iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM A144-04(2014)

(Specification)

Standard Specification for Ferrotungsten

Standard Specification for Ferrotungsten

ABSTRACT
This guide covers standard specification for several grades of ferrotungsten. The material shall conform to the required chemical composition for tungsten, carbon, phosphorus, sulfur, silicon, molybdenum, and aluminum. The material shall also conform to supplementary chemical requirements for manganese, copper, nickel, arsenic, antimony, tin, and bismuth. Various grades of steel shall be available in specified sizes that meet the required size tolerance.
SCOPE
1.1 This specification covers four grades of ferrotungsten.

General Information

Status
Historical
Publication Date
30-Sep-2014
ICS
77.120.99 - Other non-ferrous metals and their alloys
Technical Committee
A01 - Steel, Stainless Steel and Related Alloys
Drafting Committee
A01.18 - Castings
Current Stage
Ref Project

Relations

Replaces
ASTM A144-04(2009) - Specification for Ferrotungsten
Effective Date
01-Oct-2014
Replaced By
ASTM A144-04(2019) - Standard Specification for Ferrotungsten
Effective Date
01-Nov-2019

Buy Standard

ASTM A144-04(2014) - Standard Specification for FerrotungstenASTM A144-04(2014) - Standard Specification for Ferrotungsten
PreviousNext
Technical specification
ASTM A144-04(2014) - Standard Specification for Ferrotungsten
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ASTM A144-04(2014) - Standard Specification for FerrotungstenREDLINE ASTM A144-04(2014) - Standard Specification for Ferrotungsten
PreviousNext
Technical specification
REDLINE ASTM A144-04(2014) - Standard Specification for Ferrotungsten
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:A144 −04 (Reapproved 2014)
Standard Specification for
1
Ferrotungsten
This standard is issued under the fixed designation A144; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope mentary requirements that are indicated in the purchase order.
Failure to comply with the general requirements of Specifica-
1.1 This specification covers four grades of ferrotungsten.
tion A1025 constitutes nonconformance with this specification.
In case of conflict between the requirements of this specifica-
2. Referenced Documents
tion and Specification A1025, this specification shall prevail.
2
2.1 ASTM Standards:
A1025 Specification for Ferroalloys and Other Alloying
4. Chemical Composition
Materials, General Requirements
4.1 The material shall conform to the requirements as to
chemical composition specified in Tables 1 and 2.
3. General Conditions for Delivery
4.2 The manufacturer shall furnish an analysis of each
3.1 Materials furnished to this specification shall conform to
shipment showing the percentage of each element specified in
the requirements of Specification A1025, including any supple-
Table 1.The manufacturer shall supply on request the results of
an analysis for the elements in Table 2, on a cumulative basis
1
over a period mutually agreed upon between the manufacturer
This specification is under the jurisdiction of ASTM Committee A01 on Steel,
Stainless Steel and Related Alloys and is the direct responsibility of Subcommittee
and the purchaser.
A01.18 on Castings.
Current edition approved Oct. 1, 2014. Published October 2014. Originally
5. Size
approved in 1932. Discontinued in 2000 and reinstated in 2002 as A144 - 02. Last
5.1 The various grades are available in the sizes listed in
previous edition approved in 2009 as A144 - 04(2009). DOI: 10.1520/A0144-
04R14.
Table 3.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
6. Keywords
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website. 6.1 ferroalloy; ferrotungsten
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Pag
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: A144 − 04 (Reapproved 2009) A144 − 04 (Reapproved 2014)
Standard Specification for
1
Ferrotungsten
This standard is issued under the fixed designation A144; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This specification covers four grades of ferrotungsten.
2. Referenced Documents
2
2.1 ASTM Standards:
A1025 Specification for Ferroalloys and Other Alloying Materials, General Requirements
3. General Conditions for Delivery
3.1 Materials furnished to this specification shall conform to the requirements of Specification A1025, including any
supplementary requirements that are indicated in the purchase order. Failure to comply with the general requirements of
Specification A1025 constitutes nonconformance with this specification. In case of conflict between the requirements of this
specification and Specification A1025, this specification shall prevail.
4. Chemical Composition
4.1 The material shall conform to the requirements as to chemical composition specified in Tables 1 and 2.
4.2 The manufacturer shall furnish an analysis of each shipment showing the percentage of each element specified in Table 1.
The manufacturer shall supply on request the results of an analysis for the elements in Table 2, on a cumulative basis over a period
mutually agreed upon between the manufacturer and the purchaser.
5. Size
5.1 The various grades are available in the sizes listed in Table 3.
6. Keywords
6.1 ferroalloy; ferrotungsten
1
This specification is under the jurisdiction of ASTM Committee A01 on Steel, Stainless Steel and Related Alloys and is the direct responsibility of Subcommittee A01.18
on Castings.
Current edition approved Oct. 1, 2009Oct. 1, 2014. Published January 2010October 2014. Originally approved in 1932. Discontinued in 2000 and reinstated in 2002 as
A144 - 02. Last previous edition approved in 20042009 as A144 - 04.A144 - 04(2009). DOI: 10.1520/A0144-04R09.10.1520/A0144-04R14.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM A495-06(2020)(Specification)
Standard Specification for Calcium-Silicon Alloys

