91.100.30 - Concrete and concrete products
Concrete and concrete products
Beton. Betonfertigteile
Béton et produits en béton
Beton in betonski izdelki
General Information
This document specifies a procedure for carrying out impressed current electrochemical chloride extraction from chloride bearing concrete in existing structures. It is applicable to atmospherically exposed parts of structures with ordinary reinforcement and/or post-tensioned tendon ducts embedded in concrete. In the latter case, it is essential to verify that there is no risk of hydrogen embrittlement, if necessary by conducting trials and installing monitoring during the treatment.
This docume...view more
- Standard20 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft18 pagesEnglish language
sale 10% off- e-Library read for1 day
This Technical Report explains the reasoning behind the requirements and procedures given in EN 13791 [1] and why some concepts and procedures given in EN 13791:2007 [2] were not adopted in the 2017 revision. The annex comprises worked examples of the procedures given in EN 13791.
- Technical report67 pagesEnglish language
sale 10% off- e-Library read for1 day
- Technical report60 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies requirements for the properties for silica fume, siliceous fly ash and ground granulated blastfurnace slag for use as a type II addition for production of concrete conforming to ISO 22965. Additions according to this document can also be used in mortars and grouts. This document applies to the silica fume which is a by-product of the smelting process used to produce silicon metal and ferro-silicon alloys. Fly ash produced with other types or higher percentages of co-combu...view more
- Standard23 pagesEnglish language
sale 15% off- Draft23 pagesEnglish language
sale 15% off
This part of EN 13230 provides particular design guidance in the following areas:
- derivation of characteristic loads and test loads;
- calculation of characteristic and test bending moments.
The aim of this part of the standard is to give guidance for the preparation of all data to be given by the purchaser to the supplier in accordance with parts 1 to 5 of EN 13230. It applies to all gauges (standard, broad and narrow) as well as to all lengths of sleepers.
This standard gives special cri...view more
- Standard61 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft48 pagesEnglish language
sale 10% off- e-Library read for1 day
This procedure is a method for evaluating the carbonation resistance of concrete using test conditions that accelerate the rate of carbonation. After a period of preconditioning, the test is carried out under controlled exposure conditions using an increased level of carbon dioxide.
NOTE The test under reference conditions takes a minimum of 112 days comprising a minimum age of the specimen prior to conditioning of 28 days, a minimum conditioning period of 14 days and an exposure to increased c...view more
- Standard18 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft16 pagesEnglish language
sale 10% off- e-Library read for1 day
This document provides general principles for the verification and assessment of the performance of concrete structures with the applications of different fibre-reinforced polymer (FRP) systems varying from internal FRP reinforcements/tendons, external FRP tendons, externally bonded FRP sheets/plates, to near-surface mounted FRP reinforcement. It can be used for the international harmonization of the design of un-reinforced, conventionally reinforced, and pre-stressed concrete structures with th...view more
- Standard7 pagesEnglish language
sale 15% off
This part of the EN 13230 series defines additional technical criteria and control procedures as well as specific tolerance limits related to manufacturing and testing prestressed bearers for switches and crossings with a maximum length of 8,5 m.
Bearers longer than 8,5 m are considered as special elements and will comply with FprEN 13230 5:2015.
- Standard21 pagesEnglish language
sale 10% off- e-Library read for1 day
This part of the EN 13230 series defines additional technical criteria and control procedures as well as specific tolerance limits related to manufacturing and testing prestressed bearers for switches and crossings with a maximum length of 8,5 m.
Bearers longer than 8,5 m are considered as special elements and will comply with FprEN 13230 5:2015.
- Standard21 pagesEnglish language
sale 10% off- e-Library read for1 day
This procedure is a method for evaluating the carbonation resistance of concrete using test conditions that accelerate the rate of carbonation. After a period of preconditioning, the test is carried out under controlled exposure conditions using an increased level of carbon dioxide.
NOTE The test under reference conditions takes a minimum of 112 days comprising a minimum age of the specimen prior to conditioning of 28 days, a minimum conditioning period of 14 days and an exposure to increased c...view more
- Standard18 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft16 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies procedures for testing the strength of hardened concrete.
- Standard30 pagesEnglish language
sale 15% off
This document gives the determination of aggregate crushing value (ACV) of aggregates. This gives a relative measure of the resistance of the aggregate crushing under the gradually applied compressive load. The method is applicable to aggregates passing a 14,0 mm test sieve and retained on a 10,0 mm test sieve. For other size fractions, a recommended method is described in Annex A. The aggregate size fraction taken for this test can also be as per the relevant national standards. NOTE Minor vari...view more
- Standard8 pagesEnglish language
sale 15% off
This document describes the Los Angeles test, for determining the resistance to fragmentation of coarse aggregates.
- Standard6 pagesEnglish language
sale 15% off
This document specifies the shape and dimensions of concrete test specimens for strength tests and the methods of making and curing these test specimens.
- Standard21 pagesEnglish language
sale 15% off
This document gives the test method for determination of ten percent fines value (TFV) of aggregates. This method gives a relative measure of the resistance of the aggregate crushing under the gradually applied compressive load. It covers two sets of procedures: — the first procedure is applicable for aggregates tested in dry condition; and — the second procedure is applicable for aggregates tested in a soaked condition. NOTE 1 Generally, the test can be done under dry conditions. However, the e...view more
- Standard9 pagesEnglish language
sale 15% off
This document describes the procedure for determining the creep (total, autogenous (basic) and drying) of hardened concrete test specimens subjected to a sustained longitudinal compressive load.
The test is suitable for specimens having a declared value of D of the coarsest fraction of aggregates actually used in the concrete (Dmax) not greater than 32 mm.
- Standard16 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft13 pagesEnglish language
sale 10% off- e-Library read for1 day
This document covers the method for determining the setting time of concrete with slump greater than zero, by testing mortar sieved from the concrete mixture. The initial setting time and the final setting time are the time intervals required for the mortar sieved from the concrete mixture to reach the specified values of penetration resistance after the initial contact of cement and water. The method can be used for determining the effect of variables such as temperature, type and content of ce...view more
- Standard5 pagesEnglish language
sale 15% off
This document specifies the requirements for the performance of compression testing machines for the measurement of the compressive strength of concrete.
- Standard16 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft15 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies a method for determining the flexural and compressive strength of moulded mortar specimens. This document is applicable to cement/air-lime mortars, air-lime mortars, mortars with hydraulic binders and retarded mortars.
- Standard15 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft15 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies the procedure for the determination of total shrinkage of concrete specimens in drying conditions.
NOTE 1 Possible shrinkage or length changes occurring before 24 h of age, and which may have significant amplitude and/or consequences, e.g. for high performance concrete and/or in case of restraint, may need to be measured according to a complementary procedure not covered by the present standard.
NOTE 2 Information on a simplified procedure for the determination of autog...view more
- Standard13 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft12 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies a method for taking cores from hardened concrete, their examination, preparation for testing and determination of compressive strength. This document does not give guidance on the decision to drill cores or on the locations for drilling and does not provide procedures for interpreting the core strength results. It is recommended that before coring, full agreement should be reached by all parties on the need for core testing and how the results should be interpreted.
- Standard7 pagesEnglish language
sale 15% off