87.080 - Inks. Printing inks
Inks. Printing inks
Tinten. Druckfarben
Encres. Encres d'imprimerie
Barvila. Tiskarske barve
General Information
IEC 62899-202-6:2020(E) provides a method of in-situ measurement for the resistance change of a conductive layer formed by printing methods on a flexible substrate under specified temperature and humidity conditions.
- Standard15 pagesEnglish language
sale 15% off
This document specifies a test procedure for the preparation of test prints on paper, board, metals, foils and other suitable substrates using paste inks, such as for offset and letterpress printing, using electrically driven IGT-type and prüfbau-type printability testers. This document describes the procedure for reference optical density and reference ink film thickness. This document describes the method as used on the current models of testers. Most of the described procedures are also appli...view more
- Standard19 pagesEnglish language
sale 15% off- Draft19 pagesEnglish language
sale 15% off
This document specifies a method of measuring the visual opacity of printed specimens of white ink. It is applicable to printing opaque white ink on transparent and white or coloured opaque substrates.
- Standard9 pagesEnglish language
sale 15% off- Draft7 pagesEnglish language
sale 15% off
IEC 62899-204:2019 (E) defines the terms and specifies the standard methods for characterisation and evaluation. This document is applicable to insulator inks and printed insulating layers that are made from insulator inks used for printed electronics. The insulator inks include dielectric inks.
- Standard22 pagesEnglish language
sale 15% off
IEC 62899-202-3:2019(E) defines terms and specifies a standard method for the measurement of the sheet resistance of printed conductive films using a contactless eddy-current method.
- Standard16 pagesEnglish language
sale 15% off
IEC 62899-202-5:2018(E) specifies a mechanical bending test for evaluating the electrical properties of a printed conductive layer on an insulating substrate under repeated mechanical deformation.
- Standard15 pagesEnglish language
sale 15% off
IEC 62899-203:2018(E) defines terms and specifies standard methods for characterisation and evaluation. This document is applicable to semiconductor inks and semiconductive layers that are made from semiconductor inks.
- Standard22 pagesEnglish language
sale 15% off
This document specifies the test procedure for determining the tack value of neat paste inks and
vehicles which have low volatility and are unreactive under normal room conditions during the
timespan required for testing.
This document contains a basic description of Inkometer®1) and Inkomat®2) (Geometry A) and
TackOscope®3) and TackTester®4) (Geometry B).
- Standard15 pagesEnglish language
sale 15% off- Standard21 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies the colour and transparency characteristics that are to be met by each ink
in a process colour ink set intended for proof and production printing using offset lithography. The
specified printing conditions (which use a laboratory printability tester), the defined substrate and a
method for testing to ensure conformance are also defined. Characteristics are specified for inks used
for sheet-fed, heat-set web and radiation-curing processes.
This document does not apply...view more
- Standard17 pagesEnglish language
sale 15% off- Standard22 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 12634 specifies the test procedure for determining the tack value of neat paste inks and vehicles which have low volatility and are unreactive under normal room conditions during the timespan required for testing. ISO 12634 contains a basic description of Inkometer® and Inkomat® (Geometry A) and TackOscope® and TackTester® (Geometry B).
- Standard15 pagesEnglish language
sale 15% off- Standard21 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 2846-1:2017 specifies the colour and transparency characteristics that are to be met by each ink in a process colour ink set intended for proof and production printing using offset lithography. The specified printing conditions (which use a laboratory printability tester), the defined substrate and a method for testing to ensure conformance are also defined. Characteristics are specified for inks used for sheet-fed, heat-set web and radiation-curing processes. ISO 2846-1:2017 does not apply ...view more
- Standard17 pagesEnglish language
sale 15% off- Standard22 pagesEnglish language
sale 10% off- e-Library read for1 day
This part of ISO 2834 specifies a test method for preparation of test prints produced with liquid waterbased
or solvent-based printing inks as used in flexography and gravure printing. These test prints are
intended primarily for optical tests, such as gloss, colorimetry, transparency and reflection density.