ABSTRACT
This specification covers a standard grade of calcium-silicon, a standard grade of calcium-manganese-silicon, a standard grade of calcium-silicon-barium and a standard grade of ferro-calcium-silicon. The material shall conform to the requirements as to chemical composition specified.
SCOPE
1.1 This specification covers a standard grade of calcium-silicon, a standard grade of calcium-manganese-silicon, a standard grade of calcium-silicon-barium, and a standard grade of ferro-calcium-silicon.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM A922-05(2020)(Specification)
Standard Specification for Silicon Metal

ABSTRACT
This specification covers different sizes of several grades of silicon metal. The metal shall undergo chemical analysis and shall conform to specified chemical composition requirements.
SCOPE
1.1 This specification covers several grades of silicon metal.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. The SI equivalents of inch-pound units given may be approximate.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM A144-04(2019)(Specification)
Standard Specification for Ferrotungsten

ABSTRACT
This guide covers standard specification for several grades of ferrotungsten. The material shall conform to the required chemical composition for tungsten, carbon, phosphorus, sulfur, silicon, molybdenum, and aluminum. The material shall also conform to supplementary chemical requirements for manganese, copper, nickel, arsenic, antimony, tin, and bismuth. Various grades of steel shall be available in specified sizes that meet the required size tolerance.
SCOPE
1.1 This specification covers four grades of ferrotungsten.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM E439-23(Test Method)
Standard Test Methods for Chemical Analysis of Beryllium

SIGNIFICANCE AND USE
4.1 These test methods for the chemical analysis of beryllium metal are primarily intended as referee methods to test such materials for compliance with compositional specifications. It is assumed that all who use these test methods will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory.
SCOPE
1.1 These test methods cover the chemical analysis of beryllium having chemical compositions within the following limits:    
Element  
Range, %  
Aluminum  
0.05 to 0.30  
Beryllium  
97.5 to 100    
Beryllium Oxide  
0.3 to 3    
Carbon  
0.05 to 0.30  
Copper  
0.005 to 0.10  
Chromium  
0.005 to 0.10  
Iron  
0.05 to 0.30  
Magnesium  
0.02 to 0.15  
Nickel  
0.005 to 0.10  
Silicon  
0.02 to 0.15  
1.2 The test methods in this standard are contained in the sections as follows.    
Sections  
Chromium by the Diphenylcarbazide Spectrophotometric Test Method
[0.004 % to 0.04 %]  
10 – 19  
Iron by the 1,10-Phenanthroline Spectrophotometric Test Method
[0.05 % to 0.25 %]  
20 – 29  
Manganese by the Periodate Spectrophotometric Test Method
[0.008 % to 0.04 %]  
30 – 39  
Nickel by the Dimethylglyoxime Spectrophotometric Test Method
[0.001 % to 0.04 %]  
40 – 49  
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    English language
    sale 15% off
ASTM
ASTM E3097-23(Test Method)
Standard Test Method for Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys

SIGNIFICANCE AND USE
5.1 Constant force thermal cycling tests determine the effect of stress on the transformation temperatures, recovered strain and residual strain of a shape memory alloy. The tests may be for one thermal cycle. A standard test method for force controlled repeated thermal cycling of shape memory alloys is currently under development.  
5.2 Measurement of the specimen's thermomechanical behavior closely parallels many shape memory applications and provides a result that is applicable to the function of the material.  
5.3 This test method may be used for, but is not limited to, wire, round tube, or strip samples. Thus it is able to provide an assessment of the product in its semi-finished form.  
5.4 This test method provides a simple method for determining transformation temperatures by heating and cooling specimens through their full thermal transformation under force.  
5.5 This test method can be used on trained and processed material in a semi-finished form to measure Two Way Shape Memory Effect by comparing the strain in the austenite state and martensite states with no minimal applied stress. The force is set to a minimum value not to exceed a corresponding stress of 7 MPa (in accordance Test Method F2516).  
5.6 This test method is useful for quality control, specification acceptance, and research.  
5.7 Transformation temperatures derived from this test method may not agree with those obtained by other test methods due to the effects of strain and stress on the transformation.  
5.8 Components such as springs or other semi-finished parts can be tested using this method as agreed upon by the customer and supplier. Units of stress and strain can be replaced with force and displacement.
SCOPE
1.1 This test method defines procedures for thermomechanical cycling of shape memory alloy (SMA) material and components under constant force. This method characterizes the transformation properties such as transformation temperatures, actuation strain and residual strain, when a SMA is thermally cycled through the phase transformation under a constant applied force. This test is done to provide data for the selection of SMA materials, quality control, design allowables and actuator design.  
1.2 Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    English language
    sale 15% off
ASTM
ASTM B561-23(Specification)
Standard Specification for Refined  Platinum

