ASTM D846-84

Specification for Ten-Degree Xylene (Withdrawn 1989)

General Information

• Status: Withdrawn
• Withdrawal Date: 07-Jul-1989
• ICS: 87.060.30 - Solvents
• Technical Committee: D16 - Aromatic, Industrial, Specialty and Related Chemicals
• Drafting Committee: D16.01 - Benzene, Toluene, Xylenes, Cyclohexane and Their Derivatives

Standards Content (Sample)

ASTM D89b 84 0759510 0037725 €i
3
. AMERICAN SOCIETV FOR TESTINQ ANDMATERIAI+
1916 RaœSt.,Phil#idph¡b,Pa. 19103
Reprinted from the Annual Book of ASlM StatKhrds, Copyriglit ASTM
If not listed in the current combined index, will appear in the next edition.
Standard Specification for
TEN-DEGREE XYLENE'S *
This standard is issued under the hed designation D 846, the number immediately foilowing the designation indicates the year of
original adoption or, in the case. of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsiion (e) indicates an editorial changesince the last revision or rappmal
This spec@ention has been approved for use by agencies of the Department of Defme and for listing in the DoD Index of
Spec@caiions and Si&&.
Color not darker than 20 max on piati-
1. scope
numaMt scale (Test Method
1.1 This specification covers tendegree xy-
D 1209)
lene. Distillation range at 760
mm, Hg presure:
Total distillation range not more than 10%
2. Applicable Documents
initial distilation tem- not below 135%
2.1 ASTMStandards: perature (tirst dmp)
Dry point not above 145%
D847 Test Method for Acidity of Benzene,
Acid wash color not darker than No. 6 color stand-
Toluene, Xylenes, Solvent Naphthas, and
ard
Similar Industrial Aromatic'
Acidity no free acid; that is, no endence
of acidity
D 848 Test Method for Acid Wash Color of
Sulfur compounds free of HIS and Sa
Industrial Aromatic Hydrocarbons3
Copper corrosion copper strip shall not show irides-
D 849 Test Method for Copper Corrosion of
cence nor a gray or black de-
posit or discoloration
Industrial Aromatic Hydrocarbons3
D850 Method for Distillation of Industrial
Aromatic Hydrocarbons and Related
4. Test Methods
Materiais'
4.1 The material shall be sampled and the
D 853 Test Method for Hydrogen Sulfide and
properties enumerated in this specification shaii
Sulfur Dioxide Content (Qualitative) of In-
be determined in accordance with the following
dustrial Aromatic Hydrocarbons'
ASTM methods:
D 1209 Test Method for Color of Clear Liq-
4.1.1 Sampling-Practice D 3437.
uids (Platinum-Cobalt Scale)'
4.1.2 Appearance-Visuai inspection.
D 3437 Practice for Sampling and Handling
4.1.3 Specijìc GravitpTest Method D 3505.
. Cyclic Products3
4.1.4 Color-Test Method D 1209.
D 3505 Test Method for Density or Specific
4.1.5 Distillation-Method D 850 using an
Gravity of Pure Liquid Chemicals3
ASTM Solvents Distillation Thermometer 41C
E 1 Specification for ASTM Thermometers4
ha
...