ASTM F628-01

Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core

SCOPE
1.1 This specification covers coextruded acrylonitrile-butadiene-styrene (ABS) plastic drain, waste, and vent pipe made to Schedule 40 iron pipe sizes (IPS) and produced by the coextrusion process with concentric inner and outer solid ABS layers and the core consisting of closed-cell cellular ABS. Plastic which does not meet the material requirements specified in Section 5 is excluded from single layer and all coextruded layers.  
1.2 Fittings suitable for use with pipe meeting the requirements of this specification are given in Annex A1. Fittings meeting the requirement of Specification D2661 are also acceptable.  
1.3 Acrylonitrile-butadiene-styrene plastic which does not meet the definitions of virgin ABS plastic as given in 3.2.4 is excluded, as performance of plastic other than those defined as virgin was not determined. ABS rework plastic which meets the requirements of rework plastic as given in 5.3 is acceptable.  
1.4 Reprocessed plastic or recycled plastic as defined in Terminology D883 is excluded.  
1.5 Recommendations for storage, joining, and installation are provided in Appendixes X1, X2, and X3, respectively.
1.6 The text of this specification references notes, footnotes, and appendixes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification.  
1.7 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

General Information

• Status: Historical
• Publication Date: 09-Aug-2001
• ICS: 23.040.20 - Plastics pipes
• Technical Committee: F17 - Plastic Piping Systems
• Drafting Committee: F17.63 - DWV

Relations

• Replaces: ASTM F628-00 - Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
• Effective Date: 10-Aug-2001
• Replaced By: ASTM F628-06 - Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
• Effective Date: 01-Jun-2006
• Referred By: ASTM F412-23 - Standard Terminology Relating to Plastic Piping Systems
• Effective Date: 10-Aug-2001
• Referred By: ASTM F1488-14(2019) - Standard Specification for Coextruded Composite Pipe
• Effective Date: 10-Aug-2001
• Referred By: ASTM F3128-23 - Standard Specification for Poly(Vinyl Chloride) (PVC) Schedule 40 Drain, Waste, and Vent Pipe with a Cellular Core
• Effective Date: 10-Aug-2001
• Referred By: ASTM F2021-17(2022) - Standard Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems
• Effective Date: 10-Aug-2001
• Referred By: ASTM F1499-22 - Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)
• Effective Date: 10-Aug-2001
• Referred By: ASTM D2235-22 - Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
• Effective Date: 10-Aug-2001

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
An American National Standard
Designation: F 628 – 01
Standard Specification for
Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic
1
Drain, Waste, and Vent Pipe With a Cellular Core
This standard is issued under the fixed designation F 628; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope D1600 Terminology for Abbreviated Terms Relating to
2
Plastics
1.1 This specification covers coextruded acrylonitrile-
2
D1898 Practice for Sampling of Plastics
butadiene-styrene (ABS) plastic drain, waste, and vent pipe
D2122 Test Method for Determining Dimensions of Ther-
made to Schedule 40 iron pipe sizes (IPS) and produced by the
3
moplastic Pipe and Fittings
coextrusion process with concentric inner and outer solidABS
D2235 Specification for Solvent Cement for Acrylonitrile-
layers and the core consisting of closed-cell cellular ABS.
3
Butadiene-Styrene (ABS) Plastic Pipe and Fittings
Plasticwhichdoesnotmeetthematerialrequirementsspecified
D2321 Practice for Underground Installation of Thermo-
in Section 5 is excluded from single layer and all coextruded
plastic Pipe for Sewers and Other Gravity-Flow Applica-
layers.
3
tions
1.2 Fittings suitable for use with pipe meeting the require-
D2412 TestMethodforDeterminationofExternalLoading
ments of this specification are given in Annex A1. Fittings
3
Characteristics of Plastic Pipe by Parallel-Plate Loading
meeting the requirement of Specification D2661 are also
D2444 Test Method for Determination of the Impact Re-
acceptable.
sistance of Thermoplastic Pipe and Fittings by Means of a
1.3 Acrylonitrile-butadiene-styrene plastic which does not
3
Tup (Falling Weight)
meet the definitions of virgin ABS plastic as given in 3.2.4 is
D2661 Specification for Acrylonitrile-Butadiene-Styrene
excluded, as performance of plastic other than those defined as
(ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe
virgin was not determined. ABS rework plastic which meets
3
and Fittings
therequirementsofreworkplasticasgivenin5.3isacceptable.
D3311 Specification for Drain, Waste, and Vent (DWV)
1.4 Reprocessed plastic or recycled plastic as defined in
3
Plastic Fittings Patterns
Terminology D883 is excluded.
D 3965 Specification for Rigid Acrylonitrile-Butadiene-
1.5 Recommendations for storage, joining, and installation
4
Styrene (ABS) Materials for Pipe and Fittings
are provided in Appendixes X1, X2, and X3, respectively.
5
E105 Practice for Probability Sampling of Materials
1.6 Thetextofthisspecificationreferencesnotes,footnotes,
E122 Practice for Calculating Sample Size to Estimate,
and appendixes which provide explanatory material. These
With a Specified Tolerable Error, the Average for a
notesandfootnotes(excludingthoseintablesandfigures)shall
5
Characteristic of a Lot or Process
not be considered as requirements of the specification.
F402 Practice for Safe Handling of Solvent Cements,
1.7 The values stated in inch-pound units are to be regarded
Primers,andCleanersUsedforJoiningThermoplasticPipe
as the standard. The values given in parentheses are for
3
and Fittings
information only.
3
F412 Terminology Relating to Plastic Piping Systems
2. Referenced Documents F1498 Specification for Taper Pipe Threads 60° for Ther-
3
moplastic Pipe and Fittings
2.1 ASTM Standards:
2
2.2 Federal Standard:
D618 Practice for Conditioning Plastics for Testing
6
2
Fed. Std. No. 123 Marking for Shipment (Civil Agencies)
D883 Terminology Relating to Plastics
2.3 Military Standard:
1 3
This specification is under the jurisdiction ofASTM Committee F17 on Plastic Annual Book of ASTM Standards, Vol 08.04.
4
Piping Systems and is the direct responsibility of Subcommittee F17.63 on DWV. Annual Book of ASTM Standards, Vol 08.02.
5
Current edition approved August 10, 2001. Published October 2001. Originally Annual Book of ASTM Standards, Vol 14.02.
6
published as F628–79. Last previous edition F628–00. AvailablefromStandardizationDocumentsOrderDesk,Bldg.4SectionD,700
2
Annual Book of ASTM Standards, Vol 08.01. Robbins Ave., Philadelphia, PA 19111-5094, Attn: NPODS.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
F 628–01
6
MIL-STD-129 Marking for Shipment and Storage 5. Materials
5.1 Material Specification—Virgin ABS plastic shall con-
3. Terminology
form to the requirements prescribed in Specification D3965
with a cell classification of 4-2-2-2-2. The color and form of
3.1 Definitions—Definitions are in accordance with Termi-
the material shall be as agreed upon between the seller and the
...