iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM E890-94(2004)

(Specification)

Standard Specification for Disposable Glass Culture Tubes

Standard Specification for Disposable Glass Culture Tubes

ABSTRACT
This specification covers the requirements for disposable glass culture tubes for use in culturing applications. Disposable glass culture tubes shall be made of type I (borosilicate) or type II (soda-lime) glass. Tube design shall be of one-piece construction. Other requirements shall include top or open end finish requirement, bottom or closed end requirement, residual thermal stress requirement, workmanship, and tube dimensions.
SCOPE
1.1 This specification covers the requirements for disposable glass tubes suitable for general testing and culturing applications in blood banks, hematology, bacteriology, virology, and tissue culture laboratories.
1.2 For practical purposes, the word "disposable" according to this specification and expected product performance expressed in this specification describes those disposable glass culture tubes that are to be used one time only. Any institution or individual who reuses a disposable glass culture tube must bear full responsibility for its safety and effectiveness.
1.3 For packaging standards, choose among the following: Specifications E 920 or E 921 or Practice E 1133.

General Information

Status
Historical
Publication Date
30-Apr-2004
ICS
11.100 - Laboratory medicine
Technical Committee
E41 - Laboratory Apparatus
Drafting Committee
E41.01 - Laboratory Ware and Supplies
Current Stage
Ref Project

Relations

Replaces
ASTM E890-94(1998) - Standard Specification for Disposable Glass Culture Tubes
Effective Date
01-May-2004
Replaced By
ASTM E890-94(2009) - Standard Specification for Disposable Glass Culture Tubes
Effective Date
01-Nov-2009

Buy Standard

ASTM E890-94(2004) - Standard Specification for Disposable Glass Culture TubesASTM E890-94(2004) - Standard Specification for Disposable Glass Culture Tubes
PreviousNext
Technical specification
ASTM E890-94(2004) - Standard Specification for Disposable Glass Culture Tubes
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information.
Designation: E 890 – 94 (Reapproved 2004)
Standard Specification for
Disposable Glass Culture Tubes
This standard is issued under the fixed designation E 890; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope E1133 Practice for Performance Testing of Packaged Labo-
ratory Apparatus for United States Government Procure-
1.1 This specification covers the requirements for dispos-
ments
able glass tubes suitable for general testing and culturing
applications in blood banks, hematology, bacteriology, virol-
3. Materials
ogy, and tissue culture laboratories.
3.1 Thedisposableglassculturetubesshallbemadeofglass
1.2 For practical purposes, the word “disposable” according
in accordance with the requirements of Type I, Class A or B
to this specification and expected product performance ex-
(borosilicate glass) or Type II (soda-lime glass) of Specifica-
pressed in this specification describes those disposable glass
tion E438.
culture tubes that are to be used one time only. Any institution
or individual who reuses a disposable glass culture tube must
4. Design
bear full responsibility for its safety and effectiveness.
4.1 The tubes shall be of one-piece construction in accor-
1.3 For packaging standards, choose among the following:
dance with Fig. 1 for shape, and any cross section of the tube,
Specifications E920 or E921 or Practice E1133.
taken in a plane perpendicular to the longitudinal axis, shall
2. Referenced Documents preferably be circular.
2 4.2 The top or open end of the tube shall be smoothly
2.1 ASTM Standards:
fire-polished at right angles to the horizontal axis of the tube.
C148 Test Methods for Polariscopic Examination of Glass
4.3 Thebottomorclosedendofthetubeshallbecompletely
Containers
closed and shall have a spherical radius inside and outside in
E438 Specification for Glasses in Laboratory Apparatus
accordance with Fig. 1. The wall thickness in the bottom shall
E671 Specification for Maximum Permissible Thermal Re-
be at least 66 ⁄3 % of the side wall thickness, but not more than
sidual Stress in Annealed Glass Laboratory Apparatus
210 % of the side wall thickness.
E920 Specification for Commercially Packaged Laboratory
4.4 Residual thermal stress shall not exceed 750 psi when
Apparatus
determined in accordance with Specification E671.
E921 Specification for Export Packaged Laboratory Appa-
4.5 Workmanship—The glass tube shall be free of defects
ratus
that impair serviceability. The glass tube shall be transparent,
clean, dry, and reasonably free of foreign material, loose or
This specification is under the jurisdiction of ASTM Committee
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM E732-80(2024)(Specification)
Standard Specification for Disposable Pasteur-Type Pipet

