iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM E728-91(2009)

(Test Method)

Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides

Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides

SIGNIFICANCE AND USE
This procedure was designed principally with granular clay, corncob, nut shell, or sand carriers and granular pesticide products, but need not be limited to these materials. There may be more appropriate test methods for other types of granular carriers and pesticide products.
SCOPE
1.1 This test method is used to determine the resistance to attrition of granular carriers and granular pesticides.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements see Section 6.

General Information

Status
Historical
Publication Date
30-Sep-2009
ICS
65.100.01 - Pesticides and other agrochemicals in general
Technical Committee
E35 - Pesticides, Antimicrobials, and Alternative Control Agents
Drafting Committee
E35.22 - Pesticide Formulations and Delivery Systems
Current Stage
Ref Project

Relations

Replaces
ASTM E728-91(2004)e1 - Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
Effective Date
01-Oct-2009

Buy Standard

ASTM E728-91(2009) - Standard Test Method for Resistance to Attrition of Granular Carriers and Granular PesticidesASTM E728-91(2009) - Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
PreviousNext
Standard
ASTM E728-91(2009) - Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: E728 − 91(Reapproved 2009)
Standard Test Method for
Resistance to Attrition of Granular Carriers and Granular
Pesticides
This standard is issued under the fixed designation E728; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope products, but need not be limited to these materials. There may
be more appropriate test methods for other types of granular
1.1 This test method is used to determine the resistance to
carriers and pesticide products.
attrition of granular carriers and granular pesticides.
1.2 The values stated in inch-pound units are to be regarded
5. Apparatus
as standard. The values given in parentheses are mathematical
5.1 Brushes, Tyler Model 1778-SB soft brass wire brush, or
conversions to SI units that are provided for information only
equivalent, for 100 mesh and coarser sieves.Tyler nylon bristle
and are not considered standard.
brush, or equivalent, for screens finer than 100 mesh.
1.3 This standard does not purport to address all of the
5.2 MechanicalSieveShaker,aTylerRo-Tapsieveshaker,or
safety concerns, if any, associated with its use. It is the
responsibility of the user of this standard to establish appro- equivalent, or other agreed upon device.
priate safety and health practices and determine the applica-
5.3 Sieves, U.S. standard sieves, or equivalent conforming
bility of regulatory limitations prior to use. For specific hazard
to Specification E11. The sieves shall be 2 in. (51 mm) in
statements see Section 6.
height and 8 in. (203 mm) in diameter.
2. Referenced Documents
5.4 Bottom Receiver Pan and Top Sieve Cover.
2.1 ASTM Standards:
5.5 Steel Balls, ten ⁄8 in. (16 mm) in diameter.
E11 Specification for Woven Wire Test Sieve Cloth and Test
5.6 Interval Timer, adjustable, with an accuracy of 610 s.
Sieves
E725 Test Method for Sampling Granular Carriers and 5.7 Balance, sensitivity of 0.1 g.
Granular Pesticides
5.8 Beaker, glass, metal, or plastic with 250-mL capacity.
3. Summary of Test Method
6. Hazards
3.1 Aknownweightofpre-sizedgranularcarrierorgranular
6.1 Before testing, read the precautionary statements on the
pesticide is combined with steel balls in a sieve-bottom
product label, the material safety data sheet, or both. Take
receiver pan. After a specified period of mechanical agitation,
proper precautions to prevent skin contact and inhalation of the
the steel balls are removed and the weight of the granular
fines and vapors. Take care to prevent contamination of the
material passing through the specified limiting sieve is mea-
surrounding area. Always wear the appropriate safety equip-
sured and the resistance to attrition calculated.
ment and, where indicated, wear respiratory devices passed by
4. Significance and Use NIOSH for the product being tested.
4.1 This procedure was designed principally with granular
7. Procedure
clay, corncob, nut shell, or sand carriers and granular pesticide
7.1 For reproducible results on a comparative basis, it is
necessary to use a narrow mesh fraction or cut for this test.
This test method is under the jurisdiction of ASTM Committee E35 on
Approximately 75 6 5 g of a representative sample as defined
Pesticides, Antimicrobials, and Alternative Control Agentsand is the direct respon-
sibility of Subcommittee E35.22 on Pesticide Formulations and Delivery Systems.
in Test Method E725 is required for each test and duplication
Current edition approved Oct. 1, 2009. Published November 2009. Originally
is recommended.
ϵ1
approved in 1980. Last previous edition approved in 2004 as E728 – 91(2004) .
DOI: 10.1520/E0728-91R09.
7.2 Select
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM E609-23(Terminology)
Standard Terminology Relating to Pesticides
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM E1102-91(2022)(Terminology)
Standard Terminology Relating to Agricultural Chemical Application

