iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM D1843-63(1998)

(Specification)

Standard Specification for Fractionated and Distilled Cottonseed Fatty Acids (Withdrawn 2007)

Standard Specification for Fractionated and Distilled Cottonseed Fatty Acids (Withdrawn 2007)

SCOPE
1.1 This specification covers distilled acids derived from cottonseed oil. Three types are covered as follows:  
1.1.1 Type I -Highly fractionated fatty acids usually produced from recovered cottonseed oil.  
1.1.2 Type II -Fractionated fatty acids usually produced from recovered cottonseed oil.  
1.1.3 Type III -Usually produced from recovered cottonseed oil.
WITHDRAWN RATIONALE
This specification covers distilled acids derived from cottonseed oil. Three types are covered as follows: Type I-highly fractionated fatty acids usually produced from recovered cottonseed oil, Type II-fractionated fatty acids usually produced from recovered cottonseed oil, and Type III-usually produced from recovered cottonseed oil.
Formerly under the jurisdiction of Committee D01 on Paint and Related Coatings, Materials, and Applications, this specification was withdrawn in March 2007 in accordance with section 10.5.3.1 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

General Information

Status
Withdrawn
Publication Date
09-May-1998
Withdrawal Date
19-Mar-2007
ICS
71.080.40 - Organic acids
Technical Committee
D01 - Paint and Related Coatings, Materials, and Applications
Current Stage
Ref Project

Buy Standard

ASTM D1843-63(1998) - Standard Specification for Fractionated and Distilled Cottonseed Fatty Acids (Withdrawn 2007)ASTM D1843-63(1998) - Standard Specification for Fractionated and Distilled Cottonseed Fatty Acids (Withdrawn 2007)
PreviousNext
Technical specification
ASTM D1843-63(1998) - Standard Specification for Fractionated and Distilled Cottonseed Fatty Acids (Withdrawn 2007)
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: D 1843 – 63 (Reapproved 1998)
Standard Specification for
Fractionated and Distilled Cottonseed Fatty Acids
This standard is issued under the fixed designation D 1843; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope (Gardner Color Scale)
D 1959 Test Method for Iodine Value of Drying Oils and
1.1 This specification covers distilled acids derived from
Fatty Acids
cottonseed oil. Three types are covered as follows:
D 1962 Test Method for Saponification Value of Drying
1.1.1 Type I—Highly fractionated fatty acids usually pro-
Oils, Fatty Acids, and Polymerized Fatty Acids
duced from recovered cottonseed oil.
D 1965 Test Method for Unsaponifiable Matter in Drying
1.1.2 Type II—Fractionated fatty acids usually produced
Oils, Fatty Acids, and Polymerized Fatty Acids
from recovered cottonseed oil.
D 1980 Test Method for Acid Value of Fatty Acids and
1.1.3 Type III—Usually produced from recovered cotton-
Polymerized Fatty Acids
seed oil.
D 1982 Test Method for Titer of Fatty Acids
2. Referenced Documents
3. Properties
2.1 ASTM Standards:
3.1 Fractionated and distilled cottonseed fatty acids shall
D 1467 Guide for Testing Fatty Acids Used in Protective
conform to the requirements in Table 1.
Coatings
D 1544 Test Method for Color of Transparent Liquids
4. Test Methods
4.1 The properties enumerated in this specification shall be
determined in accordance with Methods D 1467.
This specification is under the jurisdiction of ASTM Committee D-1 on Paint
5. Keywords
and Related Coatings, Materials, andApplications and is the direct responsibility of
Subcommittee D01.32 on Drying Oils. 5.1 cottonseed oil; fatty acids
Current edition accepte
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM D1240-24(Test Method)
Standard Test Methods for Rosin Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products

