specifies test methods applicable to couplers for mechanical splices of steel reinforcing bars. This document is applicable to the various standards for steel reinforcing bars as well as the various reinforced concrete design standards.

    • sale 15% off
    • Standard
      9 pages
      English language

This document specifies requirements for couplers for the mechanical splicing of steel reinforcing bars. More onerous requirements can be specified by the customer. This document is applicable to the continuous production of coupler components. It is intended to be used with adequate control measures for the processing of reinforcing bars, i.e. the production of the mechanical splice. This document specifies requirements for couplers used for mechanical splices in reinforced concrete structures ...view more

    • sale 15% off
    • Standard
      9 pages
      English language

This document specifies rules for a certification scheme for continuous production of steel bars, rods and wires for the reinforcement of concrete structures in order to verify conformity with requirements specified in product standards, such as ISO 6935‑1 and ISO 6935‑2. It includes requirements for the production process and management system assessment activities. A product certification scheme for continuous production consists of the following stages: — initial evaluation; — review of evide...view more

    • sale 15% off
    • Standard
      8 pages
      English language

This document specifies rules for the certification and for the self-evaluation of couplers to be used for the mechanical splicing of steel reinforcing bars. It includes requirements for the control of the manufacturing process of the couplers and for the verification of their conformity in the form of mechanical splices.

    • sale 15% off
    • Standard
      6 pages
      English language

This document specifies performance requirements for cathodic protection of steel in cement-based
concrete, in both new and existing structures. It covers building and civil engineering structures,
including normal reinforcement and prestressed reinforcement embedded in the concrete. It is
applicable to uncoated steel reinforcement and to organic-coated steel reinforcement.
This document applies to steel embedded in atmospherically exposed, buried, immersed and tidal
elements of buildings o...
view more

    • sale 10% off
    • Standard
      56 pages
      English language
    • e-Library read for
      1 day

ISO 12696:2016 specifies performance requirements for cathodic protection of steel in cement-based concrete, in both new and existing structures. It covers building and civil engineering structures, including normal reinforcement and prestressed reinforcement embedded in the concrete. It is applicable to uncoated steel reinforcement and to organic-coated steel reinforcement.
ISO 12696:2016 applies to steel embedded in atmospherically exposed, buried, immersed and tidal elements of buildings or ...
view more

    • sale 10% off
    • Standard
      56 pages
      English language
    • e-Library read for
      1 day

ISO 12696:2016 specifies performance requirements for cathodic protection of steel in cement-based concrete, in both new and existing structures. It covers building and civil engineering structures, including normal reinforcement and prestressed reinforcement embedded in the concrete. It is applicable to uncoated steel reinforcement and to organic-coated steel reinforcement. ISO 12696:2016 applies to steel embedded in atmospherically exposed, buried, immersed and tidal elements of buildings or s...view more

    • sale 15% off
    • Standard
      47 pages
      English language
    • sale 15% off
    • Standard
      53 pages
      French language