They can also be used for testing light fastness and the chemical, physical and mechanical resistance
to mechanical and chemical attack regarding either printing ink and/or substrate. Fl...view more
- Standard7 pagesEnglish language
sale 15% off- Standard7 pagesEnglish language
sale 15% off- Standard12 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 62899-202:2016(E) defines the terms and specifies the standard methods for characterisation and evaluation. This International Standard is applicable to conductive inks and conductive layer that are made from conductive inks.
- Standard31 pagesEnglish language
sale 15% off
ISO 12632:2015 specifies test methods for - penetrability and removal times of labels that have been wet glued on bottles intended to be refilled and reused, and - resistance of printed labels against hot alkaline solution. Test results always deal with systems comprising of substrates, ink films and varnish films if present. This International Standard is valid for label substrates and printed labels. Label substrates include metalized papers. The test procedures are also valid for the evaluati...view more
- Standard4 pagesEnglish language
sale 15% off
ISO 2834-2:2015 specifies a test method for preparation of test prints produced with liquid water-based or solvent-based printing inks as used in flexography and gravure printing. These test prints are intended primarily for optical tests, such as gloss, colorimetry, transparency and reflection density. They can also be used for testing light fastness and the chemical, physical and mechanical resistance to mechanical and chemical attack regarding either printing ink and/or substrate. Flexographi...view more
- Standard7 pagesEnglish language
sale 15% off- Standard7 pagesEnglish language
sale 15% off- Standard12 pagesEnglish language
sale 10% off- e-Library read for1 day
This part of ISO 2834 specifies a test method for preparation of test prints produced with screen printing inks. These test prints are intended primarily for optical tests, such as colorimetry, transparency and reflection density as described in ISO 2846-4. They can also be used for testing gloss, light fastness and the chemical, physical and mechanical resistance to mechanical and chemical attack regarding either printing ink or substrate, or both.
- Standard7 pagesEnglish language
sale 15% off- Standard11 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 2834-3:2008 specifies a test method for preparation of test prints produced with screen printing inks. These test prints are intended primarily for optical tests, such as colorimetry, transparency and reflection density as described in ISO 2846-4. They can also be used for testing gloss, light fastness and the chemical, physical and mechanical resistance to mechanical and chemical attack regarding either printing ink or substrate, or both.
- Standard7 pagesEnglish language
sale 15% off- Standard11 pagesEnglish language
sale 10% off- e-Library read for1 day
This part of ISO 2834 specifies a laboratory method for the preparation of printed samples made with paste inks (such as inks used for lithographic and letterpress printing). Such printed samples are intended to be used for reflection based measurements, such as colorimetry and reflection density as well as for testing light fastness, and the resistance of printing inks to mechanical and chemical attack regarding either printing ink and/or substrate.
- Standard7 pagesEnglish language
sale 15% off- Standard11 pagesEnglish language
sale 10% off- e-Library read for1 day
This part of ISO 2846 specifies the colour and transparency to be produced by inks intended for four-colour coldset web offset printing when printed under specified conditions on a printability tester. It also describes the test method to ensure conformance. This part of ISO 2846 is not applicable to fluorescent inks and does not specify pigments (or spectral reflectance) so as not to preclude the use of future suitable pigment combinations and still claim compliance with its colorimetric requir...view more
- Standard11 pagesEnglish language
sale 15% off- Standard16 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 2846-2:2007 specifies the colour and transparency to be produced by inks intended for four-colour coldset web offset printing when printed under specified conditions on a printability tester. It also describes the test method to ensure conformance. ISO 2846-2:2007 is not applicable to fluorescent inks and does not specify pigments (or spectral reflectance) so as not to preclude the use of suitable future pigment combinations and still claim compliance with its colorimetric requirements.
- Standard11 pagesEnglish language
sale 15% off- Standard16 pagesEnglish language
sale 10% off- e-Library read for1 day