SCOPE
1.1 The purpose of this terminology standard is to establish uniformity in terms used in the field of agricultural chemical application. Terms are adopted from related fields and where applicable from Terminology E609.  
1.2 The terms are appropriate to any agricultural chemical application. Units in parenthesis following a definition are meant as typical and are not exhaustive of all units available for the term.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM E1673-21(Test Method)
Standard Test Method for Percent Suspensibility

SIGNIFICANCE AND USE
4.1 This test method is designed specifically for dry formulations, but need not be restricted to these materials.  
4.2 Either option of this test method (see Section 8) may be used to determine the percent suspensibility.  
4.3 This test method may not be applicable to all dry formulations such as those containing liquid or soluble technical/pesticides or ingredients that rise to the top upon separation.  
4.4 This test method may not be applicable to formulations containing ingredients that decompose under the test conditions.  
4.5 This test method may not give reproducible results if flocculation occurs.  
4.6 This test method should be run in duplicate.  
4.7 Products containing water soluble or volatile components may result in errors.
SCOPE
1.1 This test method is used to determine the percent suspensibility of dry pesticide formulations.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements see Section 7.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM E725-96(2021)(Test Method)
Standard Test Method for Sampling Granular Carriers and Granular Pesticides

SIGNIFICANCE AND USE
3.1 This procedure was designed principally for clay, corncob, nut shell, or sand granular carriers and granular pesticide products but need not be limited to these materials. There may be more appropriate sampling methods for other types of granular carriers and products.
SCOPE
1.1 This test method presents general procedures for sampling and sampling practice for granular carriers and granular pesticides.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements see Section 5.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM E727/E727M-08(2020)(Test Method)
Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides

SIGNIFICANCE AND USE
3.1 These test methods were designed principally for clay, corncob, nut shell, paper-based or sand granular carriers, and granular pesticide products, but need not be limited to these materials. There may be more appropriate test methods for other types of granular carriers or pesticide products. The differences in the following test methods are slight, but they offer a choice of a recognized test procedure.
SCOPE
1.1 These test methods are used to determine bulk density of granular carriers and granular pesticides by measuring either free-fall bulk density (Test Method A) or loose-fill bulk density (Test Method B).  
1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements see Section 4.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM E728-91(2020)(Test Method)
Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides

SIGNIFICANCE AND USE
4.1 This procedure was designed principally with granular clay, corncob, nut shell, or sand carriers and granular pesticide products, but need not be limited to these materials. There may be more appropriate test methods for other types of granular carriers and pesticide products.
SCOPE
1.1 This test method is used to determine the resistance to attrition of granular carriers and granular pesticides.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements see Section 6.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM E1053-20(Practice)
Standard Practice to Assess Virucidal Activity of Chemicals Intended for Disinfection of Inanimate, Nonporous Environmental Surfaces