SIGNIFICANCE AND USE
4.1 This is a revision of the method for measuring rosin acids content combines the three major ways of determining the rosin acids content of pine chemicals products into a single method.  
4.1.1 For materials containing less than 15 % rosin, the modified Glidden procedure has gained acceptance. For materials containing more than 15 % rosin the modified Wolfe Method is preferred. The modified Wolfe and modified Glidden procedures differ only in their details. They have been combined here into a single procedure. This procedure can be run using either a potentiometer or an internal indicator to determine the end point of the titration. Use of a potentiometer is preferred and is the referee method. Use of an internal indicator is the principal alternative method. They will be referred to as the Potentiometric Method and the Internal Indicator Method.
SCOPE
1.1 These test methods cover the determination of rosin acids in tall oil, tall oil fatty acid, tall oil rosin, and other pine chemicals products.  
1.2 These test methods may not be applicable to adducts or derivatives of rosin, fatty acid, or other pine chemicals products.  
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 15% off
ASTM
ASTM D3620-04(2023)(Specification)
Standard Specification for Glacial Acetic Acid

ABSTRACT
This specification covers glacial acetic acid for use in paint, varnish, lacquer, and related products. Glacial acetic acid shall be tested for purity, freezing point, color, water content, iron content, acetaldehyde content, and formic acid content, and shall conform to the requirements of the specification. Test methods, sampling, and packaging shall be in accordance with ASTM standard methods.
SCOPE
1.1 This specification covers glacial (99.8 %) acetic acid for use in paint, varnish, lacquer, and related products.  
1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 For specific hazard information and guidance, see the supplier’s Safety Data Sheet for materials listed in this specification.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D4416-09(2023)(Specification)
Standard Specification for Acrylic Acid

ABSTRACT
This specification covers glacial acrylic acid (99.0% grade) for use in paint, varnish, lacquer and related products. The properties of the material shall be determined in accordance with the following test methods: purity; water; color; inhibitor; and dimer.
SCOPE
1.1 This specification covers glacial acrylic acid2 (99.0 % grade) for use in paint, varnish, lacquer and related products.  
1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 For hazard information and guidance, see the supplier’s Safety Data Sheet.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 6.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D3546-05(2019)(Test Method)
Standard Test Method for Formic Acid in Glacial Acetic Acid

SIGNIFICANCE AND USE
4.1 This test method is useful for determining the formic acid content of glacial acetic acid by chemical means.  
4.2 Low molecular weight organic acids (such as acetic and propionic), aldehydes (including formaldehyde and acetaldehyde), ketones, and alcohols (including methyl alcohol) do not interfere with the test.  
4.3 Formic acid (and other reducing substances) may be present as a result of contamination during storage, distribution, and manufacture. This test method may be used in assessing compliance with a specification.
SCOPE
1.1 This test method covers the determination of the formic acid (and other reducing substances) content of glacial acetic acid by oxidation with lead tetraacetate.2  
1.2 For purposes of determining conformance of an observed or a calculated value using this test method to relevant specifications, test result(s) shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 For hazard information and guidance, see the supplier's Material Safety Data Sheets.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D7884-24(Test Method)
Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography

SIGNIFICANCE AND USE
4.1 The presence of 4-CBA and p-TOL in PTA used for the production of polyester is undesirable because they can affect the PET quality (such as contribute to fiber breaks), the polymerization process, and 4-CBA imparts coloration to the polymer due to thermal instability.  
4.2 Determining the amount of 4-CBA and p-TOL remaining from the manufacture of PTA is often required. This test method is suitable for setting specifications and for use as an internal quality control tool where these products are produced or are used.
SCOPE
1.1 This test method covers the determination of the 4-Carboxybenzaldehyde (4-CBA) and p-Toluic acid (p-TOL) in purified terephthalic acid (PTA) by reverse phase high performance liquid chromatography (HPLC). This method is applicable for 4-CBA and p- TOL with an upper limit of 500 mg/kg, respectively, but may be applicable to a wider range.  
1.2 In determining the conformance of the test results using this method to applicable specification, results shall be rounded off in accordance with the rounding-off method of Practice E29.  
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.For specific hazard statements, see Section 7.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
ASTM
ASTM D1240-24(Test Method)
Standard Test Methods for Rosin Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products

