ASTM F3287-17e1
(Test Method)Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method
Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method
SIGNIFICANCE AND USE
5.1 Leaks in medical, pharmaceutical, or food product packages can affect product quality and consumer safety. Such leaks can arise from imperfections in package material or between mated components designed to seal the package. Defects can allow unwanted gas (e.g. oxygen or water vapor), particulates, liquids, or microbiological contaminants into or out of the package. Package defect detection can be a critical part of ensuring product quality and consumer safety. Use of a physical CCI test method for sterile products can be used to assure the stability of the package sterility property during transportation and product shelf life.
5.2 Mass extraction is a useful non-destructive test method for testing a wide variety of packages. Package shape and dimensions that can be tested using mass extraction are essentially unlimited, as long as a vacuum test chamber can be designed and manufactured to accommodate the package.
5.3 This method produces quantitative flow measurement results that are useful in comparing package sealing properties, different batches of product, material properties, and combinations of process parameters.
5.4 Applications for mass extraction range from manually loaded and operated machines to automatic unattended work cells. This method can be applied for audit testing or 100% in-line testing.
Note 2: Leak test methods that rely on gas or vapor transport, such as mass extraction, are not able to detect defects if they become plugged by solid or nonvolatile matter. Plugging is possible by exposure to environmental contaminants. In some cases, the packaged product itself can clog defects. For example, leak paths may become blocked by suspended solids, gelatinous matter or dried-out solutions. Product clogging propensity is a function of the product formulation, defect size and geometry, and may be linked to product storage and handling conditions as well as the time allotted to defect exposure. An investigation into the impact of repeate...
SCOPE
1.1 This method provides a nondestructive means to detect holes (leaks) in a variety of non-porous rigid and semi-rigid packages.
1.2 This test method detects package leaks by measuring the mass flow extracted from a package while the package is enclosed inside an evacuated test chamber. The test system is a closed system during the leakage measurement portion of the test cycle. The closed system includes a vacuum reservoir, Intelligent Molecular Flow Sensor (IMFS), and vacuum test chamber. Mass extracted from the test package into the vacuum test chamber flows to the vacuum reservoir through the IMFS to equalize the system. Mass flow rate from the vacuum chamber to the vacuum reservoir is measured by the IMFS. Based on the conservation of mass law, mass flow into the closed system is equal to the mass loss from the test package. The test system is capable of producing quantitative (variable data) or qualitative (pass/fail) results depending on the requirements.
1.2.1 Headspace gas leakage defects equivalent to a 1µm diameter glass micropipette (sharp edge defect) can be detected at a 95% confidence level.
1.2.2 Liquid leakage defects equivalent to a 1µm diameter glass micropipette can be detected at a 95% confidence level for glass vials and LDPE bottles. Liquid leakage defects equivalent to a 2 µm diameter glass micropipette can be detected for glass syringes.
1.3 Units—The values stated in SI units are to be regarded as standard. Pressure units are expressed as Pa, mbar, or Torr.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization esta...
General Information
Relations
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
´1
Designation: F3287 − 17
Standard Test Method for
Nondestructive Detection of Leaks in Packages by Mass
1,2
Extraction Method
This standard is issued under the fixed designation F3287; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1
ε NOTE—Editorial corrections were made in May 2018.
1. Scope 1.4 This standard does not purport to address all of the
safety concerns, if any, associated with its use. It is the
1.1 This method provides a nondestructive means to detect
responsibility of the user of this standard to establish appro-
holes (leaks) in a variety of non-porous rigid and semi-rigid
priate safety, health, and environmental practices and deter-
packages.
mine the applicability of regulatory limitations prior to use.
1.2 Thistestmethoddetectspackageleaksbymeasuringthe 1.5 This international standard was developed in accor-
mass flow extracted from a package while the package is dance with internationally recognized principles on standard-
enclosed inside an evacuated test chamber. The test system is ization established in the Decision on Principles for the
aclosedsystemduringtheleakagemeasurementportionofthe
Development of International Standards, Guides and Recom-
test cycle. The closed system includes a vacuum reservoir, mendations issued by the World Trade Organization Technical
Intelligent Molecular Flow Sensor (IMFS), and vacuum test
Barriers to Trade (TBT) Committee.
chamber.Massextractedfromthetestpackageintothevacuum
2. Referenced Documents
test chamber flows to the vacuum reservoir through the IMFS
3
to equalize the system. Mass flow rate from the vacuum
2.1 ASTM Standards:
chamber to the vacuum reservoir is measured by the IMFS.
E177Practice for Use of the Terms Precision and Bias in
Based on the conservation of mass law, mass flow into the
ASTM Test Methods
closed system is equal to the mass loss from the test package.
E691Practice for Conducting an Interlaboratory Study to
The test system is capable of producing quantitative (variable
Determine the Precision of a Test Method
data)orqualitative(pass/fail)resultsdependingontherequire-
F17Terminology Relating to Primary Barrier Packaging
4
ments.
2.2 ISO Standard:
1.2.1 Headspace gas leakage defects equivalent to a 1µm ISO/IEC 17025General requirements for the competence of
diameterglassmicropipette(sharpedgedefect)canbedetected testing and calibration laboratories
at a 95% confidence level.
3. Terminology
1.2.2 Liquid leakage defects equivalent to a 1µm diameter
glass micropipette can be detected at a 95% confidence level 3.1 For terminology related to primary barrier packaging,
see Terminology F17.
for glass vials and LDPE bottles. Liquid leakage defects
equivalent toa2µm diameter glass micropipette can be
3.2 Definitions of Terms Specific to This Standard:
detected for glass syringes.
3.2.1 baseline flow measurement, n—measuredflowratefor
a negative control test package. Measured flow is largely
1.3 Units—The values stated in SI units are to be regarded
attributed to characteristics of the package (material type,
as standard. Pressure units are expressed as Pa, mbar, or Torr.
labels, etc.).
3.2.2 blank master part, n—a piece of metal tooling with
similar volume and shape as the actual test package. This is
1
ThistestmethodisunderthejurisdictionofASTMCommitteeF02onPrimary
used to represent a leak free package.
Barrier Packaging and is the direct responsibility of Subcommittee F02.40 on
Package Integrity.
Current edition approved Nov. 1, 2017. Published November 2017. DOI:
3
10.1520/F3287-17. For referenced ASTM standards, visit the ASTM website, www.astm.org, or
2
Mass Extraction is covered by patents (1, 2). If you are aware of an contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
alternative(s) to the patented item, please attach to your ballot return a description Standards volume information, refer to the standard’s Document Summary page on
of the alternatives. All suggestions will be considered by the committee. If the ASTM website.
4
alternatives are identified, the committee shall reconsider whether the patented item Available fromAmerican National Standards Institute (ANSI), 25 W. 43rd St.,
is necessary. The committee, in making its decision, shall follow Regulation 15. 4th Floor, New York, NY 10036, http://www.ansi.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
--------------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.