This International Standard describes requirements for tooth-like colour representations made of
ceramic materials used to determine the tooth colour in the patient’s mouth or to check the colour of
dental prosthesis, which are referred to as shade guides (colour rings) in this standard.
The coordinates of tooth colours in the colour space (colour coordinates) the specification of which is left
to the manufacturers’ discretion as well as the colour deviations of ceramic and other masses or m...
view more

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      11 pages
      English language
    • e-Library read for
      1 day

IEC 61966-12-1:2020 is available as IEC 61966-12-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61966-12-1:2020 defines the colour gamut metadata scheme for video systems and similar applications. The metadata can be associated with wide-gamut video colour content or to a piece of equipment to display the content. When associated with content, the colour gamut metadata defines the...
view more

    • sale 15% off
    • Standard
      81 pages
      English and French language

ISO/TS 21830 specifies a procedure, including computation, for extending the method described in ISO 18619:2015 to n-colour ICC profiles specifically for the xCLR cases where the colourants are either CMYK plus combinations from the set of red, orange, green, blue and violet or where, for the 3CLR case, the colourants are CMY-like chromatic colourants with widely-spaced hue angles. Other types of colour spaces which are otherwise permitted by 15076-1, such as 2CLR (two-device colourants), are no...view more

    • sale 15% off
    • Technical specification
      4 pages
      English language
    • sale 10% off
    • Technical specification
      9 pages
      English language
    • e-Library read for
      1 day

ISO/TS 23564 describes procedures for evaluating the accuracy of colorimetric rendering intents in ICC profiles.It applies to v4 ICC profiles made according to ISO 15076-1.It does not apply to subjective tests of ICC profiles, such as for perceptual or saturation rendering intents, and it does not apply to high dynamic range colour media or spaces.

    • sale 15% off
    • Technical specification
      6 pages
      English language
    • sale 10% off
    • Technical specification
      11 pages
      English language
    • e-Library read for
      1 day

ISO 18619 specifies a procedure, including computation, by which a transform between ICC profiles can be adjusted (compensated) to take into account differences between the dark end of the source colour space and the dark end of the destination colour space. This is referred to as black point compensation (BPC). The relative colorimetric encoding of ICC profile transforms already provides a mechanism for such adjustment of the light (white) end of the tone scale.

    • sale 15% off
    • Standard
      14 pages
      English language
    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the requirements for measurement of electrical, photometric, and colorimetric quantities of LED lamps, modules, light engines and luminaires, for operation with AC or DC supply voltages, possibly with associated control gear. Photometric and colorimetric quantities covered in this standard include total luminous flux, luminous efficacy, partial luminous flux, luminous intensity distribution, centre-beam intensities, luminance and luminance distribution, chromatic...view more

    • sale 10% off
    • Standard
      71 pages
      English language
    • e-Library read for
      1 day

This document specifies methods of calculating the tristimulus values of colour stimuli for which
the spectral distributions are provided. These colour stimuli can be produced by self-luminous light
sources or by reflecting or transmitting objects.
This document requires that the colour stimulus function be tabulated at measurement intervals of
5 nm or less in a wavelength range of at least 380 nm to 780 nm. Extrapolation methods are suggested
for cases where the measured wavelength range i...
view more

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

This document specifies a method of calculating the coordinates of the CIE 1976 L*a*b* colour space,
including correlates of lightness, chroma and hue. It includes two methods for calculating Euclidean
distances in this space to represent the perceived magnitude of colour differences.
This document is applicable to tristimulus values calculated using colour-matching functions of the
CIE 1931 standard colorimetric system or the CIE 1964 standard colorimetric system. This document
can be used...
view more

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

This document specifies colour-matching functions for use in colorimetry. Two sets of colour-matching
functions are specified.
a) Colour-matching functions for the CIE 1931 standard colorimetric observer.
This set of colour-matching functions is representative of the colour-matching properties of
observers with normal colour vision for visual field sizes of angular subtense from about 1° to
about 4°, for vision at photopic levels of adaptation.
b) Colour-matching functions for the CIE 1964...
view more

    • sale 10% off
    • Standard
      42 pages
      English language
    • e-Library read for
      1 day

This European Standard defines selection ranks for LED Luminaires, and LEDs including OLEDs for the use in aircraft lighting. The size of these ranks is defined by the use of grades. This European Standard is valid for photopic light levels only.