ABSTRACT
This specification covers the design and dimensional requirements for four types (Types I, II, III, and IV) of disposable bacteriological (Pasteur-type) nonvolumetric glass pipets suitable for replicate dispensing of drops of solutions and suspensions for laboratory purposes. The pipets shall be made of good quality, clear glass of either Type I, Class A or B (borosilicate), or Type II (soda lime). They shall be of a one-piece glass construction and each type shall correspondingly meet the requirements for overall length, body length, body outside diameter, body wall thickness, top-to-constriction distance, and tip inside diameter.
SCOPE
1.1 This specification covers requirements for four types of glass disposable bacteriological (Pasteur type) nonvolumetric pipets suitable for replicate dispensing of drops of solutions and suspensions for laboratory purposes.  
FIG. 1 General Form of Glass Disposable Pasteur Pipets  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM E787-81(2024)(Specification)
Standard Specification for Disposable Glass Micro Blood Collection Pipets

ABSTRACT
This specification covers two dimensionally different (short and long) disposable glass micropipets used primarily to collect whole human blood specimens for clinical analysis and testing. Short and long pipets are available as coated with heparin (Type I) or uncoated (Type II).The pipets shall be fabricated from borosilicate glass, Type I, Class B, or soda lime glass, Type II. Heparin shall be the ammonium salt isolated from the lungs or intestinal mucosa of beef or pork origin and shall meet the specified heparin potency. The physical requirements including design, dimensions, workmanship, color coding, capillarity, fluidity, lot or control number, resistance to centrifugal force, and heparin coating are specified. The following tests shall be performed: capillarity test, fluidity test, sheep plasma test, human whole blood test, resistance to centrifugal force test, and heparin content test. The physical requirements for short Caraway pipet and long Natelson pipet are illustrated as well.
SCOPE
1.1 This specification covers two dimensionally different disposable glass micropipets used primarily to collect whole human blood specimens for clinical analysis and testing. They are available as coated with heparin or uncoated.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off
ASTM
ASTM E1044-96(2024)(Specification)
Standard Specification for Glass Serological Pipets (General Purpose and Kahn)

ABSTRACT
This specification covers reusable glass serological pipets used for measuring volumes of liquid. The pipets may be classified into three styles according to operational set-up and should be made with approved glass materials. Each pipet should be straight, of one-piece construction, and properly calibrated. All products should conform to the required dimension of delivery tips, zero gradation line position, dimensions and outflow times, graduation markings, color coding, identification markings, and workmanship.
SCOPE
1.1 This specification covers glass serological pipets, used in measuring volumes of liquids.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off
ASTM
ASTM E714-94(2021)(Specification)
Standard Specification for Disposable Glass Serological Pipets

ABSTRACT
This specification covers disposable glass serological pipets, calibrated "to deliver," used in measuring volumes of liquids. Pipets shall be straight and have one-piece construction, fabricated from borosilicate glass, Type I, Class A or B; or soda-lime glass, Type II. Any cross section of a pipet taken in a plane perpendicular to the longitudinal axis shall be circular. The accuracy and coefficient of variation of the pipets shall be tested gravimetrically.
SCOPE
1.1 This specification covers disposable glass serological pipets, calibrated “to deliver,” used in measuring volumes of liquids.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM E890-94(2021)(Specification)
Standard Specification for Disposable Glass Culture Tubes

ABSTRACT
This specification covers the requirements for disposable glass culture tubes for use in culturing applications. Disposable glass culture tubes shall be made of type I (borosilicate) or type II (soda-lime) glass. Tube design shall be of one-piece construction. Other requirements shall include top or open end finish requirement, bottom or closed end requirement, residual thermal stress requirement, workmanship, and tube dimensions.
SCOPE
1.1 This specification covers the requirements for disposable glass tubes suitable for general testing and culturing applications in blood banks, hematology, bacteriology, virology, and tissue culture laboratories.  
1.2 For practical purposes, the word “disposable” according to this specification and expected product performance expressed in this specification describes those disposable glass culture tubes that are to be used one time only. Any institution or individual who reuses a disposable glass culture tube must bear full responsibility for its safety and effectiveness.  
1.3 For packaging standards, choose among the following: Specifications E920 or E921 or Practice E1133.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM E934-94(2021)(Specification)
Standard Specification for Serological Pipet, Disposable Plastic

