ASTM F628-00

Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core

SCOPE
1.1 This specification covers coextruded acrylonitrile-butadiene-styrene (ABS) plastic drain, waste, and vent pipe made to Schedule 40 iron pipe sizes (IPS) and produced by the coextrusion process with concentric inner and outer solid ABS layers and the core consisting of closed-cell cellular ABS. Plastic which does not meet the material requirements specified in Section 5 is excluded from single layer and all coextruded layers.  
1.2 Fittings suitable for use with pipe meeting the requirements of this specification are given in Annex A1. Fittings meeting the requirement of Specification D2661 are also acceptable.  
1.3 Acrylonitrile-butadiene-styrene plastic which does not meet the definitions of virgin ABS plastic as given in 3.2.4 is excluded, as performance of plastic other than those defined as virgin was not determined. ABS rework plastic which meets the requirements of rework plastic as given in 5.3 is acceptable.  
1.4 Reprocessed plastic or recycled plastic as defined in Terminology D883 is excluded.  
1.5 Recommendations for storage, joining, and installation are provided in Appendixes X1, X2, and X3, respectively.
1.6 The text of this specification references notes, footnotes, and appendixes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification.  
1.7 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

General Information

• Status: Historical
• Publication Date: 09-Aug-2001
• ICS: 23.040.20 - Plastics pipes
• Technical Committee: F17 - Plastic Piping Systems
• Drafting Committee: F17.63 - DWV

Relations

• Replaced By: ASTM F628-01 - Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
• Effective Date: 10-Aug-2001
• Referred By: ASTM D2235-22 - Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
• Effective Date: 10-Aug-2001
• Referred By: ASTM F412-23 - Standard Terminology Relating to Plastic Piping Systems
• Effective Date: 10-Aug-2001
• Referred By: ASTM F1488-14(2019) - Standard Specification for Coextruded Composite Pipe
• Effective Date: 10-Aug-2001
• Referred By: ASTM F3128-23 - Standard Specification for Poly(Vinyl Chloride) (PVC) Schedule 40 Drain, Waste, and Vent Pipe with a Cellular Core
• Effective Date: 10-Aug-2001
• Referred By: ASTM F2021-17(2022) - Standard Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems
• Effective Date: 10-Aug-2001
• Referred By: ASTM F1499-22 - Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)
• Effective Date: 10-Aug-2001

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or discontinued.
Contact ASTM International (www.astm.org) for the latest information.
Designation: F 628 – 00 An American National Standard
Standard Specification for
Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic
1
Drain, Waste, and Vent Pipe With a Cellular Core
This standard is issued under the fixed designation F 628; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope D 2122 Test Method for Determining Dimensions of Ther-
3
moplastic Pipe and Fittings
1.1 This specification covers coextruded acrylonitrile-
D 2235 Specification for Solvent Cement for Acrylonitrile-
butadiene-styrene (ABS) plastic drain, waste, and vent pipe
3
Butadiene-Styrene (ABS) Plastic Pipe and Fittings
made to Schedule 40 iron pipe sizes (IPS) and produced by the
D 2321 Practice for Underground Installation of Flexible
coextrusion process with concentric inner and outer solid ABS
Thermoplastic Pipe for Sewers and Other Gravity-Flow
layers and the core consisting of closed-cell cellular ABS.
3
Applications
Plastic which does not meet the material requirements specified
D 2412 Test Method for Determination of External Loading
in Section 5 is excluded from single layer and all coextruded
3
Characteristics of Plastic Pipe by Parallel-Plate Loading
layers.
D 2444 Test Method for Impact Resistance of Thermoplas-
1.2 Fittings suitable for use with pipe meeting the require-
3
tic Pipe and Fittings by Means of a Tup (Falling Weight)
ments of this specification are given in Annex A1. Fittings
D 2661 Specification for Acrylonitrile-Butadiene-Styrene
meeting the requirement of Specification D 2661 are also
(ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe
acceptable.
3
and Fittings
1.3 Acrylonitrile-butadiene-styrene plastic which does not
D 3311 Specification for Drain, Waste, and Vent (DWV)
meet the definitions of virgin ABS plastic as given in 3.2.4 is
3
Plastic Fittings Patterns
excluded, as performance of plastic other than those defined as
D 3965 Specification for Rigid Acrylonitrile-Butadiene-
virgin was not determined. ABS rework plastic which meets
4
Styrene (ABS) Compounds for Pipe and Fittings
the requirements of rework plastic as given in 5.3 is acceptable.
5
E 105 Practice for Probability Sampling of Materials
1.4 Reprocessed plastic or recycled plastic as defined in
E 122 Practice for Choice of Sample Size to Estimate a
Terminology D 883 is excluded.
5
Measure of Quality for a Lot or Process
1.5 Recommendations for storage, joining, and installation
F 402 Practice for Safe Handling of Solvent Cements,
are provided in Appendixes X1, X2, and X3, respectively.
Primers, and Cleaners Used for Joining Thermoplastic Pipe
1.6 The text of this specification references notes, footnotes,
3
and Fittings
and appendixes which provide explanatory material. These
3
F 412 Terminology Relating to Plastic Piping Systems
notes and footnotes (excluding those in tables and figures) shall
F 1498 Specification for Taper Pipe Threads 60° for Ther-
not be considered as requirements of the specification.
3
moplastic Pipe and Fittings
1.7 The values stated in inch-pound units are to be regarded
2.2 Federal Standard:
as the standard. The values given in parentheses are for
6
Fed. Std. No. 123 Marking for Shipment (Civil Agencies)
information only.
2.3 Military Standard:
6
2. Referenced Documents MIL-STD-129 Marking for Shipment and Storage
2.1 ASTM Standards:
3. Terminology
D 618 Practice for Conditioning Plastics and Electrical
2 3.1 Definitions—Definitions are in accordance with Termi-
Insulating Materials for Testing
2
nology F 412, and abbreviations are in accordance with Ter-
D 883 Terminology Relating to Plastics
minology D 1600, unless otherwise specified. The abbreviation
D 1600 Terminology for Abbreviated Terms Relating to
2
for acrylonitrile-butadiene-styrene plastic is ABS.
Plastics
2 3.1.1 cellular plastic—a plastic containing numerous cells,
D 1898 Practice for Sampling of Plastics
1
This specification is under the jurisdiction of ASTM Committee F-17 on Plastic
3
Piping Systems and is the direct responsibility of Subcommittee F17.63 on Drain, Annual Book of ASTM Standards, Vol 08.04.
4
Waste, and Vent. Annual Book of ASTM Standards, Vol 08.02.
5
Current edition approved May 10, 2000. Published August 2000. Originally Annual Book of ASTM Standards, Vol 14.02.
e1 6
published as F 628 – 79. Last previous edition F 628 – 99 . Available from Standardization Documents Order Desk, Bldg. 4 Section D, 700
2
Annual Book of ASTM Standards, Vol 08.01. Robbins Ave., Philadelphia, PA 19111-5094, Attn: NPODS.
Copyright © ASTM, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page:
...