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day

This document specifies methods of calculating the tristimulus values of colour stimuli for which the spectral distributions are provided. These colour stimuli can be produced by self-luminous light sources or by reflecting or transmitting objects.
This document requires that the colour stimulus function be tabulated at measurement intervals of 5 nm or less in a wavelength range of at least 380 nm to 780 nm. Extrapolation methods are suggested for cases where the measured wavelength range is le...
view more

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

This document specifies colour-matching functions for use in colorimetry. Two sets of colour-matching functions are specified.
— Colour-matching functions for the CIE 1931 standard colorimetric observer.
This set of colour-matching functions is representative of the colour-matching properties of observers with normal colour vision for visual field sizes of angular subtense from about 1° to about 4°, for vision at photopic levels of adaptation.
— Colour-matching functions for the CIE 1964 stan...
view more

    • sale 10% off
    • Standard
      42 pages
      English language
    • e-Library read for
      1 day

This document specifies a method of calculating the coordinates of the CIE 1976 L*a*b* colour space, including correlates of lightness, chroma and hue. It includes two methods for calculating Euclidean distances in this space to represent the perceived magnitude of colour differences.
This document is applicable to tristimulus values calculated using colour-matching functions of the CIE 1931 standard colorimetric system or the CIE 1964 standard colorimetric system. This document can be used for...
view more

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the requirements for measurement of electrical, photometric, and colorimetric quantities of LED lamps, modules, light engines and luminaires, for operation with AC or DC supply voltages, possibly with associated control gear. Photometric and colorimetric quantities covered in this standard include total luminous flux, luminous efficacy, partial luminous flux, luminous intensity distribution, centre-beam intensities, luminance and luminance distribution, chromatic...view more

    • sale 10% off
    • Standard
      71 pages
      English language
    • e-Library read for
      1 day

This document specifies a method of calculating the coordinates of the CIE 1976 L*a*b* colour space, including correlates of lightness, chroma and hue. It includes two methods for calculating Euclidean distances in this space to represent the perceived magnitude of colour differences. This document is applicable to tristimulus values calculated using colour-matching functions of the CIE 1931 standard colorimetric system or the CIE 1964 standard colorimetric system. This document can be used for ...view more

    • sale 15% off
    • Standard
      8 pages
      English language
    • sale 15% off
    • Standard
      8 pages
      French language

This document specifies colour-matching functions for use in colorimetry. Two sets of colour-matching functions are specified. — Colour-matching functions for the CIE 1931 standard colorimetric observer. This set of colour-matching functions is representative of the colour-matching properties of observers with normal colour vision for visual field sizes of angular subtense from about 1° to about 4°, for vision at photopic levels of adaptation. — Colour-matching functions for the CIE 1964 standar...view more

    • sale 15% off
    • Standard
      33 pages
      French language
    • sale 15% off
    • Standard
      34 pages
      English language

This document specifies methods of calculating the tristimulus values of colour stimuli for which the spectral distributions are provided. These colour stimuli can be produced by self-luminous light sources or by reflecting or transmitting objects. This document requires that the colour stimulus function be tabulated at measurement intervals of 5 nm or less in a wavelength range of at least 380 nm to 780 nm. Extrapolation methods are suggested for cases where the measured wavelength range is les...view more

    • sale 15% off
    • Standard
      10 pages
      French language
    • sale 15% off
    • Standard
      9 pages
      English language

This document specifies the erythema reference action spectrum, ser(λ), and the standard erythema dose (SED).

    • sale 15% off
    • Standard
      5 pages
      English language

ISO 18314-1:2015 specifies the method for determining the colour coordinates of a paint film. This method is only applicable to paint films that appear to be uniformly of one colour, i.e. monochromatic, when examined with normal vision. Paint films that do not completely hide a non-transparent substrate represent an opaque system and can be measured by using the procedure in this part of ISO 18314.
Luminescent paint films, transparent paint films, and translucent paint films (for example for di...
view more

    • sale 10% off
    • Draft
      9 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

ISO 18314-2:2015 specifies the Saunderson correction for different measurement geometries and the solutions of the Kubelka-Munk equation for hiding and transparent layers. It also specifies methods for the calculations of the tinting strength including the residual colour difference with different criteria and of the hiding power.
The procedures for preparing the samples for these measurements are not part of this part of ISO 18314. They are agreed between the contracting parties or are describ...
view more

    • sale 10% off
    • Draft
      21 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day