ASTM B829-19
(Specification)Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
ABSTRACT
This general specification contains the mandatory requirements to the ASTM standards listed herein for seamless pipes and tubes made from nickel and nickel alloys. In case of conflict, the requirements listed in the particular product specification takes precedence over those listed here.
SCOPE
1.1 This specification contains various requirements that, with the exception of Sections 5 and 10, are mandatory requirements to the following ASTM nickel and nickel alloy, seamless pipe and tube specifications:
Title of Specification
ASTM
Designation2
Nickel Seamless Pipe and Tube
B161
Seamless Nickel and Nickel Alloy, Condenser and Heat
Exchanger Tubes
B163
Nickel-Copper Alloy (UNS N04400) Seamless Pipe and Tube
B165
Nickel-Chromium-Aluminum Alloys (UNS N06699),
Nickel-Chromium-Iron Alloys (UNS N06600, N06601,
N06603, N06690, N06693, N06025, N06045, and N06696),
Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617),
Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and
Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235) Seamless Pipe and Tube
B167
Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
B407
Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825,
N08221, and N06845) Seamless Pipe and Tube
B423
Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625
and N06852) and Nickel-Chromium-Molybdenum-Silicon
Alloy (UNS N06219) Pipe and Tube
B444
Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and UNS
N08332) Seamless Pipe
B535
Copper-Beryllium Alloy (UNS Nos. C17000 and C17200)
Forgings and Extrusion
B570
Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
B622
UNS N08028 and N08029 Seamless Pipe and Tube
B668
UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe
and Tube
B677
Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08367)
Seamless Pipe and Tube
B690
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon
Alloy (UNS N06333) Seamless Pipe and Tube
B722
Seamless UNS N08020, UNS N08026, and UNS N08024
Nickel-Alloy Pipe and Tube
B729
1.2 One or more of the test requirements of Section 5 apply only if specifically stated in the product specification or in the purchase order.
1.3 In case of conflict between a requirement of the product specification and a requirement of this general specification, only the requirement of the product specification needs to be satisfied.
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.5 The following safety hazards caveat pertains only to the test requirements portion, Section 5, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:B829 −19
Standard Specification for
General Requirements for Nickel and Nickel Alloys
1
Seamless Pipe and Tube
This standard is issued under the fixed designation B829; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope* 1.3 In case of conflict between a requirement of the product
specification and a requirement of this general specification,
1.1 This specification contains various requirements that,
only the requirement of the product specification needs to be
with the exception of Sections 5 and 10, are mandatory
satisfied.
requirements to the following ASTM nickel and nickel alloy,
seamless pipe and tube specifications: 1.4 The values stated in inch-pound units are to be regarded
as standard. The values given in parentheses are mathematical
ASTM
Title of Specification
2
Designation
conversions to SI units that are provided for information only
Nickel Seamless Pipe and Tube B161
and are not considered standard.
Seamless Nickel and Nickel Alloy, Condenser and Heat B163
Exchanger Tubes
1.5 The following safety hazards caveat pertains only to the
Nickel-Copper Alloy (UNS N04400) Seamless Pipe and Tube B165
test requirements portion, Section 5, of this specification: This
Nickel-Chromium-Aluminum Alloys (UNS N06699), B167
standard does not purport to address all of the safety concerns,
Nickel-Chromium-Iron Alloys (UNS N06600, N06601,
N06603, N06690, N06693, N06025, N06045, and N06696),
if any, associated with its use. It is the responsibility of the user
Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617),
of this standard to become familiar with all hazards including
Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and
those identified in the appropriate Safety Data Sheet (SDS) for
Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235)
Seamless Pipe and Tube
this product/material as provided by the manufacturer, to
Nickel-Iron-Chromium Alloy Seamless Pipe and Tube B407
establish appropriate safety, health, and environmental
Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, B423
N08221, and N06845) Seamless Pipe and Tube practices, and determine the applicability of regulatory limi-
Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 B444
tations prior to use.
and N06852) and Nickel-Chromium-Molybdenum-Silicon
1.6 This international standard was developed in accor-
Alloy (UNS N06219) Pipe and Tube
Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and UNS B535 dance with internationally recognized principles on standard-
N08332) Seamless Pipe
ization established in the Decision on Principles for the
Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) B570
Development of International Standards, Guides and Recom-
Forgings and Extrusion
Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube B622 mendations issued by the World Trade Organization Technical
UNS N08028 and N08029 Seamless Pipe and Tube B668
Barriers to Trade (TBT) Committee.
UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe B677
and Tube
Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08367) B690
2. Referenced Documents
Seamless Pipe and Tube
2
2.1 ASTM Standards:
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon B722
Alloy (UNS N06333) Seamless Pipe and Tube
B880 Specification for General Requirements for Chemical
Seamless UNS N08020, UNS N08026, and UNS N08024 B729
Check Analysis Limits for Nickel, Nickel Alloys and
Nickel-Alloy Pipe and Tube
Cobalt Alloys
1.2 One or more of the test requirements of Section 5 apply
E8/E8M Test Methods for Tension Testing of Metallic Ma-
only if specifically stated in the product specification or in the
terials
purchase order.
E18 Test Methods for Rockwell Hardness of Metallic Ma-
terials
1
This specification is under the jurisdiction of ASTM Committee B02 on
E29 Practice for Using Significant Digits in Test Data to
Nonferrous Metals and Alloys and is the direct responsibility of Subcommittee
Determine Conformance with Specifications
B02.07 on Refined Nickel and Cobalt and Their Alloys.
E39 Methods for Chemical Analysis of Nickel (Withdrawn
Current edition approved April 1, 2019. Published April 2019. Originally
3
1995)
approved in 1992. Last previous edition approved in 2018 as B829 – 18. DOI:
10.1520/B0829-19.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
3
Standards volume information, refer to the standard’s Document Summary page on The last approved version of this historical standard is referenced on
the ASTM website. www.astm.org.
*A Summary of Changes section appears at the end of t
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: B829 − 18 B829 − 19
Standard Specification for
General Requirements for Nickel and Nickel Alloys
1
Seamless Pipe and Tube
This standard is issued under the fixed designation B829; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope*
1.1 This specification contains various requirements that, with the exception of Sections 5 and 10, are mandatory requirements
to the following ASTM nickel and nickel alloy, seamless pipe and tube specifications:
ASTM
Title of Specification
2
Designation
Nickel Seamless Pipe and Tube B161
Seamless Nickel and Nickel Alloy, Condenser and Heat Ex- B163
changer Tubes
Seamless Nickel and Nickel Alloy, Condenser and Heat B163
Exchanger Tubes
Nickel-Copper Alloy (UNS N04400) Seamless Pipe and Tube B165
Nickel-Chromium-Iron Alloys (UNS B167
N06600, N06601,
and
N06690)
Seamless Pipe and Tube
Nickel-Chromium-Aluminum Alloys (UNS N06699), B167
Nickel-Chromium-Iron Alloys (UNS N06600, N06601,
N06603, N06690, N06693, N06025, N06045, and N06696),
Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617),
Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and
Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235)
Seamless Pipe and Tube
Nickel-Iron-Chromium Alloy Seamless Pipe and Tube B407
Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 B423
and N08221) Seamless Pipe and Tube
Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, B423
N08221, and N06845) Seamless Pipe and Tube
Nickel-Chromium-Molybdenum-Columbium Alloys (UNS B444
N06625)
Pipe and Tube
Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 B444
and N06852) and Nickel-Chromium-Molybdenum-Silicon
Alloy (UNS N06219) Pipe and Tube
Nickel-Chromium-Iron-Columbium-Molybdenum-Tungsten Alloy B445
(UNS N06102) Seamless Pipe and Tube
Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and UNS B535
N08332) Seamless Pipe
Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) B570
Forgings and Extrusion
Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube B622
UNS N08028 Seamless Tubes B668
UNS N08028 and N08029 Seamless Pipe and Tube B668
UNS N08904, UNS N08925 and UNS N08926 Seamless Pipe B677
and Tube
UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe B677
and Tube
1
This specification is under the jurisdiction of ASTM Committee B02 on Nonferrous Metals and Alloys and is the direct responsibility of Subcommittee B02.07 on Refined
Nickel and Cobalt and Their Alloys.
Current edition approved Nov. 1, 2018April 1, 2019. Published December 2018April 2019. Originally approved in 1992. Last previous edition approved in 20172018 as
B829 – 04a (2017).B829 – 18. DOI: 10.1520/B0829-18.10.1520/B0829-19.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
B829 − 19
Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and B690
UNS N08367) Seamless Pipe and Tube
Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08367) B690
Seamless Pipe and Tube
Ni-Cr-Mo-Co-W-Fe-Si B722
Alloy (UNS N06333) Seamless Pipe and
Tube
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon B722
Alloy (UNS N06333) Seamless Pipe and
Tube
Seamless UNS N08020, UNS N08026, and UNS N08024 B729
Nickel-Alloy Pipe and Tube
1.2 One or more of the test requirements of Section 5 apply only if specifically stated in the product specification or in the
purchase order.
1.3 In case of conflict between a requirement of the product specification and a requirement of this general specification, only
the requirement of the product specification needs to be satisfied.
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical
conversions to SI units that are provided for information only and are not considered standard.
1.5 The following safety hazards caveat pertains only to the test requirements portion, Section 5, of this specification: This
standard does not purport to address all of the safety concerns, if any, associated
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.