ASTM D1007-11(2019)
(Specification)Standard Specification for sec-Butyl Alcohol,
Standard Specification for <emph type="bdit">sec</emph>-Butyl Alcohol<sup>,</sup>
ABSTRACT
This specification establishes the properties and requirements for sec-butyl alcohol for use in paint, varnish, lacquer, and related products. Specimens shall be sampled and tested as appropriate, and shall adhere to the following requirements: apparent specific gravity; color (Pt-Co scale); distillation range (initial boiling point and dry point); nonvolatile matter; water; and acidity as acetic acid.
SCOPE
1.1 This specification covers sec-butyl alcohol for use in paint, varnish, lacquer, and related products.
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 The following applies to all specified limits in this standard: for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.
1.4 For hazard information and guidance, see the supplier's Material Safety Data Sheet.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
Relations
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: D1007 −11 (Reapproved 2019)
Standard Specification for
1,2
sec-Butyl Alcohol
This standard is issued under the fixed designation D1007; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope vents for Use in Paint, Varnish, Lacquer, and Related
Products
1.1 This specification covers sec-butyl alcohol for use in
D1364 Test Method for Water in Volatile Solvents (Karl
paint, varnish, lacquer, and related products.
Fischer Reagent Titration Method)
1.2 The values stated in SI units are to be regarded as
D1613 Test Method for Acidity in Volatile Solvents and
standard. No other units of measurement are included in this
Chemical Intermediates Used in Paint, Varnish, Lacquer,
standard.
and Related Products
D4052 Test Method for Density, Relative Density, and API
1.3 The following applies to all specified limits in this
standard: for purposes of determining conformance with this Gravity of Liquids by Digital Density Meter
D5386 Test Method for Color of Liquids Using Tristimulus
standard, an observed value or a calculated value shall be
rounded off “to the nearest unit” in the last right-hand digit Colorimetry
E29 Practice for Using Significant Digits in Test Data to
used in expressing the specification limit, in accordance with
the rounding-off method of Practice E29. Determine Conformance with Specifications
E300 Practice for Sampling Industrial Chemicals
1.4 For hazard information and guidance, see the supplier’s
Material Safety Data Sheet. 2.2 U.S. Federal Specification:
PPP-C-2020 Chemicals, Liquid, Dry, and Paste: Packaging
1.5 This international standard was developed in accor-
of
dance with internationally recognized principles on standard-
ization established in the Decision on Principles for the
3. Properties
Development of International Standards, Guides and Recom-
mendations issued by the World Trade Organization Technical 3.1 sec-butylalcoholshallconformtothefollowingrequire-
Barriers to Trade (TBT) Committee.
ments:
Apparent specific gravity:
2. Referenced Documents
20/20 °C 0.807 to 0.809
or
2.1 ASTM Standards:
25/25 °C 0.804 to 0.806
A
D268 Guide for Sampling and Testing Volatile Solvents and Color, Pt-Co scale, max 10
Distillation range, 760 mmHg, °C as:
Chemical Intermediates for Use in Paint and Related
Initial boiling point, min 98.0
Coatings and Material
Dry point, max 101.0
D1078 Test Method for Distillation Range of Volatile Or- Nonvolatile matter, max, mg/100 mL 5
Water, max, weight % 0.5
ganic Liquids
B
Acidity, as acetic acid, max, weight % 0.002
D1209 Test Method for Color of Clear Liquids (Platinum-
Cobalt Scale) A
Instrumental Pt-Co color determined by Test Method D5386 has been shown to
D1353 Test Method for Nonvolatile Matter in Volatile Sol- have no statistically significant difference from Pt-Co color determined by Test
Method D1209. However, it is not known whether sec-butyl alcohol was part of the
sample set included in the interlaboratory study.
B
Equivalent to 0.019 mg of KOH per gram of sample.
This specification is under the jurisdictio
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.