ASTM E1669-95a(2018)
(Classification)Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding
Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding<rangeref></rangeref >
SIGNIFICANCE AND USE
4.1 Each Facility Rating Scale (see Figs. 1-6) in this classification provides a means to estimate the level of serviceability of a building or facility for one topic of serviceability and to compare that level against the level of any other building or facility.
4.2 This classification can be used for comparing how well different buildings or facilities meet a particular requirement for serviceability. It is applicable despite differences such as location, structure, mechanical systems, age, and building shape.
4.3 This classification can be used to estimate the amount of variance of serviceability from target or from requirement, for a single office facility, or within a group of office facilities.
4.4 This classification can be used to estimate the following:
4.4.1 Serviceability of an existing facility for uses other than its present use.
4.4.2 Serviceability (potential) of a facility that has been planned but not yet built.
4.4.3 Serviceability (potential) of a facility for which remodeling has been planned.
4.5 Use of this classification does not result in building evaluation or diagnosis. Building evaluation or diagnosis generally requires a special expertise in building engineering or technology and the use of instruments, tools, or measurements.
4.6 This classification applies only to facilities that are building constructions, or parts thereof. (While this classification may be useful in rating the serviceability of facilities that are not building constructions, such facilities are outside the scope of this classification.)
4.7 This classification is not intended for, and is not suitable for, use for regulatory purposes, nor for fire hazard assessment nor for fire risk assessment.
SCOPE
1.1 This classification contains pairs of scales for classifying an aspect of the serviceability of an office facility, that is, the capability of an office facility to meet certain possible requirements for locating the building and finding the way inside the building.
1.2 Within that aspect of serviceability, each pair of scales, shown in Figs. 1-6, are for classifying one topic of serviceability. Each paragraph in an Occupant Requirement Scale (see Figs. 1-6) summarizes one level of serviceability on that topic, which occupants might require. The matching entry in the Facility Rating Scale (see Figs. 1-6) is a translation of the requirement into a description of certain features of a facility which, taken in combination, indicate that the facility is likely to meet that level of required serviceability.
FIG. 1 Scale A.14.1 for Public Transportation (Urban Sites)
FIG. 2 Scale A.14.2 for Staff Visits to Other Offices
FIG. 3 Scale A.14.3 for Vehicular Entry and Parking
FIG. 3 Scale A.14.3 for Vehicular Entry and Parking (continued)
FIG. 4 Scale A.14.4 for Wayfinding to Building and Lobby
FIG. 4 Scale A.14.4 for Wayfinding to Building and Lobby (continued)
FIG. 5 Scale A.14.5 for Capacity of Internal Movement Systems
FIG. 5 Scale A.14.5 for Capacity of Internal Movement Systems (continued)
FIG. 6 Scale A.14.6 for Public Circulation and Wayfinding in Building
FIG. 6 Scale A.14.6 for Public Circulation and Wayfinding in Building (continued)
1.3 The entries in the Facility Rating Scale (see Figs. 1-6) are indicative and not comprehensive. They are for quick scanning to estimate approximately, quickly, and economically, how well an office facility is likely to meet the needs of one or another type of occupant group over time. The entries are not for measuring, knowing, or evaluating how an office facility is performing.
1.4 This classification can be used to estimate the level of serviceability of an existing facility. It can also be used to estimate the serviceability of a facility that has been planned but not yet built, such as one for which single-line drawings and outline specifications have been prepared.
1.5 This classificatio...
General Information
Relations
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation:E1669 −95a (Reapproved 2018)
Standard Classification for
Serviceability of an Office Facility for Location, Access and
1,2
Wayfinding
This standard is issued under the fixed designation E1669; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope E2334. The scales in this classification are complimentary to
and compatible with Practice E2334. Each requires the other.
1.1 This classification contains pairs of scales for classify-
ing an aspect of the serviceability of an office facility, that is, 1.6 The values stated in SI units are to be regarded as
the capability of an office facility to meet certain possible standard. No other units of measurement are included in this
requirements for locating the building and finding the way standard.
inside the building.
1.7 This international standard was developed in accor-
dance with internationally recognized principles on standard-
1.2 Within that aspect of serviceability, each pair of scales,
ization established in the Decision on Principles for the
shown in Figs. 1-6, are for classifying one topic of serviceabil-
Development of International Standards, Guides and Recom-
ity. Each paragraph in an Occupant Requirement Scale (see
mendations issued by the World Trade Organization Technical
Figs. 1-6) summarizes one level of serviceability on that topic,
Barriers to Trade (TBT) Committee.
which occupants might require. The matching entry in the
Facility Rating Scale (see Figs. 1-6) is a translation of the
2. Referenced Documents
requirement into a description of certain features of a facility
which, taken in combination, indicate that the facility is likely
2.1 ASTM Standards:
to meet that level of required serviceability.
E631 Terminology of Building Constructions
E2334 Practice for Setting an Upper Confidence Bound for a
1.3 The entries in the Facility Rating Scale (see Figs. 1-6)
Fraction or Number of Non-Conforming items, or a Rate
are indicative and not comprehensive. They are for quick
of Occurrence for Non-Conformities, Using Attribute
scanningtoestimateapproximately,quickly,andeconomically,
Data, When There is a Zero Response in the Sample
how well an office facility is likely to meet the needs of one or
E1679 Practice for Setting the Requirements for the Service-
another type of occupant group over time. The entries are not
for measuring, knowing, or evaluating how an office facility is ability of a Building or Building-Related Facility, and for
Determining What Serviceability is Provided or Proposed
performing.
2.2 ISO Document:
1.4 This classification can be used to estimate the level of
ISO 6240 International Standard, Performance Standards in
serviceability of an existing facility. It can also be used to
Building—Contents and Presentation
estimate the serviceability of a facility that has been planned
but not yet built, such as one for which single-line drawings
and outline specifications have been prepared. 3. Terminology
3.1 Definitions:
1.5 This classification indicates what would cause a facility
to be rated at a certain level of serviceability but does not state 3.1.1 facility—a physical setting used to serve a specific
purpose. E631
how to conduct a serviceability rating nor how to assign a
serviceability score. That information is found in Practice 3.1.1.1 Discussion—A facility may be within a building, a
whole building, or a building with its site and surrounding
environment; or it may be a construction that is not a building.
1 The term encompasses both the physical object and its use.
This classification is under the jurisdiction of ASTM Committee E06 on
Performance of Buildings and is the direct responsibility of Subcommittee E06.25
on Whole Buildings and Facilities.
Current edition approved March 1, 2018. Published March 2018. Originally
approved in 1995. Last previous edition approved in 2012 as E1669 – 95a (2012). For referenced ASTM standards, visit the ASTM website, www.astm.org, or
DOI: 10.1520/E1669-95AR18. contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Portions of this document are based on material originally prepared by the Standards volume information, refer to the standard’s Document Summary page on
International Centre for Facilities (ICF) and © 1993 by ICF and Minister of Public the ASTM website.
Works and Government Services Canada. Their cooperation in the development of Available from American National Standards Institute (ANSI), 25 W. 43rd St.,
this standard is acknowledged. 4th Floor, New York, NY 10036, http://www.ansi.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
E1669−95a (2018)
FIG. 1Scale A.14.1 for Public Transportation (Urban Sites)
E1669−95a (2018)
FIG. 2Scale A.14.2 for Staff Visits to Other Offices
E1669−95a (2018)
FIG. 3Scale A.14.3 for Vehicular Entry and Parking
E1669−95a (2018)
FIG. 3Scale A.14.3 for Vehicular Entry and Park
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.