ABSTRACT
This specification covers refined platinum as sponge, cast bar, and wrought forms in two grades as follows: Grade 99.95 and Grade 99.99. The refined platinum shall conform to the required chemical composition for platinum, rhodium, palladium, ruthenium, iridium, gold, silver, lead, tin, zinc, iron, manganese, copper, silicon, calcium, magnesium, aluminum, nickel, chromium, antimony, arsenic, bismuth, tellurium, cadmium, and molybdenum. The metal may be produced by refining process that yields a product capable of meeting the chemical requirements of this specification.
SCOPE
1.1 This specification covers refined platinum as sponge, cast bar, and wrought forms (Note 1) in two grades as follows:  
1.1.1 Grade 99.95 (UNS PO4995)—Platinum having a purity of 99.95 %, min, and  
1.1.2 Grade 99.99—Platinum having a purity of 99.99 % min.  
Note 1: Other forms of unfabricated platinum of commerce are not to be excluded under this specification.
Note 2: For the purposes of determining conformance with this specification, an observed value obtained from analysis shall be rounded to the nearest unit in the last right hand place of figures used in expressing the limiting value, in accordance with the rounding off method of Practice E29.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM B717-23(Specification)
Standard Specification for Refined Ruthenium

ABSTRACT
This specification covers refined ruthenium as sponge and powder in one grade as follows: Grade 99.80 and Grade 99.90. The material may be produced by any refining process that yields a product capable of meeting the chemical requirements of this specification. The material should conform to the requirements for chemical composition as prescribed.
SCOPE
1.1 This specification covers refined ruthenium as sponge and powder in one grade as follows:  
1.1.1 Grade 99.80—Ruthenium having a purity of 99.80 %.  
1.1.2 Grade 99.90—Ruthenium having a purity of 99.90 %.  
Note 1: For the purposes of determining conformance with this specification, an observed value obtained from analysis shall be rounded to the nearest unit in the last right-hand place of figures used in expressing the limiting value in accordance with the rounding method of Practice E29.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM B664-18(2023)(Specification)
Standard Specification for 80 % Silver-20 % Graphite Sliding Contact Material

ABSTRACT
This specification defines the criteria for composition and other requirements for sliding contact materials or brushes with a nominal composition by weight of 20% silver and 80% graphite. Materials shall adhere to specified requirements for chemical composition, density, shear strength, and microstructure. They shall also conform to typical values of Rockwell superficial hardness and specific resistance.
SCOPE
1.1 This specification defines the criteria for composition and other requirements for brushes with a nominal silver content of 80 %, by weight, with the balance being substantially graphite.  
1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar will all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM B616-23(Specification)
Standard Specification for Refined Rhodium

ABSTRACT
This specification covers refined rhodium as sponge and powder in three grades, namely: Grade 99.80, Grade 99.90, and Grade 99.95. The material may be produced by any refining process that will yield a product capable of meeting the chemical composition requirements specified for rhodium, platinum, iridium, palladium, ruthenium, lead, tin, zinc, arsenic, bismuth, cadmium, iron, silicon, silver, gold, copper, nickel, tellurium, magnesium, calcium, aluminum, chromium, manganese, antimony, cobalt, and boron determined by chemical analysis. Sampling requirements for the metal sponge and powder are detailed.
SCOPE
1.1 This specification covers refined rhodium as sponge and powder in three grades as follows:  
1.1.1 Grade 99.80—Rhodium having a purity of 99.80 %,  
1.1.2 Grade 99.90—Rhodium having a purity of 99.90 %, and  
1.1.3 Grade 99.95—Rhodium having a purity of 99.95 %.  
1.1.4 For the purposes of determining conformance with this specification, an observed value obtained from analysis shall be rounded to the nearest unit in the last right-hand place of figures used in expressing the limiting value, in accordance with the rounding method of Practice E29.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM B692-18(2023)(Specification)
Standard Specification for 75 % Silver-25 % Graphite Sliding Contact Material

ABSTRACT
This specification defines the criteria for the chemical composition and other requirements (including physical properties, microstructure, superficial hardness, and specific resistance ) for silver-graphite brushes for sliding electrical contacts. The percentage of silver, graphite, ash in graphite, and total metal impurities are prescribed. The minimum acceptable values for the physical properties such as density, determined by measurement and weight method, and shear strength are given. Typical Rockwell hardness and specific resistance for the material are also specified.
SCOPE
1.1 This specification defines the criteria for composition and other requirements for brushes with a nominal silver content of 75 weight % with the balance being substantially graphite.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off