SIGNIFICANCE AND USE
5.1 This practice may be used to determine the effectiveness of liquid, aerosols/foams, and trigger-spray products against designated prototype viruses.  
5.2 The number of lots of the test substance and the number of replicates in each test will depend on the requirements of the target regulatory agency.  
5.3 Certain regulatory agencies may require additional testing using other carrier tests for product registration purposes.
SCOPE
1.1 This practice is used to evaluate the virucidal efficacy of liquid, aerosol, or trigger-spray microbicides intended for use on inanimate, nonporous environmental surfaces. This practice may be employed with most viruses, which can be grown in cultured cells.2 However, other host systems (for example, embryonic eggs) may be used with proper justification and documentation.  
1.2 This practice should be performed only by those trained in microbiological and virological techniques in facilities designed and equipped for work with infectious agents at the appropriate biosafety level.  
1.3 It is the responsibility of the investigator to determine whether Good Laboratory Practice regulations (GLPs) are required and to follow them where appropriate (40 CFR, Part 160 for EPA submissions and 21 CFR, Part 58 for FDA submissions). Refer to the appropriate regulatory agency for performance standards of virucidal efficacy.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. The user should consult a reference for laboratory safety recommendations.2  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
ASTM
ASTM E1052-20(Practice)
Standard Practice to Assess the Activity of Microbicides against Viruses in Suspension

SIGNIFICANCE AND USE
5.1 This practice is to determine if a test substance can inactivate viruses in suspension.  
5.2 Regulatory agencies may require additional testing using in vitro (Practice E1053, Test Method E2197) or in vivo (Test Method E1838) carrier tests for product registration purposes.
SCOPE
1.1 This practice is intended to demonstrate the virucidal activity of test substances with viruses in suspension.  
1.2 It is the responsibility of the investigator to determine whether Good Laboratory Practice regulations (GLPs) are required and to follow them where appropriate (40 CFR, Part 160 for EPA submissions and 21 CFR, Part 58 for FDA submissions).  
1.3 Refer to the appropriate regulatory agency for performance standards of virucidal efficacy.  
1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. The user should consult a reference for the laboratory safety recommendations.2  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM E2316-14(2019)e1(Test Method)
Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides

SIGNIFICANCE AND USE
5.1 This test method is designed specifically for granular pesticide formulations.  
5.2 This test method helps provide information on health hazards likely to arise from exposures by the inhalation route. It can be of use in selecting dose levels for chronic studies and for establishing safety criteria for human exposure.  
5.3 The amount of fines determined by this method is a measure of potential inhalation and respiration toxicity because the hazards of inhaled solid substances are influenced by physical factors such as particle size.
SCOPE
1.1 This test method is used to determine the amount and particle size distribution curve of particles with diameter 106 micrometers or smaller resulting from the attrition of granular pesticides.  
1.2 The values stated in SI units are to be regarded as standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statement, see Section 8.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM E1518-05(2019)(Practice)
Standard Practice for Evaluation of Physical Compatibility of Pesticides in Aqueous Tank Mixtures by the Dynamic Shaker Method

SIGNIFICANCE AND USE
4.1 This practice is designed for researchers, applicators, and end users of pesticides where one or more ingredients are being mixed into an aqueous spray system. The practice is useful in determining physical compatibility of aqueous spray mixtures of pesticides and/or fertilizers.  
4.2 The practice is not designed to determine physical compatibility of non-aqueous based spray mixtures.  
4.3 The results or the testing should be used to determine the compatibility of the mixture ingredients in dynamic applications. Interpolation of static results to the expectations of the results of this test is not encouraged.
SCOPE
1.1 This practice describes the method for the evaluation of the physical compatibility and stability of pesticide tank mixtures diluted for aqueous application. This practice may also be adapted to use with liquid fertilizers in replacement of the water diluent.  
1.2 Tank mix compatibility can be affected by many variables. Care should be taken to duplicate test conditions. This practice addresses the standard variables such as time, temperature, water hardness, method of agitation, and degree of agitation.  
1.3 Compatibility is complex and can be affected by other variables such as order of addition, pH of the dilution water, pumping shear, etc. Under the parameters of this practice, the results will define whether the pesticide mixture is or is not compatible in the laboratory. Compatibility or incompatibility should be confirmed under field spray conditions.  
1.4 Proper safety and hygiene precautions must be taken when working with pesticide formulations to prevent skin or eye contact, vapor inhalation, and environmental contamination.  
1.5 Read and follow all handling instructions for the specific formulation and conduct the test in accordance with good laboratory practice.  
1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off