ASTM D319-04

Standard Specification for Amyl Alcohol (Synthetic) (Withdrawn 2010)

ABSTRACT
This specification covers synthetic amyl alcohol. The properties of amyl alcohol shall be determined in accordance with the following test methods: apparent specific gravity; color; distillation range; water; and acidity.
SCOPE
1.1 This specification covers synthetic amyl alcohol.
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off "to the nearest unit" in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E 29.
1.4 For hazard information and guidance, see the supplier's Material Safety Data Sheet.
WITHDRAWN RATIONALE
This specification covers synthetic amyl alcohol.
Formerly under the jurisdiction of Committee D01 on Paint and Related Coatings, Materials, and Applications this specification was withdrawn in June 2010. This standard is being withdrawn without replacement due to its limited use by industry.

General Information

• Status: Withdrawn
• Publication Date: 31-Oct-2004
• Withdrawal Date: 31-May-2010
• ICS: 71.080.60 - Alcohols. Ethers
• Technical Committee: D01 - Paint and Related Coatings, Materials, and Applications
• Drafting Committee: D01.35 - Solvents, Plasticizers, and Chemical Intermediates

Relations

• Replaces: ASTM D319-95(1999) - Standard Specification for Amyl Alcohol (Synthetic)
• Effective Date: 01-Nov-2004

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information.
Designation: D319 – 04
Standard Specification for
,
1 2
Amyl Alcohol (Synthetic)
This standard is issued under the fixed designation D319; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope* Gravity of Liquids by Digital Density Meter
E1 Specification for ASTM Liquid-in-Glass Thermometers
1.1 This specification covers synthetic amyl alcohol.
E29 Practice for Using Significant Digits in Test Data to
1.2 The values stated in SI units are to be regarded as the
Determine Conformance with Specifications
standard. The values given in parentheses are for information
E300 Practice for Sampling Industrial Chemicals
only.
2.2 U.S. Federal Specification:
1.3 The following applies to all specified limits in this
PPP-C-2020 Chemicals, Liquid, Dry, and Paste: Packaging
standard; for purposes of determining conformance with this
4
of
standard, an observed value or a calculated value shall be
rounded off “to the nearest unit” in the last right-hand digit
3. Properties
used in expressing the specification limit, in accordance with
3.1 Amyl alcohol (synthetic) shall conform to the following
the rounding-off method of Practice E29.
requirements:
1.4 For hazard information and guidance, see the supplier’s
Apparent specific gravity
Material Safety Data Sheet.
20/20°C 0.812–0.820
or
2. Referenced Documents
25/25°C 0.809–0.817
3
Color, Pt-Co scale, max 15
2.1 ASTM Standards:
Distillation range, 760 mmHg, °C as:
D268 Guide for Sampling andTestingVolatile Solvents and
Initial boiling point, min 127.5
Chemical Intermediates for Use in Paint and Related Dry point, max 139.0
A
Water, max, weight % 0.3
Coatings and Material
B
Acidity, as acetic acid, max, weight % 0.01
D891 Test Methods for Specific Gravity, Apparent, of
______________
Liquid Industrial Chemicals
A
D1078 Test Method for Distillation Range of Volatile Or- This quantitative water limit ensures that the material is miscible without
turbidity with 19 volumes of 99 % heptane at 20°C.
ganic Liquids
B
Equivalent to 0.093 mg of KOH per gram of sample.
D1209 Test Method for Color of Clear Liquids (Platinum-
Cobalt Scale)
4. Sampling
D1364 Test Method for Water in Volatile Solvents (Karl
4.1 The material shall be sampled in accordance with
Fischer Reagent Titration Method)
Practice E300.
D1476 Test Method for Heptane Miscibility of Lacquer
Solvents
5. Test Methods
D1613 Test Method for Acidity in Volatile Solvents and
5.1 The properties enumerated in this specification shall be
Chemical Intermediates Used in Paint, Varnish, Lacquer,
determined in accordance with the following ASTM methods:
and Related Products
5.1.1 Apparent Specific Gravity—Determine the apparent
D4052 Test Method for Density, Relative Density, and API
specific gravity at 20 or 25°C by a convenient method that is
accurate to the third decimal place. See Guide D268 or Test
Methods D891 or D4052.
1
This specification is under the jurisdiction of ASTM Committee D01 on Paint
5.1.2 Color—Test Method D1209.
and Related Coatings, Materials, andApplication
...