SIGNIFICANCE AND USE
4.1 This is a revision of the method for measuring rosin acids content combines the three major ways of determining the rosin acids content of pine chemicals products into a single method.  
4.1.1 For materials containing less than 15 % rosin, the modified Glidden procedure has gained acceptance. For materials containing more than 15 % rosin the modified Wolfe Method is preferred. The modified Wolfe and modified Glidden procedures differ only in their details. They have been combined here into a single procedure. This procedure can be run using either a potentiometer or an internal indicator to determine the end point of the titration. Use of a potentiometer is preferred and is the referee method. Use of an internal indicator is the principal alternative method. They will be referred to as the Potentiometric Method and the Internal Indicator Method.
SCOPE
1.1 These test methods cover the determination of rosin acids in tall oil, tall oil fatty acid, tall oil rosin, and other pine chemicals products.  
1.2 These test methods may not be applicable to adducts or derivatives of rosin, fatty acid, or other pine chemicals products.  
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 15% off
ASTM
ASTM D5559-95(2023)(Test Method)
Standard Test Method for Determination of Acidity as Free Fatty Acids/Acid Number in the Absence of Ammonium or Triethanolamine Soaps in Sulfonated and Sulfated Oils

SIGNIFICANCE AND USE
2.1 This test method is intended for use in the determination of the acidity as free fatty acids in the absence of ammonium or triethanolamine soaps in sulfonated and sulfated oils for the purpose of quality assurance.
SCOPE
1.1 This test method covers the determination of the acidity as free fatty acids existing in a sample of sulfonated or sulfated oil, or both, by titrating the sample dissolved in a solvent. It is not applicable in the presence of ammonium or triethanolamine soaps or salts or other compounds that do not react neutral to phenolphthalein when dissolved in alcohol.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D3620-04(2023)(Specification)
Standard Specification for Glacial Acetic Acid

ABSTRACT
This specification covers glacial acetic acid for use in paint, varnish, lacquer, and related products. Glacial acetic acid shall be tested for purity, freezing point, color, water content, iron content, acetaldehyde content, and formic acid content, and shall conform to the requirements of the specification. Test methods, sampling, and packaging shall be in accordance with ASTM standard methods.
SCOPE
1.1 This specification covers glacial (99.8 %) acetic acid for use in paint, varnish, lacquer, and related products.  
1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 For specific hazard information and guidance, see the supplier’s Safety Data Sheet for materials listed in this specification.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D4416-09(2023)(Specification)
Standard Specification for Acrylic Acid

ABSTRACT
This specification covers glacial acrylic acid (99.0% grade) for use in paint, varnish, lacquer and related products. The properties of the material shall be determined in accordance with the following test methods: purity; water; color; inhibitor; and dimer.
SCOPE
1.1 This specification covers glacial acrylic acid2 (99.0 % grade) for use in paint, varnish, lacquer and related products.  
1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 For hazard information and guidance, see the supplier’s Safety Data Sheet.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 6.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D5310-23(Test Method)
Standard Test Method for Tar Acid Composition by Capillary Gas Chromatography

SIGNIFICANCE AND USE
5.1 This test method is suitable for the general quantitative analysis of commercial tar acid mixtures. It may be used as a tool for quality control and specification purposes by producers and users.
SCOPE
1.1 This test method covers the quantitative determination of phenol and certain homologues of phenol in tar acid and cresylic acid mixtures using capillary gas chromatography. It is a normalization test method that determines homolog distribution but is not an absolute assay since it does not account for water or other compounds not detected by a flame ionization detector.  
1.2 In determining the conformance of the test results using this method to applicable specifications, results shall be rounded off in accordance with the rounding-off method of Practice E29.  
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 8.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off