ASTM D4835-08(2012)

Standard Specification for Propylene Glycol Monomethyl Ether Acetate (Withdrawn 2021)

ABSTRACT
This specification establishes the properties and requirements for propylene glycol monomethyl ether acetate (PMA). The specimens shall be adequately sampled and undergo gas chromatographic chemical analysis, and shall adhere accordingly to chemical property requirements as to purity, color (platinum-cobalt scale), water content, distillation range (initial and dry boiling points), acidity (free acid as acetic acid), and glycol ether content.
SCOPE
1.1 This specification covers propylene glycol monomethyl ether acetate (PMA). Note 1—Propylene glycol monomethyl ether acetate (PMA) is a mixture of 1-methoxy-2-acetoxypropane and 2-methoxy-1-acetoxypropane.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.4 For specific hazard information and guidance, consult the supplier's Material Safety Data Sheet for materials listed in this standard.
WITHDRAWN RATIONALE
This specification covered propylene glycol monomethyl ether acetate (PMA).
Formerly under the jurisdiction of Committee D01 on Paint and Related Coatings, Materials, and Applications, this specification was withdrawn in January 2021 in accordance with section 10.6.3 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

General Information

• Status: Withdrawn
• Publication Date: 31-Oct-2012
• Withdrawal Date: 25-Jan-2021
• ICS: 71.080.60 - Alcohols. Ethers
• Technical Committee: D01 - Paint and Related Coatings, Materials, and Applications
• Drafting Committee: D01.35 - Solvents, Plasticizers, and Chemical Intermediates

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:D4835 −08 (Reapproved 2012)
Standard Specification for
1
Propylene Glycol Monomethyl Ether Acetate
This standard is issued under the fixed designation D4835; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope* D5386 Test Method for Color of Liquids Using Tristimulus
Colorimetry
1.1 This specification covers propylene glycol monomethyl
E29 Practice for Using Significant Digits in Test Data to
ether acetate (PMA).
Determine Conformance with Specifications
NOTE 1—Propylene glycol monomethyl ether acetate (PMA) is a
E300 Practice for Sampling Industrial Chemicals
mixture of 1-methoxy-2-acetoxypropane and 2-methoxy-1- 3
2.2 U.S. Federal Specification:
acetoxypropane.
PPP-C-2020 Chemicals, Liquid, Dry, and Paste: Packaging
1.2 The values stated in SI units are to be regarded as
of
standard. No other units of measurement are included in this
3. Properties
standard.
3.1 Propyleneglycolmonomethyletheracetate(PMA)shall
1.3 The following applies to all specified limits in this
conform to the following requirements:
standard; for purposes of determining conformance with this
standard, an observed value or a calculated value shall be
Purity, min, weight % 99
Color, platinum-cobalt scale, max (Note 2) 15
rounded off “to the nearest unit” in the last right-hand digit
Water, max, weight % 0.05
used in expressing the specification limit, in accordance with
Distillation range, °C:
the rounding-off method of Practice E29. Initial boiling point, min 140
Dry boiling point, max 150
1.4 For specific hazard information and guidance, consult A
Acidity (free acid as acetic acid), max, weight % 0.02
Glycol ether, max, weight % 0.5
the supplier’s Material Safety Data Sheet for materials listed in
this standard.
A
Equivalent to 0.2 mg of potassium hydroxide (KOH) per gram of specimen.
2. Referenced Documents
NOTE 2—Instrumental Pt-Co color determined by Test Method D5386
2
have been shown to have no statistically significant difference from Pt-Co
2.1 ASTM Standards:
color determined by Test Method D1209. However, it is not known
D1078 Test Method for Distillation Range of Volatile Or-
whether propylene glycol monomethyl ether acetate was part of the
ganic Liquids
sample set included in the interlaboratory study.
D1209 Test Method for Color of Clear Liquids (Platinum-
4. Sampling
Cobalt Scale)
D1364 Test Method for Water in Volatile Solvents (Karl
4.1 The material shall be sampled in accordance with
Fischer Reagent Titration Method)
Practice E300.
D1613 Test Method for Acidity in Volatile Solvents and
5. Test Methods
Chemical Intermediates Used in Paint, Varnish, Lacquer,
and Related Products 5.1 The properties enumerated in this specification shall be
D4773 Test Method for Purity of Propylene Glycol Monom-
determined in accordance with the following ASTM test
ethyl Ether, Dipropylene Glycol Monomethyl Ether, and methods:
Propylene Glycol Monomethyl Ether Acetate
5.1.1 Gas Chromatographic Method—Test Method D4773.
5.1.2 Color—Test Method D1209 (see Note 2).
5.1.3 Water—T
...