ABSTRACT
This specification covers disposable plastic serological pipets, calibrated to deliver when measuring volumes of liquids. The pipets shall be fabricated from crystal-grade, uncolored polystyrene, or its regrind. They shall adhere to the property requirements discussed herein for design (shape, delivery tips, top end, dimensions, and outflow times), graduation and identification markings, capacity, and accuracy and coefficient of variation.
SCOPE
1.1 This specification covers disposable plastic serological pipets, calibrated “to deliver” when measuring volumes of liquids.  
1.1.1 Any institution or individual who reuses a disposable pipet must bear full responsibility for its safety and effectiveness.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off
ASTM
ASTM E788-97(2019)(Specification)
Standard Specification for Pipet, Blood Diluting

ABSTRACT
This specification covers the requirements for glass reusable blood diluting pipets that are used for performing red and white cell corpuscle determinations. The pipets shall be made of common spirit bore white back tubing or clear glass with a white stripe applied to the outer surface of the tubing. The beads shall be made of glass or ceramic composition and shall be of red, clear, or white coloring. Materials shall be tested and the individual types shall conform to specified values of design, capacity, capacity markings, graduation lines, accuracy, workmanship, identification, and pigmentation.
SCOPE
1.1 This specification covers requirements for glass reusable blood diluting pipets that are used for performing red and white cell corpuscle determinations.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    4 pages
    English language
    sale 15% off
ASTM
ASTM E923-97(2019)(Specification)
Standard Specification for Glass Westergren Tube, Reusable

ABSTRACT
This specification covers the design and dimensional requirements for reusable glass Westergren tubes that measure the erythrocyte sedimentation rate (ESR), which is the suspension stability, or amount of settling after a specified time, of red blood cells in diluted, anti-coagulated human blood. The tubes shall be fabricated from Type I, Class B borosilicate glass, or Type II soda lime glass. Tubes shall comply with requirements for graduation line length and numbering, marking permanency, grinding bevel, and workmanship. The tubes should also pass a pigmentation and amber stain test.
SCOPE
1.1 This specification describes requirements for a tube that measures the erythrocyte sedimentation rate (ESR). ESR is the suspension stability of red cells in diluted, anti-coagulated human blood.  
1.1.1 The use of the term “rate” is, strictly speaking, not correct. The test measures the amount of settling of red cells after a specified time.  
1.2 The tubes are used together with a special rack to ensure they remain in a vertical position during the test.  
1.3 This specification includes many dimensional requirements that are, for the most part, in agreement with the British Standards Institution, German Standards Institute, International Committee for Standardization in Haematology, and the National Committee for Clinical Laboratory Standards publications on Westergren tubes. The clinical procedure using the tube described in this specification is known as the “Westergren Method.”  
1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off
ASTM
ASTM E1044-96(2024)(Specification)
Standard Specification for Glass Serological Pipets (General Purpose and Kahn)

ABSTRACT
This specification covers reusable glass serological pipets used for measuring volumes of liquid. The pipets may be classified into three styles according to operational set-up and should be made with approved glass materials. Each pipet should be straight, of one-piece construction, and properly calibrated. All products should conform to the required dimension of delivery tips, zero gradation line position, dimensions and outflow times, graduation markings, color coding, identification markings, and workmanship.
SCOPE
1.1 This specification covers glass serological pipets, used in measuring volumes of liquids.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off
ASTM
ASTM E787-81(2024)(Specification)
Standard Specification for Disposable Glass Micro Blood Collection Pipets

ABSTRACT
This specification covers two dimensionally different (short and long) disposable glass micropipets used primarily to collect whole human blood specimens for clinical analysis and testing. Short and long pipets are available as coated with heparin (Type I) or uncoated (Type II).The pipets shall be fabricated from borosilicate glass, Type I, Class B, or soda lime glass, Type II. Heparin shall be the ammonium salt isolated from the lungs or intestinal mucosa of beef or pork origin and shall meet the specified heparin potency. The physical requirements including design, dimensions, workmanship, color coding, capillarity, fluidity, lot or control number, resistance to centrifugal force, and heparin coating are specified. The following tests shall be performed: capillarity test, fluidity test, sheep plasma test, human whole blood test, resistance to centrifugal force test, and heparin content test. The physical requirements for short Caraway pipet and long Natelson pipet are illustrated as well.
SCOPE
1.1 This specification covers two dimensionally different disposable glass micropipets used primarily to collect whole human blood specimens for clinical analysis and testing. They are available as coated with heparin or uncoated.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off